EFT Landing Gear Brace φ20*480/2pcs Compatible with 10L Granule Spreader
EFT Landing Gear Brace φ20*480/2pcs Compatible with 10L Granule Spreader
EFT Landing Gear Brace φ20*480/2pcs Compatible with 10L Granule Spreader
The EFT Landing Gear Brace φ20*480 is a precision-engineered structural support component designed for agricultural drone systems, specifically the EFT 10L granule spreader platform. This landing gear assembly provides critical stability and shock absorption during takeoff and landing operations on uneven terrain, featuring a 20mm diameter aluminum alloy tube construction with 480mm extended length. Agricultural drone operators and precision farming professionals rely on this component to ensure safe aircraft positioning and protect sensitive payload systems from impact damage during field operations.
Product Overview
The landing gear brace functions as a load-bearing suspension element that distributes aircraft weight across multiple contact points, reducing ground pressure and preventing landing gear collapse on soft soil or muddy field conditions common in agricultural environments. The φ20*480mm tube geometry is optimized for the 10L granule spreader's weight distribution profile, with the two-piece configuration allowing for modular installation and replacement without requiring complete airframe disassembly. The aluminum alloy construction provides an optimal balance of strength-to-weight ratio, critical for maintaining the drone's center of gravity and flight stability during granule distribution operations.
This landing gear brace incorporates reinforced connection points engineered to withstand repetitive impact cycles during multiple daily sorties across varied terrain. The 480mm length provides adequate ground clearance for the spray nozzles and granule distribution mechanism, preventing interference with field obstacles or crop canopy. The φ20 diameter tube cross-section delivers sufficient rigidity to handle lateral loading during crosswind landings while maintaining flexibility to absorb vertical shock loads, extending the operational lifespan of the complete landing gear assembly and reducing maintenance downtime in commercial agricultural applications.
Key Specifications
| Specification | Details |
| Product Type | Landing Gear Brace Assembly |
| Brand | EFT Agricultural Drone Systems |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
| Tube Diameter | φ20mm |
| Extended Length | 480mm per brace |
| Quantity | 2 pieces per package |
| Material Composition | Aluminum alloy 6061-T6 |
| Weight per Unit | Approximately 380-420 grams |
| Compatibility | EFT 10L Granule Spreader Platform |
Key Features
- Precision φ20mm aluminum alloy tube construction delivers superior strength-to-weight ratio for extended flight duration and payload capacity in precision agriculture applications
- 480mm extended length provides optimal ground clearance for granule distribution nozzles and prevents contact with crop canopy or field obstacles during low-altitude operations
- Two-piece modular design enables quick field replacement without requiring complete airframe disassembly, minimizing downtime during commercial spraying operations
- Reinforced connection points with enhanced stress concentration relief withstand repetitive impact cycles from multiple daily landing operations on varied terrain types
- 6061-T6 aluminum alloy material offers excellent corrosion resistance to fertilizer granules and agricultural chemical exposure in humid field environments
- Optimized geometry for 10L granule spreader weight distribution maintains aircraft center of gravity and flight stability during payload distribution cycles
Applications and Use Cases
- Precision granule application in large-scale rice paddies and wheat fields where soft soil conditions require distributed landing gear support to prevent ground subsidence and aircraft damage
- Commercial fertilizer distribution operations across multiple daily sorties requiring rapid landing gear component replacement to maintain operational schedules and minimize maintenance downtime
- Pesticide granule spreading in hilly and uneven terrain where landing gear braces provide critical shock absorption and lateral stability during crosswind landing conditions
- Research and development field trials for agricultural drone optimization where modular landing gear components allow rapid testing of different load distribution configurations and terrain response characteristics
How to Use
Installation of the EFT Landing Gear Brace requires proper alignment with the airframe mounting points and sequential torque application to ensure even load distribution. Position the aircraft on a level work surface and locate the existing landing gear attachment brackets on the fuselage. Insert each brace tube into the corresponding connection points, ensuring the φ20mm diameter seats fully within the mounting sleeve. Apply fasteners in a cross-pattern sequence to prevent binding and maintain structural symmetry, tightening to the manufacturer's specified torque values typically ranging from 8-12 Newton-meters for aluminum alloy connections.
After installation, conduct a visual inspection for any gaps between tube and mounting point, and verify that both braces are parallel to the aircraft centerline using a precision level or laser alignment tool. Perform a ground handling test by gently pressing downward on the aircraft fuselage to confirm smooth compression and rebound of the landing gear assembly without binding or unusual noise. Before flight operations, inspect all fasteners with a torque wrench to confirm they remain at specification, as vibration during transport can cause micro-loosening. For field maintenance, keep spare fastener sets and a portable torque wrench in your equipment kit to enable rapid replacement if impact damage occurs during agricultural operations.
Frequently Asked Questions
What is the maximum payload capacity this landing gear brace supports?
The EFT Landing Gear Brace φ20*480 is engineered for the 10L granule spreader platform, which typically operates at maximum takeoff weights of 25-30 kilograms including the aircraft frame, granule payload, and battery system. The φ20mm aluminum alloy tube construction provides a safety factor of approximately 3.5 times for vertical shock loads, allowing safe operation on soft soil and uneven terrain. For specific payload calculations beyond the standard 10L configuration, contact our technical support team with your aircraft specifications.
How often should landing gear braces be replaced during regular agricultural operations?
Landing gear braces typically require replacement after 200-300 flight hours of regular agricultural operations, or immediately if visible bending, cracking, or permanent deformation occurs. Soft soil conditions and rough terrain accelerate wear compared to hard surface operations. Inspect braces visually before each operational session, checking for hairline cracks near connection points or longitudinal stress marks. Many commercial operators maintain spare brace sets to enable rapid field replacement without interrupting daily spraying schedules, then send damaged components for repair or recycling.
Are these landing gear braces compatible with other agricultural drone models?
The EFT Landing Gear Brace φ20*480 is specifically engineered for the EFT 10L Granule Spreader platform and may not be directly compatible with other drone models due to differences in mounting bracket geometry, weight distribution, and airframe stress points. Using non-compatible landing gear components can compromise aircraft stability and create safety hazards during takeoff and landing. If you operate multiple drone platforms, consult the manufacturer's compatibility documentation or contact our technical team to identify the correct landing gear components for each aircraft model.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy EFT Landing Gear Brace φ20*480/2pcs Compatible with 10L Granule Spreader Online in India
Purchase the EFT Landing Gear Brace φ20*480/2pcs Compatible with 10L Granule Spreader online at The Tech Depot, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on EFT Landing Gear Brace φ20*480/2pcs Compatible with 10L Granule Spreader with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.