SmartElex Micro:Bit L298N Motor Driver

Name: SmartElex Micro:Bit L298N Motor Driver
Brand: The Tech Depot
SKU: TTD-6078
Price: 943.29 INR
Availability: InStock

Rs. 943.29

TTD-6078

🚚 Pan-India delivery

In stock

Shipping calculated at checkout.

Check availability on WhatsApp Confirm live stock and delivery time for your pincode before ordering.

Our team in Bengaluru is available reliable to support your journey from product selection to project completion.

The SmartElex Micro:Bit L298N Motor Driver is a dual H-bridge motor control module designed to interface DC motors and stepper motors with microcontroller platforms including BBC Micro:Bit, Arduino, and Raspberry Pi. Professional roboticists, embedded systems engineers, and educational institutions rely on this module to achieve precise bidirectional motor control with PWM speed regulation and current limiting capabilities. This driver solves the critical problem of safely controlling high-current motors from low-current microcontroller GPIO pins while providing protection against back-EMF and load transients.

Specifications

Specification	Details
Product Type	Dual H-Bridge DC Motor Driver Module
Brand	SmartElex
Origin	Original/Authentic
Motor Control Channels	2 independent channels for dual DC motors or 1 stepper motor
Maximum Current per Channel	2A continuous, 3A peak
Motor Supply Voltage	5V to 35V DC
Logic Supply Voltage	5V (onboard regulator)
Control Interface	PWM speed control, direction control pins, compatible with Micro:Bit, Arduino, Raspberry Pi
Output Protection	Integrated freewheeling diodes, thermal shutdown protection

Why Choose SmartElex Micro:Bit L298N Motor Driver?

100% Authentic

GST Invoice - A GST invoice is included with every order.

Expert Support - Dedicated technical help on WhatsApp and email.

Pan-India Delivery - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.

Trusted by Makers - Used by students, hobbyists and professionals nationwide.

Key Features of SmartElex Micro:Bit L298N Motor Driver

Dual H-Bridge Configuration: Independent control of two 2A DC motors simultaneously, enabling differential drive robotics platforms with separate speed and direction management for each motor
Micro:Bit Optimized Design: Pre-configured pin headers and connector layout for direct Micro:Bit compatibility, eliminating breadboard wiring and reducing assembly time for educational projects
PWM Speed Control: Accepts 5V PWM signals from microcontroller pins to achieve smooth speed modulation from 0-100% without stepping or jitter
Integrated Protection Circuitry: Onboard freewheeling diodes protect against back-EMF spikes, thermal shutdown protection prevents IC damage from overcurrent conditions
Wide Voltage Range: Supports motor supply voltages from 5V to 35V, accommodating everything from small hobby motors to larger industrial DC motors
Status Indicators: Power LED and motor direction LEDs provide real-time visual feedback of driver operation and motor status

Perfect For

Educational Robotics Platforms: Drive wheeled robots, line-following robots, and obstacle-avoiding robots in STEM curricula using Micro:Bit programming environments with visual block-based code
Autonomous Mobile Robots: Control differential drive systems in research robotics projects requiring precise motor synchronization and PWM-based speed matching between left and right drive motors
Micro:Bit Expansion Projects: Power motorized mechanisms including robotic arms, conveyor belts, and automated systems interfaced through Micro:Bit GPIO pins
Stepper Motor Control: Drive NEMA 17 and smaller stepper motors through microstepping sequences, enabling precise positioning in 3D printer prototypes and CNC applications
Industrial Automation Prototyping: Control DC motors in factory automation mock-ups, conveyor systems, and automated material handling demonstrations

How to Use

Begin by connecting your motor power supply to the +12V and GND terminals on the module, ensuring polarity is correct to avoid component damage. Connect your two DC motors to the OUT1-OUT2 and OUT3-OUT4 terminal pairs, observing that motor direction is determined by the polarity of these connections. Connect the IN1, IN2, IN3, and IN4 control pins to your Micro:Bit GPIO pins or Arduino digital pins, along with a common GND connection. For PWM speed control, connect the PWM signal to the appropriate IN pins while using the other IN pin as a direction control line, or use both IN pins for PWM to achieve variable speed in both directions.

In your Micro:Bit MicroPython code, configure the GPIO pins as digital outputs and set them HIGH or LOW to control motor direction. To vary motor speed, use PWM by setting the pin frequency to 1000Hz and adjusting the duty cycle from 0 to 1023. For example, setting pin P0 to PWM with duty cycle 512 will run the motor at approximately 50% speed. Always test with a low-voltage motor first (5V DC motor) before connecting higher-voltage motors. Monitor the temperature of the L298N IC during operation; if it becomes too hot, add a small heatsink or reduce the continuous current load. For stepper motor control, implement the appropriate stepping sequence in software, typically using a 4-step or 8-step pattern depending on your stepper motor specifications.

Product Overview

The L298N motor driver operates on the principle of an integrated dual H-bridge circuit, allowing independent control of two DC motors or one stepper motor with full directional and speed control. The module uses the ST Microelectronics L298N IC, which features two separate H-bridge circuits capable of driving motors with currents up to 2A per channel and peak currents up to 3A. The driver accepts PWM signals from microcontrollers to modulate motor speed through pulse-width modulation, while separate direction control pins determine motor rotation direction. On-board 5V voltage regulation and status LEDs provide visual feedback of motor operation and power status, making it ideal for rapid prototyping and educational applications.

What distinguishes the SmartElex variant is its optimized PCB layout for Micro:Bit compatibility, featuring clearly labeled pin headers that align directly with Micro:Bit expansion connectors, reducing wiring complexity and potential connection errors. The module includes built-in freewheeling diodes for each output channel, protecting the L298N IC from reverse voltage spikes generated during motor deceleration. The 5V onboard regulator eliminates the need for separate power supplies for logic circuits, while the motor power supply remains independent, allowing operation with voltages from 5V to 35V depending on motor requirements. This design ensures reliable operation across diverse motor specifications commonly encountered in robotics projects and industrial automation applications.

Frequently Asked Questions

Can the L298N motor driver control stepper motors with the Micro:Bit?

Yes, the L298N can drive NEMA 17 and smaller stepper motors by implementing stepper control sequences in Micro:Bit code. You would use four GPIO pins to control the four coils of the stepper motor in the correct sequence. For NEMA 23 or larger steppers requiring higher current, you would need a dedicated stepper driver module instead. The module supports both full-step and half-step sequences depending on your positioning accuracy requirements.

What is the maximum motor voltage this driver can handle safely?

The L298N IC is rated for motor supply voltages up to 46V absolute maximum, but the SmartElex module is designed and tested for safe operation up to 35V DC. Operating above 35V risks exceeding the voltage rating of the onboard capacitors and protection diodes. For motors requiring higher voltages, consider using a dedicated high-voltage motor driver module. Always verify your motor's rated voltage before connecting to avoid damage.

How do I control motor speed smoothly without steps or stuttering?

Use PWM (Pulse Width Modulation) at a frequency of 1000Hz or higher for smooth speed control. In Micro:Bit MicroPython, use the pin.write_analog() function with values from 0 to 1023 to vary the duty cycle. Lower PWM frequencies below 500Hz may cause audible buzzing or jerky motor movement. For optimal performance, set your PWM frequency to 1000-5000Hz depending on your motor's inertia and load characteristics.

Can I power the module and motors from the same battery?

Yes, you can use a single power supply for both the module and motors if the supply voltage is within the 5V-35V range. However, for better performance and to prevent voltage sag affecting your Micro:Bit logic circuits, use a power supply rated for at least 2A per motor channel. If your motors draw high peak currents, use a dedicated battery for the motors and a separate regulated 5V supply for the Micro:Bit to maintain stable logic voltage.

When will I receive my order?

Are bulk discounts available?

Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.