JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Black Box 2-6S LIPO F411 Flight Controller acro
JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Black Box 2-6S LIPO F411 Flight Controller acro
JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Black Box 2-6S LIPO F411 Flight Controller acro
The JHEMCU F4 NOXE V3 is a professional-grade flight controller designed for FPV racing drones and acro quadcopters, featuring an STM32F411 processor with integrated OSD, barometer, and dual BEC outputs for stable power distribution across 2-6S LiPo batteries. This advanced controller is widely used by competitive FPV pilots, drone racing teams, and professional aerial cinematography operators who demand precise gyroscopic stabilization and real-time flight telemetry. The integrated black box flight recorder solves critical issues in drone debugging, crash analysis, and performance optimization by capturing detailed flight logs at high frequency rates.
Product Overview
The JHEMCU F4 NOXE V3 represents the pinnacle of flight controller engineering for acro and racing applications. Built around the STM32F411 32-bit ARM Cortex-M4 processor running at 100MHz, this controller delivers exceptional computational power for advanced flight algorithms and real-time sensor fusion. The dual BEC system provides independent 5V and 10V regulated outputs, enabling simultaneous powering of video transmitters, camera systems, and receiver modules without voltage sag or interference. The integrated barometer enables altitude hold and autonomous flight modes, while the on-screen display processor overlays critical flight data directly onto FPV video feeds with zero latency impact.
What distinguishes the NOXE V3 is its comprehensive integrated ecosystem: the black box flight recorder captures gyroscope, accelerometer, and magnetometer data at 32kHz sampling rates, creating detailed flight logs essential for tuning PID parameters and analyzing crash dynamics. The OSD engine processes telemetry from multiple sensors and displays voltage, current draw, GPS coordinates, flight time, and custom user data on video output. Support for 2-6S LiPo configurations with automatic voltage detection provides flexibility across different drone builds, while the compact 36x36mm form factor fits seamlessly into tight airframe designs without compromising performance or reliability.
Key Specifications
| Specification | Details |
| Product Type | Flight Controller with Integrated OSD and Black Box |
| Brand | JHEMCU |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
| Processor | STM32F411 32-bit ARM Cortex-M4 at 100MHz |
| BEC Output | Dual BEC: 5V 2A and 10V 2A regulated outputs |
| Battery Support | 2-6S LiPo with automatic voltage detection |
| Sensors | 6-axis IMU, Barometer, Magnetometer |
| Black Box Recording | 32kHz gyroscope and accelerometer logging |
| OSD Resolution | 1080p video passthrough with overlay capability |
Key Features
- Dual BEC Architecture: Independent 5V 2A and 10V 2A outputs eliminate voltage conflicts and enable simultaneous powering of VTX, camera, and receiver modules without performance degradation
- Integrated Black Box Flight Recorder: Captures gyroscope, accelerometer, and barometer data at 32kHz frequency for comprehensive crash analysis and PID tuning optimization
- On-Screen Display Processor: Real-time telemetry overlay on FPV video feed including voltage monitoring, current draw, flight timer, and custom user data with zero latency
- Barometer Integration: Altitude sensing enables altitude hold mode, terrain following, and autonomous mission planning capabilities for advanced flight operations
- Wide Battery Range: Supports 2-6S LiPo configurations with automatic voltage detection and protection against over-discharge and over-voltage conditions
- Compact 36x36mm Form Factor: Lightweight design weighing under 10 grams fits ultra-tight airframes while maintaining full feature set and processing power
Applications and Use Cases
- FPV Racing Drones: Competitive racing pilots utilize the NOXE V3 for its low-latency OSD and precise gyroscopic response, enabling sub-millisecond control feedback essential for gate racing and obstacle navigation
- Acro Freestyle Flying: Professional freestyle pilots leverage the black box recorder to analyze complex maneuvers, optimize PID tuning, and perfect inverted flight and tumbling techniques
- Aerial Cinematography: Commercial drone operators employ the barometer and dual BEC outputs to power cinema-grade cameras and stabilized gimbals while maintaining reliable power distribution across extended flight missions
- Drone Racing Team Development: Racing teams use integrated flight logs to compare pilot performance, analyze equipment failures, and develop standardized tuning profiles across fleet aircraft
- Research and Development: Aerospace engineers utilize the high-frequency sensor data logging for control system modeling, aerodynamic testing, and algorithm validation on experimental platforms
How to Use
Installation begins with careful orientation of the flight controller in your airframe, ensuring the arrow marking points toward the drone's forward direction. Connect the battery connector to your LiPo pack, then establish communication via USB to your configuration software such as Betaflight or iNav. The dual BEC outputs must be configured based on your power requirements: use the 5V output for standard receivers and light modules, and the 10V output for high-power video transmitters or auxiliary devices. Ensure proper voltage ratings for all connected peripherals to prevent damage from over-voltage conditions.
Configure the OSD parameters through your flight control software to display desired telemetry fields, then connect the video input and output connectors to your camera and video transmitter respectively. The black box recorder automatically begins logging when armed, so verify sufficient SD card space or internal storage capacity before extended flight sessions. Calibrate the barometer by placing the drone on a level surface and allowing 5-10 seconds for sensor stabilization. Before first flight, perform a full compass calibration in an area free from magnetic interference, then conduct a test hover to verify sensor responsiveness and OSD overlay functionality.
Frequently Asked Questions
What is the maximum current rating for the dual BEC outputs on the NOXE V3?
The JHEMCU F4 NOXE V3 features dual BEC outputs rated at 2 amperes each: the 5V output delivers up to 2A for receivers and light modules, while the 10V output provides 2A for high-power video transmitters and auxiliary equipment. Total combined current draw should not exceed 4A to prevent thermal shutdown. For applications requiring higher current, external power distribution boards are recommended.
How does the integrated black box flight recorder improve PID tuning?
The black box records gyroscope and accelerometer data at 32kHz sampling frequency, capturing detailed response characteristics during flight maneuvers. By analyzing these logs in tools like Blackbox Explorer, pilots can visualize PID loop behavior, identify oscillations or lag, and make precise adjustments to P, I, and D gains. This data-driven approach eliminates guesswork and accelerates the tuning process significantly compared to trial-and-error methods.
Can the NOXE V3 support 6S LiPo batteries safely?
Yes, the NOXE V3 is fully rated for 2-6S LiPo operation with automatic voltage detection and protection circuitry. The 10V BEC output is specifically designed for 6S battery packs, providing regulated power to high-voltage peripherals. However, verify that all connected devices are rated for their respective voltages. The flight controller includes over-voltage and under-voltage protection to prevent damage from battery faults.
What video formats does the OSD processor support?
The integrated OSD processor supports standard analog video formats including NTSC and PAL, with video passthrough up to 1080p resolution. The overlay capability works with any analog video source from FPV cameras, allowing real-time telemetry display without requiring digital video processing. The OSD operates independently of the flight control system, ensuring telemetry display continues even if the main processor experiences issues.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Black Box 2-6S LIPO F411 Flight Controller acro Online in India
Purchase the JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Black Box 2-6S LIPO F411 Flight Controller acro online at The Tech Depot, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Black Box 2-6S LIPO F411 Flight Controller acro with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.