{"product_id":"servo-motor-360-degree-continuous-rotation","title":"Servo Motor - 360 degree Continuous Rotation","description":"\u003cmeta name=\"description\" content=\"Buy Servo Motor - 360 degree Continuous Rotation online in India at best price from The Tech Depot, Bengaluru. Authentic product, 7-day warranty on manufacturing defects, fast delivery across India.\"\u003e\n\n\u003ch1\u003eServo Motor - 360 degree Continuous Rotation\u003c\/h1\u003e\n\n\u003cp\u003eA 360-degree continuous rotation servo motor is a modified standard servo that removes the mechanical stop and potentiometer feedback, enabling unlimited full-rotation capability while maintaining precise speed control through PWM signals. Professional roboticists, automation engineers, and embedded systems developers use these motors for applications requiring continuous motion with directional control and variable speed regulation. This motor solves the limitation of standard servos which are restricted to 180-degree angular movement, making it essential for projects like mobile robots, pan-tilt camera systems, and rotating mechanisms that demand smooth, controllable continuous operation.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eThe 360-degree continuous rotation servo motor operates on the same control principle as standard servos but with internal modifications that eliminate the mechanical rotation stops and feedback potentiometer. Instead of position feedback, it uses PWM (Pulse Width Modulation) signals to control rotation speed and direction. A neutral pulse width (typically 1.5ms) stops the motor, shorter pulses rotate it counterclockwise, and longer pulses rotate it clockwise. The internal gearbox provides mechanical advantage and torque multiplication, allowing the motor to drive loads with significant resistance while maintaining smooth, controllable motion across a wide speed range from near-zero RPM to maximum rated speed.\u003c\/p\u003e\n\n\u003cp\u003eWhat distinguishes this servo model is its ability to deliver consistent torque throughout 360-degree rotation without dead zones or position limitations. The motor features a robust gearbox assembly rated for continuous duty cycles, making it suitable for extended operation in robotics projects and automated systems. The standard three-wire interface (signal, power, ground) ensures compatibility with microcontroller boards like Arduino, Raspberry Pi, and PIC controllers. Built-in protection circuitry safeguards against voltage spikes and reverse polarity, while the sealed gearbox design provides durability in varied environmental conditions typical of maker and professional electronics applications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eDetails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e360-Degree Continuous Rotation Servo Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eStandard Compatible (Futaba\/Hitec compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 days on manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping\u003c\/td\u003e\n\u003ctd\u003e1-5 days from Bengaluru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelivery\u003c\/td\u003e\n\u003ctd\u003e7-8 days across India\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e24\/7 via Email and WhatsApp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e4.8V to 6.0V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStall Torque\u003c\/td\u003e\n\u003ctd\u003e4.8kg-cm at 4.8V \/ 5.5kg-cm at 6.0V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Speed\u003c\/td\u003e\n\u003ctd\u003e0 to 60 RPM (variable with PWM control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Signal\u003c\/td\u003e\n\u003ctd\u003ePWM (Pulse Width Modulation) 1000-2000 microseconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e40.5mm x 19.5mm x 36.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 55 grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e360-Degree Unlimited Rotation: Continuous full-rotation capability with no mechanical stops, enabling applications requiring persistent rotational motion without angular restrictions\u003c\/li\u003e\n\u003cli\u003ePrecise PWM Speed Control: Variable speed regulation from 0 to 60 RPM through standard PWM signals, allowing smooth acceleration and deceleration profiles for controlled motion\u003c\/li\u003e\n\u003cli\u003eBidirectional Control: Neutral pulse stops rotation, shorter pulses trigger counterclockwise motion, longer pulses enable clockwise rotation with intuitive microcontroller integration\u003c\/li\u003e\n\u003cli\u003eHigh Torque Output: Delivers 4.8kg-cm stall torque at 4.8V and 5.5kg-cm at 6.0V, sufficient for driving wheels, gears, and mechanical loads in robotics platforms\u003c\/li\u003e\n\u003cli\u003eStandard Servo Interface: Three-wire connector (signal, power, ground) compatible with Arduino, Raspberry Pi, PIC, and all standard servo control libraries and PWM outputs\u003c\/li\u003e\n\u003cli\u003eDurable Gearbox: Metal-geared internal assembly rated for continuous duty cycles, providing reliability for extended operation in autonomous systems and industrial automation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eMobile Robot Locomotion: Drive wheels and propulsion systems in wheeled robots, autonomous vehicles, and line-following platforms requiring variable speed control and bidirectional motion\u003c\/li\u003e\n\u003cli\u003ePan-Tilt Camera Mechanisms: Continuous rotation for horizontal pan control in surveillance systems, allowing smooth 360-degree camera sweeping without mechanical limitations\u003c\/li\u003e\n\u003cli\u003eRotating Display Platforms: Museum exhibits, retail displays, and product showcases requiring continuous smooth rotation of objects for 360-degree visibility\u003c\/li\u003e\n\u003cli\u003eConveyor and Belt Drive Systems: Automation applications needing continuous belt or chain drive with adjustable speed, including material handling and manufacturing assembly lines\u003c\/li\u003e\n\u003cli\u003eRobotic Arm Joints: Continuous rotation joints in articulated robotic arms for applications requiring full-circle motion without position constraints\u003c\/li\u003e\n\u003cli\u003eWind-Up Mechanisms: Automated winding systems for cables, strings, and materials in industrial equipment, textile machinery, and laboratory automation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\n\u003cp\u003eTo use the 360-degree continuous rotation servo motor, first establish electrical connections by attaching the three-wire cable to your microcontroller: the red wire to power (4.8-6.0V), black wire to ground, and yellow\/white signal wire to a PWM-capable digital pin. Before powering the system, ensure your microcontroller is programmed with servo control code that generates PWM signals in the 1000-2000 microsecond range. The neutral position (approximately 1500 microseconds pulse width) stops the motor completely; reducing the pulse width below 1500 microseconds rotates the motor counterclockwise at variable speed, while increasing it above 1500 microseconds rotates clockwise. Most Arduino implementations use the Servo library, which simplifies control to simple write() commands specifying angle values that are internally converted to appropriate PWM signals.\u003c\/p\u003e\n\n\u003cp\u003eFor optimal performance, power the servo from a dedicated 5V regulated power supply capable of delivering at least 1 ampere during stall conditions, as drawing current directly from microcontroller pins can cause voltage drops and erratic behavior. If controlling multiple servos, use a servo driver module or power distribution board to prevent voltage sag. Test the motor response by gradually incrementing and decrementing the PWM values to verify smooth speed variation and confirm directional control before integrating into your complete system. Always include mechanical load testing at the intended operating voltage to ensure the motor provides sufficient torque for your application, and monitor temperature during extended operation to prevent thermal stress on the gearbox.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between this 360-degree servo and a standard servo motor?\u003c\/summary\u003e\n\u003cp\u003eStandard servo motors have mechanical stops that limit rotation to approximately 180 degrees and use position feedback from an internal potentiometer to maintain angular position. The 360-degree continuous rotation servo removes these mechanical stops and the potentiometer feedback circuit, enabling unlimited full rotation while using PWM pulse width to control speed and direction instead of position. This makes it ideal for applications requiring continuous motion like wheels, pan mechanisms, and rotating platforms.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I control the speed of the continuous rotation servo?\u003c\/summary\u003e\n\u003cp\u003eSpeed is controlled by varying the PWM pulse width around the neutral point of 1500 microseconds. A pulse width of exactly 1500 microseconds stops the motor. Pulse widths between 1000-1500 microseconds rotate the motor counterclockwise with speed increasing as you approach 1000 microseconds. Pulse widths between 1500-2000 microseconds rotate clockwise with speed increasing toward 2000 microseconds. Most Arduino code uses the Servo library with write() commands (0-180 range) where 90 represents stop, values below 90 are counterclockwise, and values above 90 are clockwise.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I use this servo with Arduino and Raspberry Pi?\u003c\/summary\u003e\n\u003cp\u003eYes, this servo is fully compatible with both Arduino and Raspberry Pi. Arduino users can utilize the standard Servo library with any PWM-capable digital pin. Raspberry Pi users need to generate PWM signals using GPIO pins with libraries like RPi.GPIO or pigpio. The three-wire connection is identical for both platforms: power to 5V, ground to GND, and signal to a PWM pin. Ensure your power supply can handle the servo current draw, particularly when multiple servos are operating simultaneously.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the maximum load this servo can handle?\u003c\/summary\u003e\n\u003cp\u003eThe servo provides 4.8kg-cm stall torque at 4.8V and 5.5kg-cm at 6.0V. To determine if it can handle your load, calculate the torque requirement by multiplying the load weight (in kg) by the distance from the rotation axis (in cm). For example, a 500-gram load at 10cm distance requires 5kg-cm of torque, which this servo can provide at 6.0V. Always include a safety margin and test the motor under actual load conditions to verify smooth operation without stalling.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e\n\u003cp\u003eOrders are dispatched within 1-5 business days from our Bengaluru warehouse. Delivery takes 7-8 days to most locations across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is your return and warranty policy?\u003c\/summary\u003e\n\u003cp\u003eWe offer a 7-day return policy on manufacturing defects only. Contact support within 7 days of receipt for free replacement or full refund. Not applicable for user damage or misuse.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e\n\u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eWhy Buy from The Tech Depot\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGenuine Products: Sourced directly from authorized distributors with authentication\u003c\/li\u003e\n\u003cli\u003eExpert Team: Our technical team validates every product before listing\u003c\/li\u003e\n\u003cli\u003eFast Shipping: Dispatched within 1-5 days from our Bengaluru warehouse\u003c\/li\u003e\n\u003cli\u003ePan-India Delivery: 7-8 days to Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata\u003c\/li\u003e\n\u003cli\u003ePayment Options: COD, UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003cli\u003eTechnical Support: 24\/7 expert guidance via email and WhatsApp\u003c\/li\u003e\n\u003cli\u003eReturns: 7-day return policy on manufacturing defects only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy Servo Motor - 360 degree Continuous Rotation Online in India\u003c\/h2\u003e\n\n\u003cp\u003ePurchase the \u003cstrong\u003eServo Motor - 360 degree Continuous Rotation\u003c\/strong\u003e online at \u003ca href=\"https:\/\/thetechdepot.in\"\u003eThe Tech Depot\u003c\/a\u003e, India's trusted source for genuine electronics. We deliver across Bengaluru, Mumbai, Delhi, Chennai, Hyderabad, Pune, Kolkata, Ahmedabad, Jaipur, and Surat. Get the best price on \u003cstrong\u003eServo Motor - 360 degree Continuous Rotation\u003c\/strong\u003e with fast shipping and expert support.\u003c\/p\u003e\n\n\u003cp\u003eOur team in Bengaluru is available 24\/7 to support your journey from product selection to project completion.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743643545857,"sku":"TTD-8342","price":884.99,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/0772577f803e14324018a84e3763c650.jpg?v=1778060884","url":"https:\/\/techdepot.in\/products\/servo-motor-360-degree-continuous-rotation","provider":"Tech Depot India","version":"1.0","type":"link"}