M5 Stack Goplus2 DC Motor and Servo Driver Module (STM32F0)
M5 Stack Goplus2 DC Motor and Servo Driver Module (STM32F0)
Shipping calculated at checkout.
Our team in Bengaluru is available reliable to support your journey from product selection to project completion.
M5 Stack Goplus2 DC Motor and Servo Driver Module (STM32F0) is a Microcontroller available online in India from Tech Depot India.
The M5 Stack Goplus2 is a compact dual-channel DC motor and servo driver module built on the STM32F0 microcontroller, designed for precise motion control in robotics and automation projects. Professional engineers and hobbyists use this module to control brushed DC motors and servo actuators simultaneously with PWM speed regulation and directional control. It solves the critical challenge of integrating multiple motor types in space-constrained applications while maintaining real-time control accuracy and thermal stability.
Specifications
| Specification | Details |
| Product Type | Dual-Channel DC Motor and Servo Driver Module |
| Microcontroller | STM32F0 ARM Cortex-M0 |
| Motor Channels | 2 independent channels |
| Operating Voltage | 5V to 12V DC |
| Continuous Current Per Channel | 2A maximum |
| Peak Current Per Channel | 3A with thermal protection |
| PWM Frequency | 1kHz to 20kHz adjustable |
| Servo Control | 0.5ms to 2.5ms pulse width |
| Communication Protocol | I2C, UART, GPIO PWM |
| Operating Temperature | -10C to 60C |
| Brand | M5 Stack |
| Origin | Original/Authentic |
Why Choose M5 Stack Goplus2 DC Motor and Servo Driver Module (STM32F0)?
100% Authentic
GST Invoice - A GST invoice is included with every order.
Expert Support - Dedicated technical help on WhatsApp and email.
Pan-India Delivery - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.
Trusted by Makers - Used by students, hobbyists and professionals nationwide.
Key Features of M5 Stack Goplus2 DC Motor and Servo Driver Module (STM32F0)
- Dual independent motor channels enabling simultaneous control of two DC motors or mixed DC and servo configurations with isolated PWM signals
- STM32F0 microcontroller with 32-bit ARM Cortex-M0 architecture providing deterministic real-time control and advanced motion algorithms
- Integrated H-bridge driver circuits with thermal protection and overcurrent detection preventing hardware damage during stalled motor conditions
- Adjustable PWM frequency from 1kHz to 20kHz allowing optimization for different motor types and noise characteristics
- M5 Stack ecosystem compatibility with stackable connector interface reducing wiring complexity in multi-module robotic systems
- Built-in voltage regulation supporting 5V to 12V input range with protection against reverse polarity and transient spikes
- Multiple communication protocols including I2C, UART, and direct GPIO PWM for flexible integration with various microcontroller platforms
Perfect For
- Mobile robotics platforms requiring synchronized control of drive motors and directional servo steering mechanisms in autonomous navigation systems
- Industrial automation conveyor belt control systems where precise speed regulation and emergency stopping are critical safety requirements
- Educational robotics competitions demanding compact, reliable motor control solutions for wheeled and articulated robot designs
- Drone gimbal stabilization systems utilizing servo-based camera positioning with simultaneous motor control for propeller speed regulation
- CNC machine tool control applications managing spindle motors and positioning stepper motors through unified driver architecture
- Robotic arm joint actuation where multiple servo motors require synchronized motion planning and real-time feedback control
How to Use
Begin by connecting the Goplus2 module to your M5 Stack core unit through the stackable connector interface or via I2C pins for standalone operation. Supply power through the designated 5V to 12V input connector, ensuring proper polarity and adequate current capacity for your motor load. Connect your DC motors or servo actuators to the two output channels, verifying motor specifications match the module's 2A continuous current rating. Configure the STM32F0 firmware using the M5 Stack IDE or Arduino environment, setting PWM frequency, acceleration profiles, and communication parameters according to your application requirements.
Initialize the module by uploading the appropriate firmware library which handles motor initialization, direction control, and speed regulation. Use simple command functions to control motor speed from 0 to 255 (8-bit PWM), set rotation direction, and implement acceleration ramps for smooth motion. For servo control, configure pulse width values between 0.5ms and 2.5ms corresponding to your servo's range of motion. Monitor thermal status through the module's temperature sensor feedback and implement software limits to prevent overheating during extended operation. Test your configuration with incremental load increases to ensure stable operation before deploying in production robotic systems.
Product Overview
The Goplus2 DC Motor and Servo Driver Module operates on the principle of H-bridge motor control combined with STM32F0 firmware intelligence. The dual-channel architecture allows independent control of two DC motors or one DC motor plus one servo actuator through dedicated GPIO pins and PWM outputs. The STM32F0 processor handles real-time signal processing, providing smooth acceleration curves, directional switching, and emergency stop functionality. Each channel supports continuous current output with integrated thermal protection, making it suitable for sustained robotic operations without performance degradation.
The module features built-in voltage regulation and protection circuits that safeguard against reverse polarity, overcurrent, and thermal runaway conditions. Communication with the M5 Stack ecosystem occurs through standardized I2C or serial protocols, enabling seamless integration into larger automation systems. The compact form factor and stackable design reduce PCB real estate while the robust firmware ensures deterministic control timing critical for synchronized multi-motor applications in industrial and educational settings.
Frequently Asked Questions
Can I control two DC motors independently with different speeds and directions simultaneously?
Yes, the Goplus2 features two completely independent channels with separate H-bridge drivers and PWM control signals. Each channel can operate at different speeds from 0 to 255 PWM units and reverse direction independently, making it ideal for differential drive robots and multi-motor applications. The STM32F0 processor handles both channels without cross-interference, allowing true simultaneous control.
What is the maximum continuous current rating and how does thermal protection work?
Each channel supports 2A continuous current and 3A peak current with automatic thermal shutdown protection. The integrated temperature sensor monitors the H-bridge junction temperature, and firmware automatically reduces PWM duty cycle or triggers emergency shutdown if temperature exceeds safe limits. This prevents permanent hardware damage during stalled motor conditions or sustained high-load operation.
Is the module compatible with servo motors and how do I configure servo control?
Yes, one or both channels can control standard servo motors using 50Hz PWM with variable pulse width between 0.5ms and 2.5ms. Configure the module for servo mode through firmware settings, then use dedicated servo control commands specifying angle values from 0 to 180 degrees. The STM32F0 automatically generates the correct pulse timing without requiring external servo driver circuits.
What communication protocols does the Goplus2 support for integration with other microcontrollers?
The module supports I2C for daisy-chaining with other M5 Stack modules, UART serial communication for standalone operation, and direct GPIO PWM signal input from external microcontrollers. This flexibility allows integration with Arduino, Raspberry Pi, or industrial PLC systems through appropriate protocol adapters and firmware configuration.
How do I prevent motor stalling and implement acceleration ramps?
The firmware includes built-in acceleration profile functions that gradually increase PWM duty cycle over specified time intervals, preventing sudden current spikes and mechanical shock. Configure acceleration time constants in milliseconds, and the STM32F0 automatically generates smooth speed curves. Implement stall detection through current monitoring or external encoder feedback to trigger safety responses before thermal protection activates.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Customer Support
Email: techdepotindia@gmail.com
WhatsApp: Available for setup and troubleshooting help
Order your M5 Stack Goplus2 DC Motor and Servo Driver Module (STM32F0) today and start building your next project.
Buy M5 Stack Goplus2 DC Motor and Servo Driver Module (STM32F0) Online in India
Related: Browse more from our Microcontrollers collection, or see all products at Tech Depot India.