The NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi adds cellular IoT connectivity and satellite positioning to a Raspberry Pi in a single add-on board, and it is listed at Tech Depot India for Rs 4,558. Specify the NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi where a design calls for low-power wide-area connectivity plus location data on the same board.
What is the NB-IoT / Cat-M(eMTC) / GNSS HAT?
This is a Raspberry Pi HAT (Hardware Attached on Top) built around three connectivity standards named directly in the product: NB-IoT and Cat-M(eMTC), which are low-power cellular protocols designed for IoT deployments, and GNSS, for satellite-based positioning. Combined on one board, they let a Pi-based device connect to a cellular network and determine its own location without a separate modem or GPS module.
As a HAT, it is designed to mount directly onto the Raspberry Pi's GPIO header, integrating with the board's standard form factor rather than requiring external wiring for the core connection. Engineers evaluating it for a deployment should review the complete listing for the NB-IoT / Cat-M / GNSS HAT against their own network and antenna requirements.
NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi projects — what you can build
- Remote environmental or agricultural sensor nodes reporting over a cellular IoT network
- Asset-tracking devices that combine cellular connectivity with GNSS location data
- Utility or infrastructure monitoring units deployed outside Wi-Fi coverage
- Fleet or equipment trackers needing both positioning and low-power data reporting
- Field-deployed data loggers that need periodic uplinks without a local network
- Prototype IoT products validating NB-IoT or Cat-M connectivity before a custom PCB
Raspberry Pi HAT options compared
| Product | Price | Notes |
|---|---|---|
| NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi | Rs 4,558 | Cellular IoT and GNSS positioning HAT for the Raspberry Pi |
| 2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi | Rs 4,542 | Two-channel isolated CAN FD interface HAT for the Raspberry Pi |
| 2.4inch Raspberry Pi Display Hat - 4D Systems | Rs 4,699 | 2.4-inch display HAT from 4D Systems for the Raspberry Pi |
| 7.5-inch E-Ink Paper display HAT for Raspberry Pi | Rs 7,087 | 7.5-inch e-ink paper display HAT for the Raspberry Pi |
Choosing the right connectivity HAT for your deployment
Selection here should be driven by the network and positioning requirements of the deployment rather than by board price alone. The NB-IoT / Cat-M(eMTC) / GNSS HAT is the appropriate choice when a project needs cellular-based uplink combined with location data from a single board, such as an asset tracker operating outside fixed network coverage. Where the requirement is instead a wired industrial bus, a display, or a low-power always-on readout, the CAN FD, LCD, or e-ink HATs listed above are a better match. Confirm carrier support for NB-IoT and Cat-M(eMTC) in the target deployment region, and check antenna and SIM requirements on the product page, before committing a design to this board.
NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi specifications
For full and current specifications — supported bands, module part numbers, GNSS constellations and interface details — check the product page before finalizing a design.
Buy NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi Online in India
Tech Depot India ships this HAT to Bengaluru, Delhi NCR, Hyderabad, Mumbai, Chennai and pan-India, with a GST invoice issued on every order. Payment is prepaid only, processed through Razorpay via UPI, cards or net-banking, and delivery takes 8-10 working days. Engineers researching the NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi Price in India for a project bill of materials will find it listed clearly here, and it is regularly treated as the best NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi option where cellular and GNSS need to share one board. Every order is covered by a 15-day warranty on manufacturing defects, provided the issue is reported within 5 days of delivery. For procurement or technical questions ahead of an order, contact us on WhatsApp or email techdepotindia@gmail.com, or review the full single-board computer accessories collection.
Frequently asked questions
What is the NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi Price in India?
It is priced at Rs 4,558 at Tech Depot India, with a GST invoice issued on every order.
How long does delivery take?
Orders are dispatched from Bengaluru, Delhi NCR or Hyderabad and typically reach you pan-India within 8-10 working days.
Is there a warranty on this HAT?
Yes — a 15-day warranty on manufacturing defects applies, provided the issue is reported within 5 days of delivery.
What are the payment and invoicing terms?
Orders are prepaid only, via Razorpay (UPI, cards or net-banking), and a GST invoice is generated for every order.
Will this HAT work with my Raspberry Pi board and my cellular network?
Check the product page for supported Raspberry Pi models and network bands, and confirm NB-IoT/Cat-M(eMTC) coverage with your carrier and your board's documentation before ordering.