VGA DB15 Male To Screw Terminal Breakout With Case
VGA DB15 Male To Screw Terminal Breakout With Case
VGA DB15 Male To Screw Terminal Breakout With Case
The VGA DB15 Male To Screw Terminal Breakout With Case is a professional-grade adapter that converts a standard 15-pin VGA connector into individual screw terminal connections, enabling direct wiring to custom display systems, industrial control panels, and embedded vision applications. Audio-visual technicians, industrial automation engineers, and systems integrators use this breakout board to simplify signal routing and eliminate the need for proprietary VGA cables in specialized installations. This product solves the critical problem of integrating legacy VGA equipment with custom wiring harnesses while maintaining signal integrity across RGB video channels and synchronization lines.
Product Overview
This VGA DB15 breakout adapter features a male DB15 connector that accepts standard VGA plugs and routes all 15 pins to individual screw terminals for flexible point-to-point wiring. The design maintains proper pin-to-pin isolation and impedance characteristics essential for analog video transmission, supporting resolutions up to 1920x1200 without signal degradation. The included protective case shields the breakout board from dust, moisture, and accidental short circuits during installation and operation in industrial environments.
The screw terminal configuration allows technicians to selectively wire only required signals, bypass unused pins, or integrate additional filtering and protection circuits directly into the signal path. Each terminal accommodates 22-26 AWG wire with secure clamping, providing reliable connections in vibration-prone or mobile installations. The compact form factor and rugged construction make this breakout ideal for OEM integrations, laboratory test setups, and field service applications where standard VGA cables are impractical or unavailable.
Key Specifications
| Specification | Details |
| Product Type | VGA DB15 Male Connector Breakout Board |
| Connector Type | DB15 Male (3-row, 15-pin) |
| Terminal Type | Screw Terminal Blocks |
| Wire Gauge Support | 22-26 AWG |
| Video Resolution Support | Up to 1920x1200 (UXGA) |
| Signal Pins | 5 RGB channels, 2 sync lines, 3 ground pins, 5 additional pins |
| Impedance Matching | 75 ohm video line compatible |
| Protective Enclosure | Included plastic case with mounting provisions |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- DB15 Male Connector Input: Accepts standard VGA cables and monitors with full 15-pin compatibility for seamless integration with existing video equipment
- Individual Screw Terminals: Each of the 15 pins breaks out to labeled screw terminals, enabling selective signal routing and custom wiring configurations without soldering
- Signal Integrity Preservation: Maintains proper impedance and shielding characteristics for analog RGB video transmission with minimal crosstalk and signal loss
- Protective Case Included: Durable plastic enclosure shields the breakout board from environmental contamination and accidental shorts during installation and field deployment
- Pin Identification Labels: Clear labeling of all 15 pins (R, G, B, H-sync, V-sync, grounds, and DDC lines) for quick reference during wiring and troubleshooting
- Compact Design: Space-efficient form factor suitable for panel mounting, DIN rail integration, or embedded system integration with minimal footprint impact
Applications and Use Cases
- Industrial Display Integration: Connect custom industrial monitors and control panels to legacy computer systems by routing individual video and sync signals through existing wiring infrastructure without replacing entire cable runs
- Embedded Vision Systems: Integrate VGA output from embedded boards, medical imaging devices, and scientific instruments into custom display matrices with selective signal conditioning and distribution
- Audio-Visual Installation: Enable flexible routing of VGA signals in complex AV systems, projection mapping setups, and multi-display installations where standard cables cannot reach or accommodate
- Laboratory Test and Measurement: Facilitate signal analysis and monitoring of VGA video signals by providing direct access to RGB channels, synchronization signals, and DDC communication lines for oscilloscope and logic analyzer connections
- Legacy Equipment Modernization: Bridge aging VGA-only devices with modern digital displays through custom signal conversion and conditioning circuits integrated at the breakout point
- Vehicle and Mobile Systems: Provide robust wired video connections in moving platforms where cable flexing and vibration would damage standard VGA connectors
How to Use
Begin by powering down all connected video equipment and inserting the VGA cable from your video source (computer, camera, or display device) into the DB15 male connector on the breakout board. Identify the required signal pins using the included pin identification labels: red, green, and blue video channels (pins 1, 2, 3), horizontal and vertical synchronization signals (pins 13, 14), and ground connections (pins 5, 6, 7, 10, 11, 15). Strip approximately 5mm of insulation from each wire you intend to connect, insert the wire into the corresponding screw terminal, and tighten the terminal screw firmly until the wire is mechanically secure and cannot be pulled free.
For standard VGA display connections, connect the RGB video signals to your display input stage, the sync signals to your timing circuit, and ensure all ground pins are properly bonded together and connected to your system ground plane. If implementing signal conditioning, filtering, or distribution, integrate those components between the breakout terminals and your downstream circuitry. Once all connections are complete and verified for correctness, place the breakout board in the protective case, secure any cables with cable ties to prevent accidental disconnection, and power on your equipment to verify video signal transmission. Test video quality at your target resolution to confirm proper signal integrity before deploying in production applications.
Frequently Asked Questions
What is the maximum wire gauge I can connect to the screw terminals?
The screw terminals are designed to accommodate 22-26 AWG wire, which is the standard gauge for VGA signal wiring. This range provides optimal contact pressure and mechanical security. Using wire larger than 26 AWG may prevent proper terminal closure, while wire smaller than 22 AWG may not provide sufficient contact area for reliable connections in high-vibration environments.
Can I use this breakout board for DVI or HDMI signals?
No, this breakout board is specifically designed for analog VGA signals only. DVI and HDMI use different connector types and signal protocols. DVI carries digital video data and requires impedance-matched differential pair routing, while HDMI is a completely different digital standard. Using this board for DVI or HDMI would result in no signal transmission or severe signal degradation.
Does this breakout support DDC communication for plug-and-play display detection?
Yes, pins 12 and 15 on the DB15 connector carry the DDC (Display Data Channel) signals, which are I2C-based communication lines. These pins are accessible via the screw terminals, allowing you to route DDC signals to your video source for automatic display detection and EDID reading. Ensure proper pull-up resistors (typically 4.7k ohm) are present on your DDC lines for reliable communication.
What signal levels should I expect on the RGB video channels?
Standard VGA video signals use 0-0.7V peak-to-peak analog signals on the RGB channels, with a 75 ohm impedance. The sync signals (H-sync and V-sync) are typically 0-5V TTL-level signals. Ensure your connected circuitry is designed to handle these voltage levels and impedance characteristics to maintain proper video quality and prevent signal reflections.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy VGA DB15 Male To Screw Terminal Breakout With Case Online in India
Purchase the VGA DB15 Male To Screw Terminal Breakout With Case online at The Tech Depot, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on VGA DB15 Male To Screw Terminal Breakout With Case with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.