Pultruded Carbon Fiber Tube (Hollow) 12mm(OD) * 10mm(ID) * 1000mm(L)(Pack of 2)

This pultruded carbon fiber hollow tube is a lightweight structural component featuring a 12mm outer diameter with a 10mm inner diameter and 1000mm length, supplied in a pack of two units. Professional engineers and aerospace technicians utilize these tubes in precision applications requiring high strength-to-weight ratios and exceptional stiffness without adding significant mass. The product solves critical engineering challenges in drone construction, robotic arms, high-performance sporting equipment, and aerospace structural assemblies where material efficiency and dimensional stability are paramount.

Product Overview

Pultruded carbon fiber tubes are manufactured through a continuous pultrusion process where carbon fiber strands are drawn through a resin matrix and then through a heated die, creating a composite structure with consistent fiber orientation along the length. This manufacturing method produces tubes with superior longitudinal strength, excellent dimensional tolerance, and minimal void content. The hollow design provides maximum rigidity with minimal weight, making these tubes ideal for applications demanding precision engineering and weight optimization. The 1mm wall thickness (calculated from 12mm OD and 10mm ID) delivers an optimal balance between structural integrity and material efficiency.

The pultruded construction ensures uniform fiber distribution and superior resin impregnation compared to filament-wound alternatives, resulting in better fatigue resistance and more predictable mechanical properties. These tubes exhibit exceptional tensile strength exceeding 600 MPa and a modulus of elasticity around 230 GPa, making them suitable for load-bearing structural applications. The pack of two units provides flexibility for dual-axis assemblies, redundant systems, or prototype development with minimal inventory commitment. Surface finish is smooth and ready for immediate integration into assemblies without additional machining.

Key Specifications

Key Features

• Exceptional strength-to-weight ratio with tensile strength exceeding 600 MPa while maintaining minimal density of approximately 1.6 g/cm3, enabling weight reduction of up to 80 percent compared to aluminum alternatives
• Consistent dimensional tolerance and uniform fiber orientation from pultrusion manufacturing, ensuring repeatable mechanical properties and precise fit in assembly applications without secondary machining
• High modulus of elasticity around 230 GPa provides superior rigidity and resistance to bending, critical for precision applications requiring minimal deflection under load
• Hollow design with 1mm wall thickness optimizes material usage while maintaining structural integrity, perfect for applications where every gram of weight matters
• Smooth surface finish ready for immediate integration, eliminating costly post-processing and reducing time-to-assembly in production environments
• Excellent chemical and corrosion resistance, suitable for marine, automotive, and outdoor applications without protective coating requirements

Applications and Use Cases

• Drone and unmanned aerial vehicle construction where fuselage booms and structural frames require maximum stiffness with minimal weight to extend flight duration and payload capacity
• Robotic arm segments and precision mechanical linkages in industrial automation where repeatable positioning and minimal deflection under dynamic loads are essential for accuracy
• Aerospace structural components including wing spars, fuselage reinforcement, and control surface frames where weight reduction directly improves fuel efficiency and performance
• High-performance sporting equipment such as carbon fiber bicycle frames, fishing rods, and archery equipment where strength-to-weight optimization enhances user performance
• Precision measurement instruments and laboratory equipment requiring dimensional stability and minimal thermal expansion across temperature ranges
• Automotive suspension components and chassis reinforcement in motorsports applications where lightweight construction improves acceleration and handling characteristics

How to Use

Begin by inspecting both tubes for any surface damage or delamination before integration into your assembly. Measure and mark cutting points using a fine-tipped marker if length modification is required. Carbon fiber tubes can be cut using a fine-toothed hacksaw, diamond-coated band saw, or carbide-tipped rotary tools with water cooling to prevent resin degradation and fiber fraying. Always wear appropriate personal protective equipment including safety glasses and a dust mask, as carbon fiber particles can irritate respiratory systems.

For assembly, clean the tube surfaces with isopropyl alcohol to remove any dust or contaminants before bonding or mechanical connection. When using adhesive bonding, select epoxy resins specifically formulated for carbon fiber composites and follow manufacturer curing instructions precisely. For mechanical connections, use stainless steel fasteners to prevent galvanic corrosion, and ensure fastener holes are drilled with carbide bits at low speeds with coolant to prevent delamination. Allow adequate curing time before subjecting assemblies to load, typically 24 hours for epoxy adhesives at room temperature. Verify structural integrity through visual inspection and non-destructive testing methods appropriate to your application before deployment.

Frequently Asked Questions

Why Buy from The Tech Depot

• Genuine Products: Sourced directly from authorized distributors with authentication
• Expert Team: Our technical team validates every product before listing
• Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
• Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
• Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
• Technical Support: 24/7 expert guidance via email and WhatsApp
• Returns: 7-day return policy on manufacturing defects only

Buy Pultruded Carbon Fiber Tube (Hollow) 12mm(OD) * 10mm(ID) * 1000mm(L)(Pack of 2) Online in India

Purchase the Pultruded Carbon Fiber Tube (Hollow) 12mm(OD) * 10mm(ID) * 1000mm(L)(Pack of 2) online at The Tech Depot, India's trusted source for genuine electronics and engineering components. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Pultruded Carbon Fiber Tube (Hollow) 12mm(OD) * 10mm(ID) * 1000mm(L)(Pack of 2) with fast shipping and expert support.

Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion. Whether you are building aerospace components, robotics systems, or high-performance equipment, we provide authentic pultruded carbon fiber tubes with guaranteed quality and technical expertise to ensure your project success.