SmartElex L298N Motor Driver with Onboard Arduino Uno.
SmartElex L298N Motor Driver with Onboard Arduino Uno.
Shipping calculated at checkout.
Specifications
- Microcontroller: ATmega328P (Arduino Uno compatible)
- Motor driver: L298N dual H-bridge
- Continuous current: 1.2A per channel (peak 4A total)
- Motor voltage: 7V-12V
- Logic: 5V (USB programmable)
- Onboard SMPS: 5V 3A buck converter
- Servo/sensor headers: 3-pin (Sig/V/G) on all digital pins
- Line sensor connector: JST 8-pin for RLS-06
- USB: Type-B for programming
| Motor Driver IC | L298N dual H-bridge |
| Max Motor Voltage | Up to 46V (per L298N datasheet) |
| Max Current | Up to 2A continuous per channel (4A peak) |
| Onboard MCU | ATmega328P (Arduino Uno-compatible) |
| Channels | 2 DC motor / 1 stepper motor |
Why Choose SmartElex L298N Motor Driver with Onboard Arduino Uno.?
100% Authentic - Sourced from authorized distributors, fully verified before dispatch.
GST Invoice - A GST invoice is included with every order.
Expert Support - Dedicated technical help on WhatsApp and email.
Pan-India Delivery - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.
Trusted by Makers - Used by students, hobbyists and professionals nationwide.
Key Features of SmartElex L298N Motor Driver with Onboard Arduino Uno.
- SmartElex L298N Motor Driver with onboard Arduino Uno
- Q: Can I program it with the standard Arduino IDE?
- Q: What is the maximum motor stall current?
- Q: Does the RLS-08 line sensor work directly with this board?
- Q: Is a servo motor connectable?
- Combines an Arduino Uno-compatible controller and an L298N driver on one board — no separate shield needed
- Drives two DC motors independently or one bipolar stepper motor
- Programmable directly with the standard Arduino IDE
- Screw terminals simplify motor and power wiring for robotics builds
Perfect For
- Driving DC/brushed motors in mobile robots and robotics platforms
- Combat/battle robot and robot-rumble style projects needing bidirectional motor control
- DIY robotics and mechatronics prototyping with Arduino or Raspberry Pi
- DIY robot cars and chassis platforms
- Small conveyor or actuator control projects
- Educational robotics kits
- Stepper-motor driven mechanisms (CNC-style small axes)
SmartElex L298N Motor Driver with Onboard Arduino Uno - All-in-One Robot Controller
Stop wiring separate motor shields onto your Arduino. The SmartElex L298N Motor Driver with onboard Arduino Unointegrates both on a single PCB - giving you an ATmega328P microcontroller, dual L298N H-bridge motor control, a 5V 3A SMPS buck converter, and servo/sensor headers on every digital pin.
Why this beats separate boards
Using a standalone Arduino + motor shield means two boards, two power rails, and 10+ jumper wires. The SmartElex integrated board eliminates all of that with a shared power bus and pre-wired headers. The 5V 3A SMPS means your sensors don't brown out when motors draw peak current.
Real-world projects
1. Line Following Robot
Plug SmartElex RLS-08 directly into the onboard JST connector - no extra wiring needed.
2. Obstacle Avoidance Robot
Connect HC-SR04 ultrasonic to the sensor headers and program in Arduino IDE in minutes.
3. Bluetooth Remote Controlled Car
Use a Bluetooth module on a serial pin for RC control via smartphone app.
How it compares
Separate Arduino Uno (Rs.400) + L298N shield (Rs.350) = Rs.750+ with messy wiring. The SmartElex integrated board at Rs.656.70 saves money and space. Tech Depot India sells the same for Rs.885 - you save Rs.228 here.
Frequently Asked Questions
Q: Can I program it with the standard Arduino IDE?
A: Yes. Select "Arduino Uno" in the IDE - it uses the same ATmega328P with identical bootloader.
Q: What is the maximum motor stall current?
A: The L298N handles up to 2A peak per channel, 4A total. Use motors rated under 1.2A continuous for best results.
Q: Does the RLS-08 line sensor work directly with this board?
A: Yes via the 8-pin JST connector. The RLS-06 is the primary supported sensor; RLS-08 works with the same connector.
Q: Is a servo motor connectable?
A: Yes - every digital pin has a 3-pin Sig/V/G header for direct servo or sensor connection.
Is technical support available?
Yes, responsive support via email and WhatsApp for setup, troubleshooting, and application guidance.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Customer Support
Email: techdepotindia@gmail.com
WhatsApp: Available for setup and troubleshooting help
Order your SmartElex L298N Motor Driver with Onboard Arduino Uno. today and start building your next project.