KCP-X-S08 Kamoer Lab Pump 24V 1A – S08 – 17~50ml/min | Silicone tube 2.5*4.5mm
KCP-X-S08 Kamoer Lab Pump 24V 1A – S08 – 17~50ml/min | Silicone tube 2.5*4.5mm
KCP-X-S08 Kamoer Lab Pump 24V 1A – S08 – 17~50ml/min | Silicone tube 2.5*4.5mm
The KCP-X-S08 Kamoer Lab Pump is a precision peristaltic pump designed for accurate fluid dispensing in laboratory and analytical applications, featuring a 24V DC motor with 1A current draw and variable flow rate of 17 to 50 ml/min. Laboratory technicians, researchers, and analytical equipment manufacturers rely on this pump for consistent, pulsation-free liquid transfer in chromatography systems, automated analyzers, and fluid handling automation. This pump solves the critical challenge of maintaining precise volumetric flow control while minimizing sample contamination and ensuring reproducible results in sensitive analytical procedures.
Product Overview
The KCP-X-S08 operates on peristaltic pump technology, where a rotating rotor with rollers progressively compresses a silicone tube against a stationary housing, creating a positive displacement action that moves fluid forward without allowing backflow. This design principle ensures that the pumped liquid never contacts the pump mechanism itself, making it ideal for corrosive, viscous, or contamination-sensitive applications. The 24V DC power supply provides stable operation with minimal electrical noise, while the 1A current rating indicates efficient energy consumption suitable for battery-backed or regulated power systems in laboratory environments.
The S08 model designation refers to the specific rotor and housing configuration optimized for the 2.5mm inner diameter by 4.5mm outer diameter silicone tubing, which directly determines the pump's displacement volume per revolution and achieves the 17 to 50 ml/min flow rate range through variable speed control. The silicone tube material offers excellent chemical compatibility with aqueous solutions, organic solvents, and mild acids while maintaining flexibility and durability through thousands of compression cycles. This pump excels in applications requiring low pulsation, high accuracy, and maintenance-free operation compared to traditional gear or diaphragm pumps.
Key Specifications
| Specification | Details |
| Product Type | Peristaltic Lab Pump |
| Brand | Kamoer |
| Model | KCP-X-S08 |
| Power Supply | 24V DC |
| Current Rating | 1A Maximum |
| Flow Rate Range | 17 to 50 ml/min |
| Tube Specification | Silicone 2.5mm ID x 4.5mm OD |
| Pump Type | Peristaltic Positive Displacement |
| Control Method | Variable Speed PWM Compatible |
| Material Contact | Food Grade Silicone Tubing |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- Precise Flow Control: Variable speed capability from 17 to 50 ml/min enables accurate dispensing for titrations, sample injection, and reagent addition in analytical instruments
- Peristaltic Technology: Positive displacement design eliminates backflow and ensures consistent volumetric accuracy without fluid contact with pump internals, critical for contamination-sensitive applications
- Low Power Consumption: 24V 1A specification makes this pump suitable for portable laboratory equipment, battery-backed systems, and power-limited environments
- Chemical Compatible Tubing: Food-grade silicone tube resists aqueous solutions, organic solvents, weak acids, and alcohols while maintaining flexibility through extended use cycles
- Compact Design: Lightweight construction with integrated mounting provisions allows seamless integration into automated systems, analytical instruments, and benchtop equipment
- Maintenance Free Operation: No seals, valves, or moving parts in the fluid path eliminates routine maintenance and extends service life in continuous operation scenarios
Applications and Use Cases
- Liquid Chromatography Systems: Delivers precise mobile phase flow rates in HPLC and UPLC instruments where flow consistency directly impacts separation resolution and reproducibility
- Automated Clinical Analyzers: Dispenses reagents and samples with high accuracy in biochemistry, immunoassay, and hematology analyzers where volumetric precision ensures diagnostic accuracy
- Laboratory Automation: Powers fluid handling in robotic sample preparation systems, high-throughput screening platforms, and automated titration equipment for consistent results
- Microfluidic and Microreactor Applications: Enables precise flow control in microfluidic chips, continuous flow synthesis reactors, and lab-on-chip devices for chemical and biological research
- Peristaltic Infusion Systems: Provides accurate drug and nutrient delivery in laboratory-scale bioreactor systems, fermentation monitoring, and cell culture perfusion applications
How to Use
Begin setup by inserting the silicone tubing (2.5mm ID x 4.5mm OD) into the pump head, ensuring the tube sits properly in the rotor channel and makes full contact with the compression rollers. Connect the 24V DC power supply to the pump terminals, observing correct polarity to prevent damage. For variable speed operation, connect a PWM controller or variable DC power supply to modulate the pump speed between minimum and maximum flow rates. Prime the pump by running it for 10-15 seconds with the inlet tube submerged in the fluid to be pumped, allowing air to escape from the tubing and pump chamber before connecting to your application system.
During operation, monitor the silicone tubing for any visible wear, discoloration, or loss of flexibility, which indicates the need for tube replacement. Typical tube life ranges from 6 to 12 months depending on fluid chemistry and continuous operating hours. For applications using corrosive or aggressive chemicals, inspect tubing weekly and replace if degradation appears. Always maintain adequate fluid supply in the inlet reservoir and ensure the outlet line is free from blockages to prevent pump cavitation. After use, flush the pump and tubing with distilled water or appropriate solvent to prevent fluid crystallization and maintain performance consistency for your next application.
Frequently Asked Questions
What is the maximum backpressure this pump can handle?
The KCP-X-S08 peristaltic pump can tolerate backpressure up to approximately 0.8 bar (12 psi) without tube rupture or pump damage. For applications exceeding this pressure, ensure your outlet line is unrestricted and contains no kinks or blockages. Sustained high backpressure will accelerate silicone tube degradation and reduce service life. If your application requires higher pressure, consider using reinforced tubing or upgrading to a higher-pressure pump model.
Can this pump handle viscous fluids or suspensions?
Yes, the KCP-X-S08 is well-suited for viscous liquids up to approximately 5000 cP (centipoise) and thin suspensions with particle sizes below 100 microns. The peristaltic mechanism's positive displacement design handles viscous fluids better than centrifugal pumps. However, very thick fluids or those containing large particles may reduce flow rate and increase motor load. For highly viscous applications, verify that your power supply can sustain the 1A current draw during operation, and monitor motor temperature to prevent thermal shutdown.
How do I control the flow rate precisely?
Flow rate is directly proportional to pump speed, which can be controlled using a PWM (Pulse Width Modulation) controller or variable DC power supply. Most users employ a 0-24V variable power supply or PWM controller module to achieve smooth speed adjustment from 0 to 100 percent, corresponding to 0 to 50 ml/min flow rates. For digital control, connect the pump to a microcontroller PWM output through a relay or MOSFET driver. Calibrate your system by measuring actual flow output at various voltage or PWM settings to establish a precise control curve for your application.
What chemicals is the silicone tubing compatible with?
The food-grade silicone tubing is compatible with water, aqueous solutions, ethanol, methanol, acetone, acetonitrile, weak acids (pH 2-8), weak bases, and most organic solvents. It is NOT recommended for strong mineral acids, strong bases, or aromatic hydrocarbons like benzene and toluene, which can cause swelling or degradation. Always test tubing compatibility with your specific fluid before extended operation. For incompatible fluids, upgrade to Tygon or PTFE tubing alternatives, though these may require a different pump model.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India. You will receive tracking information via email and SMS once your order ships. Express delivery options may be available for urgent requirements; contact our sales team for expedited shipping quotes.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. This warranty covers defects in pump motor function, rotor assembly, and housing integrity. It does not apply to tubing wear, user damage, improper installation, or misuse. Damage from overvoltage, reverse polarity, or exposure to incompatible chemicals is excluded from warranty coverage.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units is available. Contact our sales team via WhatsApp or email for a customized bulk quote. Volume discounts increase with order quantity and may include technical support packages for system integration and calibration assistance.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication certificates and traceability documentation
- Expert Team: Our technical team validates every product before listing and provides application-specific guidance for your laboratory setup
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse with real-time tracking
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat
- Payment Options: COD, UPI, credit/debit cards, net banking, and EMI available for flexible purchasing
- Technical Support: 24/7 expert guidance via email and WhatsApp for setup, troubleshooting, and application optimization
- Returns: 7-day return policy on manufacturing defects with hassle-free replacement or refund
Buy KCP-X-S08 Kamoer Lab Pump 24V 1A – S08 – 17~50ml/min | Silicone tube 2.5*4.5mm Online in India
Purchase the KCP-X-S08 Kamoer Lab Pump 24V 1A – S08 – 17~50ml/min | Silicone tube 2.5*4.5mm online at The Tech Depot, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.