Kamoer 12V 3.5A 4000ml/min Liquid Diaphragm Pump
Kamoer 12V 3.5A 4000ml/min Liquid Diaphragm Pump
Kamoer 12V 3.5A 4000ml/min Liquid Diaphragm Pump
The Kamoer 12V 3.5A 4000ml/min Liquid Diaphragm Pump is a compact, electrically-driven positive displacement pump designed for precise fluid transfer in low-pressure applications requiring consistent flow rates up to 4 liters per minute. Professional engineers, laboratory technicians, and automation specialists rely on this pump for dosing, circulation, and transfer tasks in chemical processing, water treatment, medical equipment, and industrial automation systems. This pump solves the critical challenge of delivering accurate, pulsation-controlled liquid movement in applications where traditional centrifugal pumps cannot maintain precision or where self-priming capability is essential.
Product Overview
The Kamoer diaphragm pump operates on the principle of positive displacement using a flexible diaphragm that reciprocates through electromagnetic actuation. Unlike centrifugal pumps that rely on impeller speed, this diaphragm design creates discrete fluid chambers that fill and discharge with each pump cycle, delivering consistent volumetric flow regardless of back-pressure variations up to the pump's rated maximum. The 12V DC power requirement makes it ideal for battery-powered systems, renewable energy applications, and portable equipment, while the 3.5A current draw ensures compatibility with standard industrial power supplies and solar-powered installations.
What distinguishes the Kamoer 4000ml/min model is its engineered balance between flow capacity and operational efficiency. The diaphragm mechanism provides inherent self-priming capability, allowing the pump to draw liquid from sources below the pump inlet without manual priming. The low-pulsation design minimizes vibration transmission to connected piping, reducing noise and extending component lifespan. With typical operating pressures ranging from 0-3 bar, this pump excels in gravity-fed systems, closed-loop circulation, and pressure-sensitive applications where maintaining fluid integrity is paramount.
Key Specifications
| Specification | Details |
| Product Type | 12V DC Electric Diaphragm Pump |
| Brand | Kamoer |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
| Operating Voltage | 12V DC |
| Current Draw | 3.5A maximum |
| Maximum Flow Rate | 4000ml/min (4 liters/minute) |
| Maximum Pressure | 3 bar (43.5 psi) |
| Pump Type | Positive Displacement Diaphragm |
| Inlet/Outlet Port Size | 1/4 inch NPT or barbed connectors |
Key Features
- Self-Priming Capability: Diaphragm design eliminates need for manual priming, enabling operation with inlet sources below pump centerline for maximum installation flexibility
- Low Pulsation Output: Engineered diaphragm stroke delivers smooth, consistent flow with minimal pressure ripple, protecting sensitive equipment and reducing noise to under 75dB
- Compact Form Factor: Lightweight design (typically under 1.5kg) enables portable deployment and integration into space-constrained automation systems and mobile applications
- Dry-Run Capability: Pump can operate without fluid for extended periods without damage, making it ideal for standby systems and intermittent-duty applications
- Chemical Compatibility: Diaphragm and wetted materials resist common solvents, oils, and mild acids, broadening application range across pharmaceutical, agricultural, and industrial sectors
- Low Power Consumption: 3.5A draw at 12V enables operation from standard automotive batteries, 48V solar arrays, or industrial DC supplies without specialized power infrastructure
Applications and Use Cases
- Aquarium and Hydroponics Systems: Precise nutrient dosing and water circulation in controlled-environment agriculture where flow accuracy directly impacts crop yield and plant health
- Laboratory Fluid Dispensing: Accurate chemical reagent transfer in analytical instruments, medical diagnostic equipment, and research automation where repeatability and contamination control are critical
- RV and Marine Water Systems: Fresh water circulation, waste water transfer, and bilge pumping in mobile platforms where reliability, compact size, and low power draw are essential constraints
- Industrial Process Automation: Coolant circulation in CNC machines, adhesive dispensing in manufacturing lines, and ink transfer in printing systems requiring consistent flow under variable back-pressure
- Medical Equipment: Peristaltic-alternative fluid delivery in dialysis machines, infusion pumps, and laboratory analyzers where sterile, pulsation-controlled flow prevents hemolysis and maintains sample integrity
- Renewable Energy Systems: Water circulation in solar thermal collectors and battery cooling loops where DC power integration and efficiency optimization reduce parasitic losses
How to Use
Installation begins with verifying inlet and outlet port compatibility with your tubing diameter. Connect the inlet port to your liquid source using barbed fittings or NPT adapters, ensuring the source is positioned above the pump inlet to leverage gravity-assist priming on initial startup. Connect the outlet port to your destination reservoir or system. Secure all connections with hose clamps rated for your operating pressure to prevent leakage under the pump's 3 bar maximum pressure. Before electrical connection, verify that all fluid pathways are clear of blockages and that the pump chamber is filled with the intended liquid to optimize initial priming.
For electrical connection, wire the positive terminal to your 12V DC power supply positive rail and the negative terminal to ground, ensuring polarity is correct to prevent motor damage. The pump will begin operation immediately upon power application. Monitor initial operation for 2-3 minutes to confirm steady flow and identify any air pockets in the lines. If flow is weak or intermittent during startup, the pump is likely air-locked; close the outlet valve temporarily to build back-pressure, which forces air out through the inlet. For continuous operation, ensure ambient temperature remains between 0-40 degrees Celsius and that the pump intake never runs dry, as this accelerates diaphragm wear. Perform monthly visual inspections of all connections and replace any cracked or hardened tubing immediately to prevent system failure.
Frequently Asked Questions
Can the Kamoer pump handle viscous fluids like oils and glycerin?
Yes, the diaphragm pump design is well-suited for viscous fluids up to approximately 500 centipoise. However, higher viscosity reduces flow rate proportionally and increases current draw. For fluids above 500cP, consult Kamoer technical specifications for your specific fluid, as excessive viscosity may cause incomplete diaphragm cycling and reduced pump life. Always verify chemical compatibility of the diaphragm material with your intended fluid.
What is the maximum suction lift capability of this pump?
The Kamoer diaphragm pump can achieve self-priming lift of up to 1.5-2 meters under ideal conditions with water at sea level. Actual suction lift depends on fluid viscosity, ambient temperature, and atmospheric pressure. At higher altitudes or with viscous fluids, maximum suction lift decreases. For applications requiring suction from depths exceeding 1.5 meters, position the pump inlet below the liquid level or use a foot valve with check mechanism to maintain prime.
Is this pump suitable for battery-powered portable systems?
Absolutely. The 12V DC 3.5A specification makes this pump ideal for battery applications. A standard 100Ah lithium or lead-acid battery can power continuous operation for 28+ hours. For solar-powered systems, pair with a 200W solar panel and MPPT charge controller. The pump's dry-run tolerance means it can operate intermittently without damage, making it perfect for demand-activated portable water systems in RVs, boats, and remote installations.
What maintenance is required for long-term reliability?
Monthly maintenance includes visual inspection of all hose connections and fittings for cracks or leakage, and verification that inlet and outlet lines are clear of blockages. Every 6 months, flush the pump with clean water to remove any sediment or mineral deposits that may accumulate. If the pump will be idle for more than 30 days, drain all fluid from the system to prevent diaphragm hardening and seal degradation. Replace the diaphragm assembly every 2-3 years or if flow rate drops below 80 percent of rated capacity, indicating seal wear.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Kamoer 12V 3.5A 4000ml/min Liquid Diaphragm Pump Online in India
Purchase the Kamoer 12V 3.5A 4000ml/min Liquid Diaphragm Pump online at The Tech Depot, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Kamoer 12V 3.5A 4000ml/min Liquid Diaphragm Pump with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.