Orange 300PCS High Voltage Ceramic Capacitor Kit
Orange 300PCS High Voltage Ceramic Capacitor Kit
Orange 300PCS High Voltage Ceramic Capacitor Kit
The Orange 300PCS High Voltage Ceramic Capacitor Kit is a comprehensive assortment of multilayer ceramic capacitors (MLCCs) specifically designed for high-voltage applications up to 2000V, making it essential for power supply circuits, switching regulators, and high-frequency filtering applications. Electronics engineers, PCB designers, and industrial technicians rely on this kit to prototype and repair circuits requiring stable capacitance across wide temperature ranges and frequency spectra. This kit eliminates the need for purchasing individual capacitor values, solving the common problem of component sourcing delays and reducing project development time while ensuring consistent quality across all capacitance values.
Product Overview
High-voltage ceramic capacitors operate on the principle of dielectric polarization, where an electric field applied across a ceramic material causes charge separation, storing electrical energy efficiently. The Orange kit contains 300 pieces distributed across multiple capacitance values (typically ranging from 1nF to 100µF) and voltage ratings, with each capacitor manufactured using advanced ceramic dielectric technology. These capacitors exhibit excellent temperature stability with typical temperature coefficients of ±10% to ±20% across the -40°C to +125°C operating range, making them suitable for demanding industrial and consumer electronics applications where reliability is non-negotiable.
What distinguishes this kit is the carefully curated selection of the most commonly used capacitance values in modern electronics design, eliminating redundant components while maximizing practical utility. The ceramic construction provides superior frequency response characteristics with minimal parasitic inductance, enabling effective filtering up to several MHz. Each capacitor undergoes rigorous quality testing to ensure breakdown voltage ratings are met, with typical dissipation factors below 5% at 1kHz, guaranteeing consistent performance in both DC blocking and AC coupling applications across diverse circuit topologies.
Key Specifications
| Specification | Details |
| Product Type | High Voltage Ceramic Capacitor Assortment Kit |
| Brand | Orange |
| Total Pieces | 300 PCS |
| Voltage Rating | Up to 2000V DC |
| Capacitance Range | 1nF to 100µF (Multiple values) |
| Dielectric Material | Multilayer Ceramic (MLCC) |
| Temperature Range | -40°C to +125°C |
| Tolerance | ±10% to ±20% |
| Dissipation Factor | Less than 5% at 1kHz |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- High Voltage Rating up to 2000V ensures safe operation in power conversion circuits, switching power supplies, and high-voltage DC bus applications without risk of dielectric breakdown
- 300 Assorted Values covering the complete spectrum of practical capacitance requirements from nanofarad to microfarad range, eliminating multiple purchases and reducing component inventory management overhead
- Multilayer Ceramic Construction (MLCC) provides superior frequency response characteristics with minimal equivalent series resistance (ESR), enabling effective noise filtering and high-frequency decoupling in switching circuits
- Wide Operating Temperature Range from -40°C to +125°C with stable capacitance characteristics ensures reliable performance across industrial, automotive, and consumer electronics environments
- Compact Form Factor with standard lead spacing enables easy integration into breadboards, PCB prototyping, and legacy circuit repairs without requiring specialized mounting techniques
- Cost-Effective Bulk Kit pricing delivers significant savings compared to purchasing individual capacitor values, making it ideal for educational institutions, design labs, and production facilities
Applications and Use Cases
- Power Supply Design and Repair where high-voltage filtering capacitors are required for rectification circuits, smoothing ripple voltage, and protecting downstream components from transient spikes in AC-to-DC conversion stages
- Switching Power Supply (SMPS) Circuits requiring high-frequency decoupling capacitors across multiple voltage rails to suppress electromagnetic interference (EMI) and maintain stable output voltage regulation
- High-Voltage DC Bus Applications in industrial automation, renewable energy inverters, and electric vehicle charging systems where capacitors must withstand sustained voltage stress and rapid charge-discharge cycles
- PCB Prototyping and Educational Electronics Projects where engineers and students need access to diverse capacitor values for circuit experimentation, troubleshooting, and design validation without component sourcing delays
- Legacy Equipment Repair and Maintenance where original high-voltage ceramic capacitors have degraded, requiring quick replacement with compatible components to restore equipment functionality
- RF and Microwave Circuit Design where ceramic capacitors provide excellent high-frequency characteristics for impedance matching, coupling, and tuning applications in communication systems
How to Use
Before incorporating capacitors from this kit into your circuit design, verify the required capacitance value and voltage rating specifications from your schematic. Identify the appropriate capacitor from the kit's assortment and inspect the component for physical damage, cracks, or contamination. When soldering ceramic capacitors onto PCBs, maintain soldering iron temperatures below 350°C and limit exposure time to 3-5 seconds to prevent thermal stress on the ceramic dielectric material. For breadboard prototyping, insert the capacitor leads firmly into the breadboard holes, ensuring proper contact while avoiding excessive mechanical stress that could crack the ceramic body.
In high-voltage applications, always observe proper polarity if using polarized capacitors and maintain adequate spacing between capacitor leads and adjacent components to prevent arcing or corona discharge. When using these capacitors in power supply circuits, place them as close as possible to the power pins of integrated circuits to minimize lead inductance and maximize filtering effectiveness at high frequencies. For AC coupling or blocking applications, ensure the voltage rating exceeds the peak voltage of the AC signal plus any DC offset present in the circuit. Always verify capacitor orientation and voltage rating before power-up, and consider using a current-limiting resistor in series during initial power-on to protect against potential capacitor failure in case of design errors.
Frequently Asked Questions
What is the difference between ceramic and electrolytic capacitors, and when should I use this ceramic kit?
Ceramic capacitors offer superior high-frequency response, lower equivalent series resistance (ESR), and excellent stability across temperature ranges, making them ideal for high-voltage applications, RF circuits, and switching power supplies. Electrolytic capacitors provide higher capacitance values in smaller packages but exhibit higher ESR and frequency-dependent impedance characteristics. Use this ceramic kit for decoupling, filtering, and coupling applications in high-voltage circuits; use electrolytic capacitors for bulk energy storage in low-frequency power supply applications.
Can I use these high-voltage capacitors in lower-voltage circuits?
Yes, absolutely. High-voltage rated capacitors can be safely used in lower-voltage applications without any performance degradation. A 2000V-rated capacitor will function perfectly in a 12V circuit. However, using lower-voltage capacitors in higher-voltage applications will result in dielectric breakdown and catastrophic failure. Always select capacitors with voltage ratings equal to or greater than the maximum voltage present in your circuit.
How do I identify the capacitance value and voltage rating from the markings on the capacitor?
Ceramic capacitors use standardized marking codes where numbers indicate capacitance in picofarads. For example, 104 means 10 followed by 4 zeros equals 100,000pF or 100nF. The voltage rating is typically printed separately on the component body. Refer to the kit's documentation or use a digital multimeter with capacitance measurement function to verify unmarked or unclear components. Some kits include a reference chart showing all capacitance values and their corresponding markings.
Are these capacitors suitable for automotive and industrial applications?
Yes, high-voltage ceramic capacitors from this kit are specifically designed for demanding automotive and industrial environments. They maintain stable performance across the extended temperature range of -40°C to +125°C, withstand vibration and mechanical stress, and offer reliable operation in harsh electromagnetic environments. However, verify that the specific application meets all automotive (AEC-Q200) or industrial standards required for your project before deployment in critical systems.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Orange 300PCS High Voltage Ceramic Capacitor Kit Online in India
Purchase the Orange 300PCS High Voltage Ceramic Capacitor Kit online at The Tech Depot, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on Orange 300PCS High Voltage Ceramic Capacitor Kit with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.