Want eyes on your 3D printer from across the room — or across the internet? The ArduCAM B0033R 3D Printer Camera, Arducam for Raspberry Pi 4/3B+/3 Camera, Octoprint Octopi Camera to Monitor 3D Printer, with 3.28FT/100CM Long Extension Flex Ribbon Cable for Pi is built exactly for that job, and it's Rs 1,237 at Tech Depot India. Grab the ArduCAM B0033R 3D Printer Camera, Arducam for Raspberry Pi 4/3B+/3 Camera, Octoprint Octopi Camera to Monitor 3D Printer, with 3.28FT/100CM Long Extension Flex Ribbon Cable for Pi and start watching your prints properly.
What is the ArduCAM B0033R 3D Printer Camera?
This is Arducam's B0033R camera built with the 3D-printing crowd in mind, made for Raspberry Pi 4, 3B+ and 3. If you're running Octoprint or OctoPi to control your printer, this camera slots right into that setup so you can watch your build plate remotely instead of hovering over the printer in person.
The standout detail for makers is the included 3.28ft/100cm extension flex ribbon cable — a full metre longer than the tiny stock cable most Pi cameras ship with. That extra length matters a lot once you're trying to mount a camera to actually see the nozzle and bed, not just wherever the Pi happens to be sitting. Full details are on the listing for the 3D printer camera for Raspberry Pi.
ArduCAM B0033R 3D Printer Camera, Arducam for Raspberry Pi 4/3B+/3 Camera, Octoprint Octopi Camera to Monitor 3D Printer, with 3.28FT/100CM Long Extension Flex Ribbon Cable for Pi projects — what you can build
- An OctoPrint/Octopi monitoring setup so you can check on a print from another room
- A remote print-farm camera if you're running more than one printer
- A time-lapse rig capturing your prints layer by layer
- A failure-detection camera so you catch a spaghetti print early instead of after it's wasted hours
- A nozzle-close-up camera thanks to the long extension cable giving you real mounting freedom
- A general Pi 4 workshop camera repurposed for other builds once the printer's sorted
Raspberry Pi 4B accessories compared
| Product | Price | Notes |
|---|---|---|
| ArduCAM B0033R 3D Printer Camera, Arducam for Raspberry Pi 4/3B+/3 Camera, Octoprint Octopi Camera to Monitor 3D Printer, with 3.28FT/100CM Long Extension Flex Ribbon Cable for Pi | Rs 1,237 | 3D printer camera for Pi 4/3B+/3 with a 100cm extension cable |
| 3 in 1 Black Aluminum Heat Sink for Raspberry Pi 4B | Rs 67 | 3-in-1 aluminum heat sink set in black for the Pi 4B |
| 3 in 1 Gold Aluminum Heat Sink for Raspberry Pi 4B | Rs 42 | 3-in-1 aluminum heat sink set in gold for the Pi 4B |
| 4 in 1 Aluminium Heat Sink for Raspberry Pi 4B | Rs 99 | 4-piece aluminium heat sink set for the Pi 4B |
Getting your print farm camera set up
Once this arrives, the workflow is pretty simple if you've already got OctoPrint running: connect the ribbon cable to your Pi's camera port, route the long extension to wherever gives you the best angle on the bed and nozzle, then enable the camera stream in OctoPrint's settings. Because the cable is a full metre long, you've got real freedom to mount the camera up high, off to the side, or wherever your printer's enclosure allows — something the stock short cable on most Pi cameras just won't let you do. For exact pinout and setup notes, check the product page alongside your Pi board's documentation.
ArduCAM B0033R 3D Printer Camera, Arducam for Raspberry Pi 4/3B+/3 Camera, Octoprint Octopi Camera to Monitor 3D Printer, with 3.28FT/100CM Long Extension Flex Ribbon Cable for Pi Specifications
For full and current specifications — sensor resolution, exact cable length and connector type — check the product page before ordering.
Buy ArduCAM B0033R 3D Printer Camera, Arducam for Raspberry Pi 4/3B+/3 Camera, Octoprint Octopi Camera to Monitor 3D Printer, with 3.28FT/100CM Long Extension Flex Ribbon Cable for Pi Online in India
We ship this camera to Bengaluru, Delhi NCR, Hyderabad, Mumbai, Chennai and pan-India, with a GST invoice on every order. Payment is prepaid only, through Razorpay via UPI, cards or net-banking, and delivery takes 8-10 working days. Print-farm owners searching for the ArduCAM B0033R 3D Printer Camera, Arducam for Raspberry Pi 4/3B+/3 Camera, Octoprint Octopi Camera to Monitor 3D Printer, with 3.28FT/100CM Long Extension Flex Ribbon Cable for Pi Price in India often call this the Best ArduCAM B0033R 3D Printer Camera, Arducam for Raspberry Pi 4/3B+/3 Camera, Octoprint Octopi Camera to Monitor 3D Printer, with 3.28FT/100CM Long Extension Flex Ribbon Cable for Pi pick, mostly thanks to that long cable. Every order is backed by a 15-day warranty on manufacturing defects, reported within 5 days of delivery. Got questions before you order? Ping us on WhatsApp or email techdepotindia@gmail.com, or check out our single-board computer accessories collection for more gear to round out your setup.
Frequently asked questions
What is the ArduCAM B0033R 3D Printer Camera, Arducam for Raspberry Pi 4/3B+/3 Camera, Octoprint Octopi Camera to Monitor 3D Printer, with 3.28FT/100CM Long Extension Flex Ribbon Cable for Pi Price in India?
It's priced at Rs 1,237 at Tech Depot India, with a GST invoice included on every order.
How long will delivery take?
Orders ship from Bengaluru, Delhi NCR or Hyderabad and reach you pan-India within 8-10 working days.
Is there a warranty on this camera?
Yes — a 15-day warranty on manufacturing defects, provided you report the issue within 5 days of delivery.
How can I pay for my order?
Payment is prepaid only, via Razorpay (UPI, cards or net-banking), and a GST invoice is issued with every order.
Will this camera work with my Raspberry Pi board?
It's listed for Raspberry Pi 4, 3B+ and 3, so check the product page and your board's own documentation to confirm compatibility before ordering.