Hobbywing quickrun 1060 60A brushed ESC1073166
Hobbywing quickrun 1060 60A brushed ESC1073166
Hobbywing quickrun 1060 60A brushed ESC1073166
The Hobbywing quickrun 1060 60A brushed ESC is a compact electronic speed controller designed for brushed DC motors in RC vehicles, delivering precise current regulation and thermal management up to 60 amperes continuous discharge. Professional RC racing enthusiasts, hobbyists building custom RC cars, boats, and crawlers rely on this controller for its robust performance and reliable commutation in high-demand applications. This ESC solves the critical problem of motor speed control and power distribution in battery-powered RC platforms, eliminating the need for mechanical gearboxes while providing smooth acceleration curves and regenerative braking capabilities.
Product Overview
The Hobbywing quickrun 1060 60A brushed ESC operates on a MOSFET-based power stage architecture that converts DC battery voltage into variable speed control for brushed motors through PWM (Pulse Width Modulation) at frequencies optimized for motor efficiency and minimal electromagnetic interference. The controller features integrated low-resistance power transistors that minimize heat dissipation, allowing sustained 60-ampere operation without external cooling in most applications. The firmware implements advanced commutation algorithms that detect motor back-EMF and adjust switching patterns dynamically, ensuring smooth torque delivery across the entire RPM range from crawling speeds to maximum velocity.
What distinguishes the quickrun 1060 from competing controllers is its compact form factor combined with programmable features that allow users to customize acceleration response, braking behavior, and low-voltage cutoff thresholds without requiring external programming devices. The integrated BEC (Battery Elimination Circuit) outputs stable 5V or 6V power for receiver and servo systems, eliminating the need for separate battery packs. Built-in thermal protection automatically throttles output when junction temperatures exceed safe limits, preventing catastrophic failure during extended high-load operation or in high-ambient-temperature environments.
Key Specifications
| Specification | Details |
| Product Type | Brushed DC Motor Electronic Speed Controller |
| Brand | Hobbywing |
| Model | quickrun 1060 |
| Continuous Current Rating | 60 Amperes |
| Peak Current Rating | 80 Amperes (10 seconds) |
| Input Voltage Range | 6V to 16.8V (2S to 4S LiPo) |
| BEC Output | 5V/6V selectable, 3A continuous |
| PWM Frequency | 16kHz (optimized for motor efficiency) |
| Control Protocol | PPM/PWM servo signal compatible |
| Dimensions | 68mm x 35mm x 20mm |
| Weight | 45 grams |
| Origin | Original/Authentic |
| Warranty | 7 days on manufacturing defects |
| Shipping | 1-5 days from Bengaluru |
| Delivery | 7-8 days across India |
| Support | 24/7 via Email and WhatsApp |
Key Features
- 60A continuous current handling with 80A peak rating enables high-torque applications including rock crawlers and off-road vehicles without thermal throttling
- Integrated 5V/6V BEC with 3A output capacity eliminates external power distribution complexity for receivers and servo systems
- 16kHz PWM switching frequency minimizes audible motor noise and electromagnetic interference while maximizing energy transfer efficiency
- Programmable acceleration curves and braking modes via transmitter allow fine-tuning of vehicle response characteristics for different driving conditions
- Automatic thermal shutdown protection prevents component damage by limiting current when internal temperature exceeds 80 degrees Celsius
- Low-voltage cutoff protection with adjustable threshold prevents LiPo battery over-discharge and extends battery lifespan
- Regenerative braking capability captures motor back-EMF energy during deceleration, returning charge to the battery pack
- Compact 68x35x20mm form factor fits easily in confined chassis spaces typical of modern RC vehicle designs
Applications and Use Cases
- RC Rock Crawlers and Scale Trail Trucks: The 60A rating with regenerative braking provides precise low-speed torque control essential for technical terrain navigation and realistic scale driving dynamics
- High-Performance RC Cars and Buggies: Supports powerful brushed motors in 1/10 and 1/8 scale racing platforms, delivering responsive acceleration and smooth speed modulation across competitive race tracks
- RC Boats and Water Vehicles: The compact design and sealed electronics withstand moisture exposure, making it ideal for freshwater RC boats requiring reliable speed control in variable water conditions
- Custom RC Crawlers with Multiple Motors: The 3A BEC capacity supports auxiliary servo systems for realistic steering and articulation in multi-motor configurations
- Educational Robotics Projects: Suitable for student-built autonomous vehicles and competition robots requiring brushed motor speed control with programmable behavior
- Industrial RC Applications: Used in remote-controlled inspection vehicles, material handling platforms, and prototype testing where brushed motor simplicity and cost-effectiveness are priorities
How to Use
Begin setup by connecting the ESC to your battery pack using the included XT60 or compatible connector, ensuring correct polarity to prevent reverse-polarity damage. Connect the motor leads to the ESC output terminals, observing that motor rotation direction can be reversed by swapping any two motor leads if needed. Insert the servo signal cable into the ESC receiver port, matching the signal ground and positive pins with your receiver output channel designated for throttle control. Power on your transmitter before connecting the battery to establish proper signal initialization and prevent unexpected motor activation.
Program the ESC by entering programming mode through your transmitter: move the throttle stick to maximum, power on the battery, wait for the audible confirmation beep, then adjust your desired settings using throttle stick positions to cycle through options. Configure the BEC voltage output (5V or 6V) based on your receiver and servo power requirements, set the low-voltage cutoff threshold appropriate for your battery chemistry (typically 3.0V per cell for LiPo), and select your preferred braking mode between off, light, and strong regenerative braking. Test the setup at low throttle in a safe area before full-power operation, confirming smooth acceleration response and proper motor direction. For extended operation above 30 minutes or in high-ambient temperatures, monitor the ESC case temperature and ensure adequate airflow around the heat-dissipating surfaces.
Frequently Asked Questions
What is the difference between continuous and peak current ratings on this ESC?
The 60A continuous rating represents the maximum sustained current the ESC can safely handle indefinitely without thermal throttling, suitable for extended driving sessions. The 80A peak rating allows short bursts up to 10 seconds for acceleration or high-load situations, but exceeding the continuous rating for prolonged periods triggers thermal protection that reduces output power. Choose your motor and battery combination such that typical driving loads remain below 50A continuous to maintain safety margins and extend component lifespan.
Can I use this ESC with LiPo batteries of different cell counts?
Yes, the quickrun 1060 accepts input voltages from 6V to 16.8V, covering 2S LiPo (7.4V nominal) through 4S LiPo (14.8V nominal) battery packs. However, you must adjust the low-voltage cutoff setting appropriately for your chosen battery chemistry: set it to 3.0V per cell for LiPo (6.0V for 2S, 9.0V for 3S, 12.0V for 4S) to prevent over-discharge damage. Never exceed 16.8V input voltage, as this will damage internal voltage regulation circuits. Always verify your battery pack nominal voltage before connecting to the ESC.
Does the integrated BEC provide enough power for my servo and receiver simultaneously?
The BEC outputs 3 amperes continuous at either 5V or 6V, which suffices for most standard servos and receivers in typical RC vehicles. However, high-torque digital servos or multiple servos may exceed this capacity. If you experience voltage sag or servo jitter, consider using a separate external BEC or battery eliminator circuit dedicated to servo power. Always connect the BEC positive and negative leads correctly to avoid reverse polarity damage to your receiver.
What motor types are compatible with this brushed ESC?
This controller is specifically designed for brushed DC motors with voltage ratings between 6V and 16.8V. It is NOT compatible with brushless outrunner or inrunner motors, which require brushless ESCs with sensored or sensorless commutation. Common compatible motors include modified brushed motors rated for 2S through 4S LiPo, vintage brushed RC motors, and industrial brushed DC motors within the voltage and current specifications. Always verify your motor's maximum voltage and current draw before connection.
How do I reverse motor direction without swapping wires?
The quickrun 1060 does not have a software-based direction reversal feature. To reverse motor rotation, physically swap any two of the three motor lead connections to the ESC output terminals. This reverses the polarity applied to the motor windings, causing rotation in the opposite direction. Make this change before powering on the system to avoid sudden unexpected movement. Mark your motor leads clearly to remember the correct orientation for future reference.
When will I receive my order?
Orders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.
What is your return and warranty policy?
We offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.
Are bulk discounts available?
Yes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.
Why Buy from The Tech Depot
- Genuine Products: Sourced directly from authorized distributors with authentication
- Expert Team: Our technical team validates every product before listing
- Fast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse
- Pan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata
- Payment Options: COD, UPI, credit/debit cards, net banking, EMI available
- Technical Support: 24/7 expert guidance via email and WhatsApp
- Returns: 7-day return policy on manufacturing defects only
Buy Hobbywing quickrun 1060
Buy Hobbywing quickrun 1060 60A brushed ESC1073166 Online in India
Purchase the Hobbywing quickrun 1060 60A brushed ESC1073166 online at The Tech Depot, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat.
Our team in Bengaluru is available 24/7 to support your journey from product selection to project completion.