{"product_id":"wanptek-kps3050d-30v-50a-high-precision-high-power-adjustable-led-dual-display-switching-dc-power-supply","title":"Wanptek KPS3050D 30V\/50A High Precision High Power Adjustable LED Dual Display Switching DC Power Supply","description":"\u003cmeta name=\"description\" content=\"Buy Wanptek KPS3050D 30V\/50A High Precision High Power Adjustable LED Dual Display Switching DC Power Supply online in India at best price from The Tech Depot, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eWanptek KPS3050D 30V\/50A High Precision High Power Adjustable LED Dual Display Switching DC Power Supply\u003c\/h1\u003e\n\n\u003cp\u003eThe Wanptek KPS3050D is a professional-grade programmable DC power supply delivering up to 30V and 50A continuous output, engineered for demanding laboratory, industrial, and research applications requiring stable, regulated power. Electronics engineers, technicians, and researchers rely on this unit for circuit testing, component characterization, battery charging, and prototype development where precision voltage and current control are critical. This high-power switching supply solves the challenge of maintaining stable output under varying load conditions while minimizing heat generation and power consumption compared to traditional linear supplies.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe Wanptek KPS3050D utilizes advanced switch-mode power supply technology to achieve high efficiency conversion of AC input to regulated DC output. The unit employs a three-stage regulation system combining input rectification, high-frequency switching at approximately 100kHz, and output filtering to deliver exceptionally clean DC with minimal ripple and noise. The dual LED digital display simultaneously shows both output voltage and current in real-time, enabling precise monitoring and adjustment of power parameters without external measurement equipment. This architecture allows the KPS3050D to deliver 1500W of continuous power while maintaining thermal stability through intelligent cooling management.\u003c\/p\u003e\n\n\u003cp\u003eWhat distinguishes the KPS3050D from conventional laboratory supplies is its combination of high current capacity with micro-precision voltage adjustment and independent current limiting capability. The front-panel potentiometers provide fine-grain control with voltage adjustment resolution of approximately 10mV and current adjustment resolution of approximately 10mA, making it suitable for sensitive semiconductor testing and delicate circuit commissioning. The unit features both analog adjustment controls and digital display feedback, allowing operators to set parameters visually and verify actual output values in real-time, critical for applications where voltage or current drift could damage expensive test components.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProgrammable Switching DC Power Supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWanptek\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eKPS3050D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage Range\u003c\/td\u003e\n\u003ctd\u003e0-30V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current Range\u003c\/td\u003e\n\u003ctd\u003e0-50A DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Power Output\u003c\/td\u003e\n\u003ctd\u003e1500W Continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Regulation (Load)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.01% plus 5mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Regulation (Load)\u003c\/td\u003e\n\u003ctd\u003eLess than 0.2% plus 10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Ripple and Noise\u003c\/td\u003e\n\u003ctd\u003eLess than 5mV RMS at full load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Display Resolution\u003c\/td\u003e\n\u003ctd\u003e0.01V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Display Resolution\u003c\/td\u003e\n\u003ctd\u003e0.1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Type\u003c\/td\u003e\n\u003ctd\u003eDual LED Digital Display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003eAC 110V-240V, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling Method\u003c\/td\u003e\n\u003ctd\u003eForced Air Cooling with Temperature Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e0 to 40 degrees Celsius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-10 to 60 degrees Celsius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eApproximately 440mm x 180mm x 360mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Features\u003c\/td\u003e\n\u003ctd\u003eOver-voltage Protection, Over-current Protection, Over-temperature Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eDual LED Digital Display with simultaneous voltage and current readout enabling real-time monitoring of output parameters without requiring external multimeters or measurement devices\u003c\/li\u003e\n\u003cli\u003eHigh-precision voltage adjustment with 10mV resolution and current limiting with 10mA resolution for sensitive component testing and prototype commissioning\u003c\/li\u003e\n\u003cli\u003eAdvanced switch-mode topology delivering 1500W continuous power with efficiency exceeding 85%, significantly reducing operational heat and cooling requirements compared to linear supplies\u003c\/li\u003e\n\u003cli\u003eIndependent voltage and current control allowing users to set maximum safe current limits, protecting expensive test components from accidental overcurrent damage\u003c\/li\u003e\n\u003cli\u003eComprehensive protection circuitry including over-voltage, over-current, and over-temperature shutdown preventing equipment damage and ensuring safe operation under fault conditions\u003c\/li\u003e\n\u003cli\u003eWide input voltage compatibility with automatic AC 110V-240V recognition supporting global usage without manual switching or external transformers\u003c\/li\u003e\n\u003cli\u003eOutput ripple specification below 5mV RMS at full load ensuring clean DC suitable for audio amplifier testing, precision analog circuits, and sensitive RF equipment\u003c\/li\u003e\n\u003cli\u003eForced-air cooling system with intelligent temperature monitoring maintaining stable performance during extended high-current operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eElectronics Laboratory Testing: Ideal for educational institutions and research labs requiring a versatile power source for circuit analysis, component characterization, and student experiments with precise voltage and current control\u003c\/li\u003e\n\u003cli\u003eBattery Charging and Formation: Suitable for charging lithium-ion, lead-acid, and nickel-metal hydride battery packs with programmable current limiting to prevent overcharge damage and optimize charging profiles\u003c\/li\u003e\n\u003cli\u003eSemiconductor Device Testing: Essential for semiconductor manufacturers and test engineers performing parametric testing of transistors, diodes, and integrated circuits requiring stable bias voltages and controlled current sourcing\u003c\/li\u003e\n\u003cli\u003ePrototype Development and Commissioning: Supports product development teams in powering prototype circuits during design verification, debugging, and performance validation with independent current limiting protecting expensive components\u003c\/li\u003e\n\u003cli\u003eIndustrial Equipment Repair and Troubleshooting: Enables service technicians to power industrial control systems, motor drives, and power electronics during repair and diagnostics with adjustable voltage preventing damage to sensitive circuits\u003c\/li\u003e\n\u003cli\u003eRF and Microwave Equipment Testing: Provides stable bias supplies for RF amplifiers, oscillators, and microwave components where low-noise DC is critical for accurate performance measurement\u003c\/li\u003e\n\u003cli\u003eLED Array and Lighting System Testing: Suitable for testing high-power LED arrays and lighting systems with current limiting protecting LEDs from thermal runaway during characterization\u003c\/li\u003e\n\u003cli\u003eElectroplating and Metal Finishing: Applicable in electroplating operations requiring precise current control and stable voltage for consistent metal deposition rates and plating quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eBegin by connecting the AC power input to a suitable wall outlet matching the supply voltage rating. Allow the unit approximately 30 seconds for internal stabilization before applying any load. The front panel features two adjustment potentiometers: the left potentiometer controls output voltage from 0-30V, while the right potentiometer controls maximum output current from 0-50A. Start with both potentiometers at minimum positions, then gradually increase voltage while monitoring the dual LED display. Connect your load to the output terminals, observing proper polarity with the red terminal as positive and black terminal as negative. Increase the current limit potentiometer to a value slightly above your expected load current, providing protection against accidental overcurrent conditions. The dual display continuously shows actual output voltage and current, allowing you to verify that your load is receiving the intended power parameters.\u003c\/p\u003e\n\n\u003cp\u003eFor sensitive applications like semiconductor testing or prototype commissioning, employ a methodical approach: first set your desired voltage without any load connected, then gradually introduce the load while monitoring current on the display. If the current exceeds your preset limit, the supply will automatically reduce voltage to maintain the current limit, protecting your circuit. The over-temperature protection will automatically shut down the supply if internal temperature exceeds safe limits, typically indicating that cooling airflow is obstructed or ambient temperature is excessive. Ensure adequate ventilation around the unit, maintaining at least 10cm clearance on all sides. The forced-air cooling fan operates continuously during normal operation, which is normal and indicates proper thermal management. After completing your work, reduce voltage to zero and switch off the unit, allowing it to cool for several minutes before disconnecting the load.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between voltage regulation and current regulation specifications?\u003c\/summary\u003e\n\u003cp\u003eVoltage regulation refers to the supply's ability to maintain constant output voltage despite changes in load current, specified as less than 0.01% plus 5mV. This means if you set 12V and the load current changes from 10A to 50A, the output voltage will remain within 12.005V to 12.005V, ensuring stable operation of voltage-sensitive circuits. Current regulation refers to the ability to maintain constant current output despite changes in load resistance, specified as less than 0.2% plus 10mA. When operating in constant-current mode with a 25A limit, the output current will remain within 25.05A to 25.05A even if load resistance changes, protecting components from overcurrent. These specifications ensure the KPS3050D performs reliably across diverse applications from precision analog circuits to robust industrial loads.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan the KPS3050D be used for charging lithium-ion batteries safely?\u003c\/summary\u003e\n\u003cp\u003eYes, the KPS3050D is well-suited for lithium-ion battery charging with proper precautions. Lithium-ion batteries require constant-current constant-voltage charging: the supply's independent current limiting allows you to set maximum charge current matching your battery's C-rating, while the voltage adjustment lets you set the target charge voltage typically 4.2V per cell. For a 3-cell battery pack requiring 12.6V at 10A maximum, set voltage to 12.6V and current limit to 10A. Monitor the dual display as charging progresses; when the current naturally decreases as the battery approaches full charge, the supply will maintain constant voltage while current tapers. However, always use a dedicated battery management system or charge controller for critical applications, as the KPS3050D lacks automatic charge termination logic. Never exceed the battery's rated voltage or current specifications, as lithium-ion cells can experience thermal runaway if overcharged.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat does output ripple specification mean and why does it matter?\u003c\/summary\u003e\n\u003cp\u003eOutput ripple refers to the small AC voltage variations superimposed on the DC output, specified as less than 5mV RMS at full load. This specification matters significantly for sensitive applications: audio amplifiers, precision analog circuits, and RF equipment perform best with clean DC containing minimal ripple. The KPS3050D's switch-mode architecture with advanced filtering achieves this low ripple through high-frequency switching at approximately 100kHz combined with multiple-stage LC filtering. For comparison, older linear supplies typically exhibit 50-100mV ripple due to 50\/60Hz rectification. The 5mV RMS ripple of the KPS3050D is approximately 20 times lower, making it suitable for powering low-noise audio preamplifiers, precision instrumentation, and sensitive analog-to-digital converters where ripple could introduce unwanted noise into measurements or audio signals.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I protect expensive test components from accidental damage?\u003c\/summary\u003e\n\u003cp\u003eThe KPS3050D provides multiple protection layers: first, always set the current limit potentiometer to a value slightly above your expected load current before connecting any load. This acts as a\n\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eBuy Wanptek KPS3050D 30V\/50A High Precision High Power Adjustable LED Dual Display Switching DC Power Supply Online in India\u003c\/h2\u003e\n\u003cp\u003ePurchase the \u003cstrong\u003eWanptek KPS3050D 30V\/50A High Precision High Power Adjustable LED Dual Display Switching DC Power Supply\u003c\/strong\u003e online at \u003ca href=\"https:\/\/thetechdepot.in\"\u003eThe Tech Depot\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat.\u003c\/p\u003e\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743704461569,"sku":"TES-EV0882757","price":37839.88,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/1628479-314x252.jpg?v=1778062154","url":"https:\/\/techdepot.in\/products\/wanptek-kps3050d-30v-50a-high-precision-high-power-adjustable-led-dual-display-switching-dc-power-supply","provider":"Tech Depot India","version":"1.0","type":"link"}