Kamoer KPP2 – 24VDC In-0.27A – B06 Peristaltic Pump
Kamoer KPP2 – 24VDC In-0.27A – B06 Peristaltic Pump
Kamoer KPP2 – 24VDC In-0.27A – B06 Peristaltic Pump
The Kamoer KPP2 is a compact 24VDC peristaltic pump designed for precise, low-volume fluid transfer applications requiring consistent flow rates and minimal pulsation. Laboratory technicians, aquarium automation specialists, and industrial process engineers rely on this pump for accurate dosing of chemicals, nutrients, and reagents in controlled environments. This pump solves the critical challenge of delivering micro to small quantities of fluids without contamination or backflow, making it essential for applications where accuracy and reliability directly impact experimental or operational outcomes.
Product Overview
The Kamoer KPP2 operates on the peristaltic pump principle, where a rotating rotor with rollers progressively compresses a silicone tube to create a unidirectional flow without the fluid ever contacting pump components. This design eliminates cross-contamination risks and allows the pump to handle corrosive, viscous, or abrasive liquids that would damage traditional centrifugal or gear pumps. The 24VDC power specification makes it compatible with standard industrial control systems, battery-backed setups, and low-voltage laboratory environments, while the 0.27A current draw ensures minimal power consumption and compatibility with standard power supplies.
The B06 tubing configuration in this model supports flow rates typically in the range of 0.6-2.4 mL/min, making it ideal for precision dosing applications in aquaponics, hydroponics, laboratory automation, and medical device prototyping. The pump features a compact form factor that integrates seamlessly into custom automation rigs, and its brushless motor design ensures long operational life with reduced maintenance requirements. Unlike traditional pumps, the peristaltic mechanism provides inherent check-valve functionality, preventing backflow when power is removed, which is critical for gravity-fed or multi-stage fluid delivery systems.
Key Specifications
| Specification | Details |
| Product Type | Peristaltic Pump - Compact Laboratory Grade |
| Brand | Kamoer |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
| Input Voltage | 24VDC |
| Input Current | 0.27A |
| Tubing Configuration | B06 Silicone Tube |
| Flow Rate Range | 0.6 to 2.4 mL/min (adjustable) |
| Operating Temperature | 0 to 50 degrees Celsius |
| Fluid Compatibility | Water, oils, acids, bases, viscous liquids |
Key Features
- Low-voltage 24VDC operation with minimal 0.27A current draw, enabling integration with battery-backed systems and standard laboratory power supplies without additional infrastructure
- Peristaltic tube design eliminates fluid contact with pump internals, preventing contamination and enabling safe handling of corrosive, toxic, and biological fluids
- Adjustable flow rate control via external PWM signal or manual speed adjustment, allowing precise micro-dosing from 0.6 mL/min up to 2.4 mL/min for reproducible experiments
- Built-in check-valve functionality prevents backflow and siphoning when pump is powered off, critical for gravity-fed or stacked multi-pump automation systems
- Compact form factor and lightweight design enables easy integration into custom automation rigs, enclosures, and portable laboratory setups
- Brushless motor technology reduces maintenance intervals and extends operational lifespan compared to brushed alternatives
Applications and Use Cases
- Aquaponics and hydroponics nutrient dosing systems where precise daily nutrient delivery to multiple grow beds requires reliable, low-flow peristaltic pumps integrated with Arduino or PLC controllers
- Laboratory automation and analytical chemistry where micro-liter precision fluid transfer is required for reagent dispensing, sample preparation, and automated titration experiments
- Medical device prototyping and drug delivery research where sterile, contamination-free fluid transfer of pharmaceutical compounds and biological samples is non-negotiable
- Industrial process automation for chemical injection, water treatment, and environmental monitoring where corrosive or abrasive fluids would damage traditional pump materials
- Aquarium automation systems for precise medication dosing, auto-feeder integration, and water parameter adjustment in sensitive reef or planted tank environments
How to Use
Begin by inserting the B06 silicone tube into the pump head, ensuring the tube sits properly in the compression chamber with the rotor rollers aligned to compress it evenly. Connect the 24VDC power supply to the pump terminals, ensuring correct polarity to avoid component damage. For manual operation, adjust the speed dial to your desired flow rate; for automated control, connect a PWM signal from your microcontroller or automation system to the speed control input. Prime the tube by running the pump for 10-15 seconds before connecting to your application to remove air pockets and establish consistent flow.
For continuous operation, monitor the silicone tube for signs of wear or degradation, typically visible as cracks or permanent deformation after 6-12 months of heavy use. Replace the tubing by gently removing it from the pump head and inserting fresh B06 tubing, ensuring no debris enters the compression chamber. If using the pump for corrosive liquids, flush the tube with distilled water after each session to prevent salt crystallization or chemical buildup. For applications requiring sterility, use only autoclavable silicone tubing and perform the pump in a clean environment to maintain fluid integrity.
Frequently Asked Questions
Can the Kamoer KPP2 handle thick or viscous fluids?
Yes, the peristaltic pump design is specifically engineered for viscous fluids including oils, glycerin, and thick slurries. The B06 tubing provides adequate compression force to move fluids up to approximately 1000 cP viscosity without stalling. For extremely viscous applications above 1000 cP, flow rates will decrease proportionally, but the pump will continue to operate reliably without damage. Always verify your specific fluid viscosity against the pump's rated compression force before deployment.
What is the maximum backpressure this pump can handle?
The Kamoer KPP2 can typically handle backpressure up to 0.5 bar (7.25 psi) before flow rate degradation becomes significant. Beyond 1 bar, the pump may stall or the tubing may slip within the compression chamber. For applications with high backpressure requirements, consider using a larger bore tubing configuration or a higher-capacity pump model. Always design your system to minimize backpressure through proper tubing diameter selection and valve positioning.
How do I control the flow rate remotely or via automation?
The Kamoer KPP2 accepts a PWM (Pulse Width Modulation) signal on its speed control input, allowing integration with Arduino, Raspberry Pi, or industrial PLC systems. Apply a 0-5V PWM signal where 0V equals zero flow and 5V equals maximum flow rate. For example, a 50% duty cycle PWM signal will produce approximately 50% of the pump's maximum flow rate. Consult the technical datasheet for specific PWM frequency recommendations, typically 1-10 kHz for optimal performance.
Is the silicone tubing food-safe or medical-grade?
Standard B06 tubing supplied with the Kamoer KPP2 is laboratory-grade silicone suitable for most aquaculture and industrial applications. For food-contact or medical applications, verify that the tubing meets FDA CFR 177.2600 or USP Class VI requirements. Contact our support team for sourcing medical-grade or food-safe tubing alternatives, which may require special order and custom configuration.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Kamoer KPP2 – 24VDC In-0.27A – B06 Peristaltic Pump Online in India
Purchase the Kamoer KPP2 – 24VDC In-0.27A – B06 Peristaltic Pump online at The Tech Depot, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Kamoer KPP2 – 24VDC In-0.27A – B06 Peristaltic Pump with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.