PL2303 USB-TTL Converter
PL2303 USB-TTL Converter
Reliable USB-to-TTL serial converter powered by the Prolific PL2303 chipset. Enables seamless UART communication between your PC and microcontrollers, routers, GPS modules, and other TTL-level serial devices - essential for debugging, programming, and data logging. From The Tech Depot, Bengaluru. Fast shipping, 7-day warranty on manufacturing defects, and dedicated technical support.
Specifications
| Chipset | Prolific PL2303 (HX/HXD variant) |
| Interface | USB 2.0 Full Speed to TTL UART |
| Logic Levels | 3.3V / 5V TTL (check module variant) |
| Baud Rate Range | 75 bps to 6 Mbps |
| Signals Supported | TXD, RXD, GND (some modules include VCC, DTR, RTS, CTS) |
| Connector | USB-A male; pin header / DuPont female for TTL side |
| OS Compatibility | Windows (7/8/10/11), Linux, macOS (driver required) |
| Operating Voltage | 5V from USB bus |
| ESD Protection | Built-in on USB lines |
| Dimensions (approx.) | Compact cable-style or breakout-board module |
| Type | USB-TTL Serial Converter Module |
| Origin | Original/Authentic PL2303 Chipset |
| Warranty | 7-day warranty on manufacturing defects |
| Support | Email & WhatsApp 24/7 |
Why Choose This?
- Genuine PL2303 chipset - stable drivers, no counterfeit-chip headaches or "Code 10" errors
- Plug-and-play UART access - instantly talk to Arduino, ESP8266/ESP32, STM32, Raspberry Pi serial console, and more
- Wide baud rate support - from 75 bps up to 6 Mbps for high-speed data transfer
- Compact & durable design - lightweight module ideal for bench work and field deployment
- Cross-platform drivers - works on Windows, Linux, and macOS with freely available Prolific drivers
- 100% authentic from trusted suppliers
- 1-5 day shipping, 7-8 day delivery from Bengaluru warehouse
- Expert technical support included
Key Features
- Full-duplex UART communication via virtual COM port
- Hardware flow control lines (RTS/CTS) on supported modules
- DTR pin available for auto-reset on Arduino-compatible boards
- Onboard TX/RX LED indicators for real-time data flow monitoring
- Hot-swappable USB connection - no system restart needed
- Low power consumption - bus-powered, no external supply required
Project Ideas
- Microcontroller Programming & Debugging: Upload firmware to Arduino Pro Mini, ESP-01, STM32 Blue Pill, and bare ATmega chips via serial bootloader.
- Raspberry Pi Serial Console: Access the Pi's command line over UART - perfect for headless setup and kernel-level debugging.
- Router & OpenWrt Configuration: Connect to the serial console of routers and networking equipment for firmware recovery and advanced configuration.
- GPS & Sensor Data Logging: Read NMEA data from GPS modules or stream sensor readings to your PC for analysis and visualization.
- GSM/SIM Module Communication: Send AT commands to SIM800, SIM900, and other cellular modules for IoT and SMS projects.
- Embedded Linux & SBC Debugging: Monitor boot logs and interact with U-Boot on single-board computers and custom embedded platforms.
- Learning & Education: Ideal for students learning UART protocol, serial communication fundamentals, and embedded systems development.
How to Use
- Install Driver: Download the latest PL2303 driver from the Prolific website and install on your OS.
- Connect TTL Side: Wire TXD, RXD, and GND to your target device (cross TX->RX, RX->TX). Match voltage levels (3.3V or 5V).
- Plug into USB: Insert the USB-A connector into your computer. A new COM port (Windows) or /dev/ttyUSB0 (Linux) will appear.
- Open Serial Terminal: Use Arduino IDE Serial Monitor, PuTTY, Tera Term, or minicom. Set the correct baud rate (e.g., 9600, 115200).
- Communicate: Send and receive serial data. Monitor TX/RX LEDs for confirmation of data flow.
What's in the Box
Frequently Asked Questions
When will I receive my order?
Products ship within 1-5 days from our Bengaluru warehouse. Delivery within 7-8 days to most locations across India.
Is technical support available?
Yes, 24/7 support via email and WhatsApp for setup, troubleshooting, and application guidance.
What is your return policy?
7-day returns on manufacturing defects only. Full refund or replacement. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.
Buy PL2303 USB-TTL Converter Online in India
Purchase the PL2303 USB-TTL Converter online at The Tech Depot - India's most trusted electronics components store. We deliver across all major cities including Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on PL2303 USB-TTL Converter with fast 1-5 day shipping from our Bengaluru warehouse. All products are 100% authentic, sourced from authorized distributors with 7-day warranty on manufacturing defects.
Looking to buy PL2303 USB-TTL Converter at the best price in India? The Tech Depot offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.