Stuck trying to get a sensor reading back from the far end of a field, a warehouse, or a multi-storey building where plain WiFi just won't reach? The ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino is built around exactly that problem — long-range radio plus an onboard screen so you're not flying blind. Tech Depot India has it listed at Rs 3,190, and you can go straight to the ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino product page to check it out.
What is the ESP32 LoRa OLED module?
The pain point most makers run into with WiFi-only boards is range — once your sensor node is more than a room or two away from the router, the connection gets flaky or drops entirely. This board's answer is right there in the name: an ESP32 processor combined with an SX1278 LoRa radio, which is designed for long-distance, low-power wireless links, plus Bluetooth and WiFi for the shorter-range or local side of things.
The second problem it solves is visibility. A headless board tucked away outdoors gives you no feedback unless you're staring at serial monitor logs on a laptop. The 0.96 inch blue OLED screen built into this module means the board can show its own status, readings or connection state without any extra wiring. For the exact pin-out and how the display is driven, check the product listing before you plan your enclosure.
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino projects — what you can build
Here are honest, common possibilities for a board built this way — framed around the problems it's typically reached for, not tested claims about this specific unit:
- Long-range sensor nodes for locations plain WiFi can't reliably cover
- Standalone field displays that show live readings without needing a laptop nearby
- Agricultural or water-level monitoring nodes spread across a large area
- LoRa-to-WiFi/Bluetooth gateway or bridge experiments
- Battery-run remote units where the OLED helps with on-site debugging
- Asset or equipment trackers that need to report back over distance
ESP32 LoRa OLED module options compared
| Product | Price | Notes |
|---|---|---|
| ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino | Rs 3,190 | The standard-connector version of this LoRa + OLED module |
| 0.5 Inch OLED Display Arduino Shield | Rs 1,957 | A smaller OLED shield without LoRa radio |
| 0.91 OLED Display White 128x32 for Arduino Raspberry Pi I2C | Rs 331 | A standalone I2C display for Arduino or Raspberry Pi, no radio or WiFi module built in |
| ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino ( Type C- Connector ) | Rs 2,082 | Same LoRa + OLED combination, with a Type-C connector |
How to get started
The usual sticking point when you first bring a LoRa board home is the toolchain — getting the right ESP32 board definition installed in the Arduino IDE, and finding a compatible LoRa library. Start by confirming the connector and pin-out on the product page, install the board support package, and get a basic "print to OLED" sketch running before you attempt any radio work — it confirms the board and display are talking to your code before you add wireless complexity on top.
Once the display is working, bring up the LoRa link between two units at a short distance before you try your actual long-range deployment. It's a smaller, faster problem to debug than troubleshooting a flaky link from across a field.
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino specifications
Full and latest specifications for this board are listed on the product page — check there for pin-out, module variant and connector details before finalising your design.
Buy ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino Online in India
Tech Depot India ships pan-India — Bengaluru, Delhi NCR, Hyderabad, Mumbai, Chennai and beyond — with a GST invoice issued on every order. Payment is prepaid only, through Razorpay (UPI, cards or net-banking), and orders typically go out within 8-10 working days from our Bengaluru, Delhi NCR or Hyderabad locations. Every unit carries a 15-day warranty on manufacturing defects, provided the issue is reported within 5 days of delivery. If you're searching for the Best ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino India has to offer, order directly from the product page, browse related boards in the microcontrollers collection, or reach us on WhatsApp at https://wa.me/917828534155 or by email at techdepotindia@gmail.com if you have questions before you order.
Frequently asked questions
What is the price of the ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino in India?
It is listed at Rs 3,190 on Tech Depot India. This is the current price — check the product page for the latest figure before ordering.
How long does delivery take?
Orders ship from Bengaluru, Delhi NCR or Hyderabad and typically arrive pan-India within 8-10 working days.
What warranty applies if the board arrives faulty?
There's a 15-day warranty covering manufacturing defects, as long as the issue is reported within 5 days of delivery.
How do I pay, and is a GST invoice provided?
Payment is prepaid only, via Razorpay (UPI, cards or net-banking), and a GST invoice is issued with every order.
Will this board work with my existing Arduino or ESP32 setup?
That depends on your specific sketch, sensors and wiring, so check the product page for the connector and pin details along with your own board's documentation before assuming compatibility.