Pultruded Carbon Fibre Rod (Solid) 3mm * 1000mm (Pack of 4)
Pultruded Carbon Fibre Rod (Solid) 3mm * 1000mm (Pack of 4)
Pultruded Carbon Fibre Rod (Solid) 3mm * 1000mm (Pack of 4)
The Pultruded Carbon Fibre Rod is a high-performance solid composite material manufactured through continuous pultrusion process, delivering exceptional strength-to-weight ratio and dimensional stability. Aerospace engineers, robotics developers, and precision instrument manufacturers rely on these rods for structural applications requiring superior rigidity without adding bulk. This product solves the critical engineering challenge of achieving maximum load-bearing capacity while minimizing weight in applications ranging from drone frames to precision measurement systems.
Product Overview
Pultruded carbon fibre rods are manufactured by pulling continuous carbon fibre strands through a resin bath and heated die, creating a solid composite with unidirectional fibre alignment. This manufacturing process ensures consistent cross-sectional properties, minimal void content, and superior fibre-to-resin ratio compared to other production methods. The 3mm diameter solid rod provides excellent bending stiffness and tensile strength while maintaining ease of machining and integration into complex assemblies. The pultrusion process creates a dense, homogeneous structure with tensile strength exceeding 1200 MPa and flexural modulus around 60-70 GPa, making it ideal for precision engineering applications.
Our 1000mm length rods come in a convenient pack of 4, providing sufficient material for multiple projects or component prototyping. The solid construction eliminates concerns about hollow core degradation and provides consistent performance across the entire length. Carbon fibre's inherent properties include excellent fatigue resistance, superior damping characteristics, and complete immunity to corrosion and electromagnetic interference. The material maintains structural integrity across wide temperature ranges from -50°C to 120°C, making it suitable for both indoor laboratory environments and outdoor field applications.
Key Specifications
| Specification | Details |
| Product Type | Pultruded Carbon Fibre Solid Rod |
| Diameter | 3mm |
| Length | 1000mm per rod |
| Quantity | Pack of 4 rods |
| Material Composition | Carbon Fibre Reinforced Polymer (CFRP) with epoxy resin matrix |
| Manufacturing Process | Continuous Pultrusion |
| Tensile Strength | 1200+ MPa |
| Flexural Modulus | 60-70 GPa |
| Density | Approximately 1.6 g/cm3 |
| Surface Finish | Smooth, precision-ground |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- Exceptional Strength-to-Weight Ratio: Delivers tensile strength exceeding 1200 MPa while maintaining minimal weight, ideal for weight-critical aerospace and robotics applications
- Unidirectional Fibre Alignment: Pultrusion process ensures consistent fibre orientation along rod length, providing superior axial load-bearing capacity and predictable engineering performance
- Precision Dimensional Tolerance: Solid construction with tight tolerances ensures perfect fit in mechanical assemblies, bearing housings, and precision instrument components
- Excellent Machinability: Can be cut, drilled, and threaded using standard machine tools without special equipment or fibre splintering issues
- Complete Corrosion Immunity: Epoxy resin matrix provides absolute protection against moisture, salt spray, and chemical exposure in harsh environments
- Superior Damping Characteristics: Carbon fibre's inherent vibration absorption reduces resonance and improves precision in measurement and sensing applications
Applications and Use Cases
- Drone and UAV Frame Construction: Use as structural spars and reinforcement elements in multirotor and fixed-wing designs, providing rigidity without adding weight that reduces flight time
- Precision Measurement Instruments: Ideal for callipers, gauges, and sensor mounting arms where dimensional stability and low thermal expansion are critical for accuracy
- Robotics and Automation: Employ as actuator rods, joint linkages, and structural supports in collaborative robots and industrial automation systems requiring high stiffness-to-weight ratios
- Aerospace Component Fabrication: Suitable for control surface reinforcement, antenna masts, and structural spacers in aircraft and satellite applications where weight reduction directly improves performance
- Medical Device Assembly: Use in surgical instrument handles, positioning arms, and diagnostic equipment frameworks where biocompatibility and precision are essential
- High-Performance Sporting Equipment: Ideal for archery arrow shafts, fishing rod blanks, and bicycle frame reinforcement where performance gains justify material costs
How to Use
Begin by measuring and marking your required length on the carbon fibre rod using a fine-tip marker or masking tape. For cutting, use a fine-toothed hacksaw, bandsaw with metal-cutting blade, or rotary tool with cutting disc, maintaining steady pressure to prevent fibre fraying at cut edges. Always wear safety glasses and a dust mask during cutting and machining operations, as carbon fibre particles can cause respiratory irritation. For drilling, use standard twist drills or brad-point bits at moderate speeds (500-1500 RPM depending on drill size), applying steady downward pressure without forcing. Use cutting fluid or coolant to reduce heat generation and extend tool life.
When installing the rod in mechanical assemblies, ensure mounting points provide adequate support to prevent cantilever bending beyond the material's design limits. For threaded connections, hand-tap threads at the rod ends using appropriate metric or imperial taps, applying cutting fluid throughout the process. Avoid over-tightening fasteners, as excessive clamping force can cause micro-cracking in the resin matrix. For adhesive bonding, prepare surfaces with light sanding using 220-grit sandpaper, clean thoroughly with isopropyl alcohol, and use epoxy or structural adhesives specifically formulated for composite materials. Allow full cure time before subjecting bonded assemblies to load.
Frequently Asked Questions
What is the difference between pultruded and other carbon fibre rod manufacturing methods?
Pultruded rods are manufactured by continuously pulling carbon fibre strands through a resin bath and heated die, creating unidirectional fibre alignment with consistent properties throughout the length. This differs from filament winding (which creates hollow tubes with helical wrapping) and hand-laid methods (which have variable fibre orientation and higher void content). Pultrusion delivers superior axial strength, dimensional consistency, and cost-effectiveness for solid rod applications, making it the preferred method for precision engineering components.
Can I machine, drill, and cut this carbon fibre rod with standard tools?
Yes, pultruded carbon fibre rods can be machined using conventional metalworking equipment including hacksaws, bandsaws, drill presses, and lathes. However, use slower speeds than for metals (500-1500 RPM for drilling) and maintain sharp cutting tools to minimize fibre splintering. Always wear respiratory protection when machining, as carbon dust particles can cause irritation. Cutting fluid or coolant helps reduce heat and extends tool life. The solid construction makes it much easier to machine compared to hollow carbon fibre tubes.
What is the maximum load this 3mm rod can safely support?
The 3mm solid pultruded carbon fibre rod can support approximately 8-10 kg of direct axial load before reaching yield stress, assuming proper support and no bending moments. However, actual load capacity depends on application geometry, support conditions, and safety factors. For cantilever applications, maximum load is significantly lower due to bending stress concentration. We recommend consulting engineering calculations or contacting our technical team with specific application details to determine safe load limits for your project.
Is this carbon fibre rod suitable for outdoor use and harsh environments?
Yes, the epoxy resin matrix provides complete protection against moisture, salt spray, UV radiation, and most chemical exposures. Carbon fibre itself is inherently corrosion-resistant and will not rust or degrade in outdoor conditions. However, prolonged UV exposure can degrade the epoxy resin over extended periods (several years). For permanent outdoor installations, consider applying UV-protective clear coating or paint to extend service life. The material performs excellently in marine, industrial, and extreme temperature environments.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Pultruded Carbon Fibre Rod (Solid) 3mm * 1000mm (Pack of 4) Online in India
Purchase the Pultruded Carbon Fibre Rod (Solid) 3mm * 1000mm (Pack of 4) online at The Tech Depot, India's trusted source for genuine electronics and engineering materials. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Pultruded Carbon Fibre Rod (Solid) 3mm * 1000mm (Pack of 4) with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.