HobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed ??Controller
HobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed ??Controller
HobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed Controller
The HobbyWing QuicRun 1625 is a 25-ampere brushed electronic speed controller specifically engineered for RC cars, boats, and crawlers requiring robust motor control with waterproof protection. This ESC is widely used by hobbyists, competition racers, and remote control vehicle enthusiasts who demand reliable performance in wet and dusty environments. It solves the critical challenge of maintaining consistent motor acceleration, braking, and directional control while protecting sensitive electronics from water ingress and moisture damage.
Product Overview
The HobbyWing QuicRun 1625 operates on the principle of pulse-width modulation (PWM) to regulate DC motor speed by controlling the average voltage delivered to the motor windings. The controller features a fully sealed waterproof design with conformal coating on the PCB and rubber-sealed connectors, making it ideal for amphibious RC vehicles and water-based applications. The 25-ampere continuous current rating provides sufficient power handling for 1/10 to 1/8 scale brushed motors while maintaining thermal stability through intelligent current limiting and thermal management circuits.
This model distinguishes itself through its compact form factor, making it suitable for tight chassis installations in modern RC platforms. The QuicRun 1625 incorporates multiple protection features including low-voltage cutoff for lithium and NiMH batteries, thermal shutdown to prevent component damage, and reverse polarity protection. The controller supports both forward and reverse operation with adjustable acceleration curves, allowing users to fine-tune throttle response characteristics for different driving conditions and vehicle types.
Key Specifications
| Specification | Details |
| Product Type | Brushed Electronic Speed Controller (ESC) |
| Brand | HobbyWing |
| Model | QuicRun 1625 |
| Continuous Current Rating | 25 Amperes |
| Peak Current Rating | 50 Amperes (10 seconds) |
| Input Voltage Range | 2S-3S LiPo / 4-9 NiMH cells |
| Motor Connector Type | XT60 / Tamiya (standard) |
| Battery Connector Type | XT60 |
| Waterproof Rating | IP67 sealed design |
| Dimensions | 55 x 35 x 20 mm |
| Weight | 35 grams |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- Waterproof IP67 sealed construction with conformal coating protects against water submersion, rain, mud, and salt spray for amphibious and water-based RC applications
- 25-ampere continuous current capacity with 50-ampere peak rating enables smooth power delivery to brushed motors in 1/10 and 1/8 scale vehicles without thermal throttling
- Dual battery chemistry support for 2S-3S LiPo and 4-9 cell NiMH configurations with automatic low-voltage cutoff prevents battery over-discharge and extends cell lifespan
- Adjustable acceleration curves and brake force modulation allow fine-tuning of throttle response characteristics for different driving styles and terrain conditions
- Thermal management system with automatic shutdown protection prevents component damage from sustained high-current draws and maintains reliability in extended racing sessions
- Compact 55 x 35 x 20 mm form factor fits into tight chassis spaces on modern RC platforms without requiring extensive modification
Applications and Use Cases
- Off-road RC buggies and trucks operating in wet, muddy, and dusty environments where waterproof protection is essential for component longevity and consistent performance
- RC boats and amphibious vehicles requiring sealed electronics that can withstand water submersion and maintain operational integrity during extended water-based sessions
- Rock crawlers and scale trail vehicles where precise motor control and low-speed torque management are critical for navigating challenging terrain
- Competitive racing platforms in 1/10 and 1/8 scale classes where reliable speed control and thermal stability during high-intensity racing sessions are paramount
- Educational robotics projects and DIY remote control platforms requiring a proven, user-friendly speed controller with comprehensive protection features
How to Use
Begin by connecting the HobbyWing QuicRun 1625 to your RC vehicle's electrical system. Connect the battery pack to the XT60 battery connector, ensuring correct polarity to avoid reverse polarity damage. Connect the brushed motor to the motor connectors, again verifying polarity for correct rotation direction. Connect your receiver to the signal input port using a standard servo cable, ensuring the signal wire connects to the white or yellow pin depending on your receiver type. Before first operation, perform a throttle calibration by powering on the receiver with the throttle stick in neutral position, then power on the ESC to allow it to recognize the neutral throttle point.
For optimal performance, configure the low-voltage cutoff setting based on your battery chemistry: set to 3.0V per cell for LiPo batteries or 1.0V per cell for NiMH batteries to prevent over-discharge. Adjust the acceleration curve setting to match your driving preferences, with lower settings providing smoother acceleration for precision driving and higher settings offering quicker throttle response for racing. Monitor the ESC temperature during extended use, particularly in high-current applications. If the controller becomes warm to the touch, reduce continuous throttle input or improve cooling by ensuring adequate airflow around the sealed housing. For waterproof applications, apply a thin silicone sealant around connector seams before water exposure to maintain IP67 protection integrity.
Frequently Asked Questions
Can the HobbyWing QuicRun 1625 handle 4S LiPo batteries?
No, the QuicRun 1625 is rated for maximum 3S LiPo (11.1V nominal) or 9-cell NiMH (10.8V nominal) batteries. Using 4S LiPo or higher voltage batteries will exceed the controller's voltage rating and cause permanent damage to internal components. Always verify your battery configuration matches the ESC specifications before connecting power.
What is the difference between continuous and peak current ratings?
The continuous 25-ampere rating represents the maximum current the ESC can safely handle indefinitely during normal operation without thermal shutdown. The 50-ampere peak rating is a brief maximum current capacity lasting up to 10 seconds during acceleration or high-load conditions. Sustained operation above 25 amperes will trigger thermal protection and reduce throttle output to prevent component damage.
How do I waterproof the connectors for submersion applications?
While the QuicRun 1625 features IP67 sealed design, apply a thin bead of waterproof silicone sealant around the battery and motor connector seams before water exposure. Allow the sealant to cure fully before submerging. For extended water operation, consider using heat shrink tubing over connector joints and applying dielectric grease to connector pins to minimize corrosion from saltwater or mineral-rich water.
Does the ESC require programming or configuration software?
The QuicRun 1625 does not require external programming software. All configuration is performed through the receiver's throttle stick using a simple menu system. Press the programming button on the ESC to enter setup mode, then use throttle stick positions to navigate settings including low-voltage cutoff, acceleration curve, and brake force. Refer to the included manual for detailed menu navigation instructions.
Can I use this ESC with brushless motors?
No, the QuicRun 1625 is specifically designed for brushed DC motors only. Brushless motors require a separate brushless ESC with sensored or sensorless commutation circuits. Using this brushed controller with brushless motors will result in non-operation and potential component damage. Always match your ESC type to your motor type.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy HobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed Controller Online in India
Purchase the HobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed Controller online at The Tech Depot, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on HobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed Controller with fast shipping and expert support.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.