{"title":"Shields, HATs \u0026 Expansion Boards","description":"\u003cp\u003eAn add-on board that plugs straight on top of a Pi\/Arduino to give it a new ability. Stacks onto the main board to instantly add motor control, a display, GPS, or another feature without wiring from scratch.\u003c\/p\u003e\u003cp\u003ePart of our \u003ca href=\"\/collections\/boards-computing\"\u003eBoards \u0026amp; Computing\u003c\/a\u003e range.\u003c\/p\u003e","products":[{"product_id":"raspberry-pi-ai-hat-26-tops-high-performance-ai-accelerator","title":"Raspberry Pi AI HAT+ (26 TOPS) - High-Performance AI Accelerator","description":"\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e \u003cli\u003e \u003cstrong\u003eNeural Processor:\u003c\/strong\u003e Hailo-8 AI Accelerator\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePerformance:\u003c\/strong\u003e 26 TOPS (Double the original AI Kit)\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eHost Interface:\u003c\/strong\u003e PCIe Gen 3.0 (via RPi 5 FPC)\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eCooling:\u003c\/strong\u003e Integrated thermal management and heatsink\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eFrameworks:\u003c\/strong\u003e Native support for TensorFlow, PyTorch, and Keras\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eOperating System:\u003c\/strong\u003e Seamlessly detected by Raspberry Pi OS\u003c\/li\u003e \u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eAI Accelerator\u003c\/td\u003e \u003ctd\u003eHailo neural network processor\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePeak Performance\u003c\/td\u003e \u003ctd\u003eUp to 26 TOPS (INT8)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHost Interface\u003c\/td\u003e \u003ctd\u003ePCIe Gen 3 to Raspberry Pi 5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eForm Factor\u003c\/td\u003e \u003ctd\u003eStandard HAT+ with 40-pin GPIO header\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatibility\u003c\/td\u003e \u003ctd\u003eRaspberry Pi 5\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy Choose Raspberry Pi AI HAT+ (26 TOPS) - High-Performance AI Accelerator?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Raspberry Pi AI HAT+ (26 TOPS) - High-Performance AI Accelerator\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eCooling: Integrated thermal management and heatsink\u003c\/li\u003e \u003cli\u003eFrameworks: Native support for TensorFlow, PyTorch, and Keras\u003c\/li\u003e \u003cli\u003eOperating System: Seamlessly detected by Raspberry Pi OS\u003c\/li\u003e \u003cli\u003eOffloads neural network inference from the Pi 5 CPU for real-time performance\u003c\/li\u003e\n\u003cli\u003eWorks with the Raspberry Pi camera stack for on-device vision pipelines\u003c\/li\u003e\n\u003cli\u003eStandard HAT+ mechanical spec — stacks cleanly with the Pi 5 case ecosystem\u003c\/li\u003e\n\u003cli\u003eSupported by Raspberry Pi's official AI Kit software and model zoo\u003c\/li\u003e\n\u003cli\u003eLow power draw suited to always-on embedded deployments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eSmart security cameras and people\/object counting\u003c\/li\u003e \u003cli\u003eReal-time object detection for robotics on Raspberry Pi 5\u003c\/li\u003e \u003cli\u003eIndustrial inspection and defect-detection cameras\u003c\/li\u003e \u003cli\u003eHobbyist computer-vision and machine-learning projects\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eRaspberry Pi AI HAT+ (26 TOPS) - Professional AI Power for Pi 5\u003c\/h2\u003e\u003cp\u003eTransform your Raspberry Pi 5 into a high-performance machine vision workstation with the \u003cstrong\u003eRaspberry Pi AI HAT+\u003c\/strong\u003e. This premium 26 TOPS (Trillion Operations Per Second) variant features the \u003cstrong\u003eHailo-8\u003c\/strong\u003e NPU, enabling desktop-class AI inference directly at the edge. Whether you are developing autonomous systems, security analytics, or industrial inspection tools, the AI HAT+ provides the throughput you need without the lag of cloud processing. Buy with confidence from \u003cstrong\u003eTech Depot India\u003c\/strong\u003e in Bengaluru-where high-end tech \u003cstrong\u003e\u003c\/strong\u003e with a \u003cstrong\u003e\u003c\/strong\u003e and \u003cstrong\u003eUPI, cards \u0026amp; netbanking\u003c\/strong\u003e support.\u003c\/p\u003e\u003ch3\u003eWhy Genuine Raspberry Pi AI HAT+ Beats Clones?\u003c\/h3\u003e\u003cp\u003eGeneric AI accelerators often suffer from thermal throttling and unstable drivers. The genuine Raspberry Pi AI HAT+ is engineered for the Pi 5's power profile, ensuring peak 26 TOPS performance for reliable operation. Plus, as a Bengaluru-based store, we ensure you get original components with local tech support and a hassle-free warranty.\u003c\/p\u003e\u003ch3\u003eReal-World Project Use Cases\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e1. Real-Time Multi-Object Detection:\u003c\/strong\u003e Run high-accuracy YOLO models across multiple camera streams for industrial safety or traffic monitoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Smart Health Diagnostics:\u003c\/strong\u003e Deploy edge-based image classification models for rapid medical imaging analysis in remote areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Autonomous Drone Navigation:\u003c\/strong\u003e Use the massive NPU bandwidth for real-time obstacle avoidance and spatial mapping.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Is this compatible with Raspberry Pi 4?\u003c\/strong\u003e\u003cbr\u003eNo, this HAT requires the dedicated PCIe interface available only on the Raspberry Pi 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Does it include the Pi 5 board?\u003c\/strong\u003e\u003cbr\u003eNo, this is an add-on HAT. The Pi 5 board and power supply must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. How does it handle heat?\u003c\/strong\u003e\u003cbr\u003eThe HAT+ includes a pre-installed thermal pad and heatsink to ensure the Hailo-8 chip remains cool during intense inference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e4. Can I run custom models?\u003c\/strong\u003e\u003cbr\u003eYes, you can compile and optimize your own models using the Hailo TAPPAS software tools supported on the Pi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e5. What is the shipping time for Bengaluru?\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cdetails\u003e \u003csummary\u003eIs technical support available?\u003c\/summary\u003e \u003cp\u003eYes, responsive support via email and WhatsApp for setup, troubleshooting, and application guidance.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Raspberry Pi AI HAT+ (26 TOPS) - High-Performance AI Accelerator today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Raspberry Pi AI HAT+ (26 TOPS) - High-Performance AI Accelerator Online in India\u003c\/h2\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":48741254070529,"sku":"TTD-3305","price":12190.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/62e735c0efaee568ee6669e18c4f2c21.jpg?v=1778022484"},{"product_id":"2-channel-isolated-can-fd-expansion-hat-for-raspberry-pi","title":"2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi","description":"\u003cp\u003eThe 2-channel isolated CAN FD expansion HAT adds two high-speed CAN interfaces to the Raspberry Pi, supporting CAN FD up to 8Mbps with onboard isolation and protection. Checking the Raspberry Pi CAN FD HAT price in india? It is popular with industrial and automotive engineers in Bangalore and across India. Ships from our Bengaluru warehouse with a GST invoice.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eChannels\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2 x isolated CAN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eProtocols\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eCAN2.0 and CAN FD\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMax Data Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUp to 8Mbps\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eSPI (40-pin GPIO header)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eOnboard isolation \u0026amp; anti-interference\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eImported\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003cul\u003e\n\u003cli\u003eChannels: 2 x isolated CAN\u003c\/li\u003e\n\u003cli\u003eProtocols: CAN2.0 and CAN FD\u003c\/li\u003e\n\u003cli\u003eMax Data Rate: Up to 8Mbps\u003c\/li\u003e\n\u003cli\u003eInterface: SPI (40-pin GPIO header)\u003c\/li\u003e\n\u003cli\u003eProtection: Onboard isolation \u0026amp; anti-interference\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Imported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose 2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of 2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eStandard Raspberry Pi 40-pin GPIO header, fits the Pi series boards\u003c\/li\u003e \u003cli\u003eSupports both traditional CAN2.0 and faster CAN FD up to 8Mbps\u003c\/li\u003e \u003cli\u003eBreakout SPI pins for use with STM32, Arduino and other hosts\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eAutomotive device communication and diagnostics\u003c\/li\u003e \u003cli\u003eIndustrial automation and control networks\u003c\/li\u003e \u003cli\u003eMulti-channel CAN data acquisition with the Raspberry Pi\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes it support CAN FD?\u003c\/strong\u003e\u003cbr\u003eYes, it supports both CAN2.0 and CAN FD with data rates up to 8Mbps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it with boards other than the Pi?\u003c\/strong\u003e\u003cbr\u003eThe SPI control pins are broken out for hosts such as STM32 and Arduino.\u003c\/p\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eYes — message us on WhatsApp for bulk or business pricing on 2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your 2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy 2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/raspberry-pi\"\u003eRaspberry Pi \u0026amp; SBC\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48741323374849,"sku":"TTD-4044","price":4600.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/a0712871e1fc561f1f17e819b50b9b3f.jpg?v=1778023589"},{"product_id":"adsb-carrier-board","title":"ADSB Carrier Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe ADSB Carrier Board is a specialized interface module designed to integrate Automatic Dependent Surveillance-Broadcast (ADS-B) receiver modules with microcontroller platforms and embedded systems. Aviation professionals, drone operators, and aerospace engineers use this carrier board to decode aircraft position data and flight information in real-time applications. This product solves the integration challenge of connecting high-frequency RF ADS-B receivers to standard digital processing units without complex signal conditioning circuitry.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eADS-B Receiver Carrier Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Range\u003c\/td\u003e \u003ctd\u003e1090 MHz (ADS-B Band)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface Connectors\u003c\/td\u003e \u003ctd\u003eUART, SPI, USB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput Impedance\u003c\/td\u003e \u003ctd\u003e50 Ohms (RF matched)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Supply\u003c\/td\u003e \u003ctd\u003e5V to 12V DC\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCurrent Consumption\u003c\/td\u003e \u003ctd\u003e150-250 mA typical\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature\u003c\/td\u003e \u003ctd\u003e-10°C to 60°C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Dimensions\u003c\/td\u003e \u003ctd\u003e100 x 80 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose ADSB Carrier Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of ADSB Carrier Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003ePrecision 50-ohm RF impedance matching ensures maximum signal reception sensitivity and minimizes reflections at 1090 MHz\u003c\/li\u003e \u003cli\u003eMulti-protocol digital output support via UART, SPI, and USB allows compatibility with Arduino, Raspberry Pi, and industrial microcontrollers\u003c\/li\u003e \u003cli\u003eIntegrated low-noise amplifier (LNA) stage with automatic gain control provides consistent signal decoding across varying aircraft distances\u003c\/li\u003e \u003cli\u003eOnboard filtering and shielding reduces spurious RF interference and improves signal-to-noise ratio in urban environments\u003c\/li\u003e \u003cli\u003eWide input voltage range (5V to 12V) with integrated buck converters eliminates the need for external power conditioning modules\u003c\/li\u003e \u003cli\u003eStatus indicator LEDs for signal lock, data valid, and power supply monitoring enable real-time system diagnostics\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eFlight tracking and aircraft monitoring systems for aviation enthusiasts and commercial flight data collection networks\u003c\/li\u003e \u003cli\u003eUnmanned aerial vehicle (UAV) collision avoidance systems requiring real-time aircraft position awareness and traffic alerts\u003c\/li\u003e \u003cli\u003eAirport ground-based surveillance systems for detecting and logging ADS-B transmissions from arriving and departing aircraft\u003c\/li\u003e \u003cli\u003eAerospace research and development projects studying aircraft performance data and communication protocol analysis\u003c\/li\u003e \u003cli\u003eEmergency response and search-and-rescue operations requiring rapid deployment of portable ADS-B receivers\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by connecting your ADS-B receiver module to the carrier board's RF input connector, ensuring proper impedance matching and secure mechanical coupling. Power the board using a regulated 5V to 12V DC supply connected to the dedicated power input header. The board will automatically initialize upon power-up, with the power indicator LED confirming successful voltage regulation. Configure your microcontroller's UART or SPI interface to match the carrier board's output protocol settings, typically 115200 baud for UART operation.\u003c\/p\u003e\u003cp\u003eOnce powered and connected, the carrier board will begin decoding ADS-B signals from aircraft within reception range. Monitor the signal lock LED to confirm successful receiver synchronization. If using UART output, connect the TX pin to your microcontroller's RX pin through a 3.3V to 5V level shifter if required. For optimal performance, position the antenna at least 1 meter away from the carrier board to minimize self-interference. Test the system using open-source ADS-B decoder software like Dump1090 or ModeSdeco2 to verify data reception and aircraft message decoding accuracy.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe ADSB Carrier Board functions as a bridge between raw ADS-B RF signals and digital data processing systems. It incorporates precision impedance-matched traces, signal filtering, and level-shifting circuitry to convert 1090 MHz ADS-B signals into clean digital outputs compatible with UART, SPI, or USB interfaces. The board features integrated decoupling networks and shielding to minimize electromagnetic interference, ensuring reliable reception of aircraft transponder signals even in environments with high RF noise. The design follows aviation standards for signal integrity and timing accuracy, making it suitable for both hobbyist flight tracking applications and professional air traffic monitoring systems.\u003c\/p\u003e\u003cp\u003eThis carrier board eliminates the need for custom PCB design and manual RF impedance calculations, reducing development time from weeks to hours. The onboard voltage regulators support multiple power supply options from 5V to 12V, while the modular connector interface allows seamless integration with popular receiver modules from manufacturers like Radarcape and RTL-SDR dongles. Built-in status LEDs provide visual feedback on signal lock and data transmission, enabling quick troubleshooting during field deployment.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum reception range of the ADSB Carrier Board?\u003c\/summary\u003e \u003cp\u003eThe reception range depends on antenna height, RF environment, and aircraft altitude. Typical line-of-sight range is 200-250 km for aircraft at cruising altitude. With an elevated outdoor antenna and low-noise environment, ranges exceeding 400 km are achievable. Urban environments with RF interference may reduce range to 100-150 km.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use this carrier board with RTL-SDR dongles?\u003c\/summary\u003e \u003cp\u003eYes, the ADSB Carrier Board is compatible with RTL-SDR dongles through appropriate adapter connectors. However, RTL-SDR dongles typically require software-based demodulation using tools like Dump1090, whereas this carrier board provides hardware-decoded digital output directly.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat antenna should I use with this carrier board?\u003c\/summary\u003e \u003cp\u003eUse a 1090 MHz quarter-wave monopole antenna or commercial aviation band antenna. A 7.8 cm vertical monopole antenna provides good omnidirectional coverage. Ensure the antenna connector matches your receiver module specifications, typically SMA or N-type connectors.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs this board suitable for indoor installation?\u003c\/summary\u003e \u003cp\u003eIndoor installation is possible but will significantly reduce reception range due to building attenuation at 1090 MHz. For optimal performance, mount the antenna outdoors or near a window with clear sky view. Indoor range typically drops to 30-50 km depending on building materials.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your ADSB Carrier Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy ADSB Carrier Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48741387698433,"sku":"TTD-4973","price":17620.49,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/68ca51dc8b1b3da2a90e2a0666ba4c53.jpg?v=1778024820"},{"product_id":"light-expansion-board","title":"Light Expansion Board","description":"\u003cp\u003eLight Expansion Board\u003c\/p\u003e\u003ch2\u003eWhy Choose Light Expansion Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eYes — message us on WhatsApp for bulk or business pricing on Light Expansion Board.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Light Expansion Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Light Expansion Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48742568624385,"sku":"TTD-7023","price":305.28,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/9a63540c8f7770ce420f6e17a6979559.jpg?v=1778030661"},{"product_id":"d1-tf-module-tf-card-expansion-board","title":"D1 TF Module – TF Card Expansion Board","description":"\u003cp\u003eD1 TF Module – TF Card Expansion Board\u003c\/p\u003e\u003ch2\u003eWhy Choose D1 TF Module – TF Card Expansion Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eYes — message us on WhatsApp for bulk or business pricing on D1 TF Module – TF Card Expansion Board.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your D1 TF Module – TF Card Expansion Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy D1 TF Module – TF Card Expansion Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48742568788225,"sku":"TTD-7028","price":72.08,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/69f41e280108b783687bee2a98ad8903.jpg?v=1778030667"},{"product_id":"d1-double-sided-breakout-pcb-proto-board-shield-with-berg-pins","title":"D1 Double Sided Breakout PCB Proto Board Shield with Berg Pins","description":"\u003cp\u003eD1 Double Sided Breakout PCB Proto Board Shield with Berg Pins\u003c\/p\u003e\u003ch2\u003eWhy Choose D1 Double Sided Breakout PCB Proto Board Shield with Berg Pins?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eHow long will delivery take?\u003c\/summary\u003e\u003cp\u003e\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is your return policy?\u003c\/summary\u003e\u003cp\u003eWe do not offer returns for change of mind.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat payment methods are accepted?\u003c\/summary\u003e\u003cp\u003e\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk \/ wholesale pricing?\u003c\/summary\u003e\u003cp\u003eYes — for bulk enquiries, WhatsApp us at +91 78285 34155.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your D1 Double Sided Breakout PCB Proto Board Shield with Berg Pins today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy D1 Double Sided Breakout PCB Proto Board Shield with Berg Pins Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/all\"\u003eour full catalog\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48742568984833,"sku":"TTD-7034","price":48.76,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/4e11fffff20bd4b77393667f4c4063c5.jpg?v=1778030674"},{"product_id":"blue-nano-io-shield-v1-0-simple-expansion-board-finished-board","title":"Blue NANO IO Shield V1.0 Simple Expansion Board Finished Board","description":"\u003cp\u003eBlue NANO IO Shield V1.0 Simple Expansion Board Finished Board\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eVersion\u003c\/td\u003e \u003ctd\u003eV1.0\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Board\u003c\/td\u003e \u003ctd\u003eArduino Nano\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eType\u003c\/td\u003e \u003ctd\u003eIO expansion shield\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Blue NANO IO Shield V1.0 Simple Expansion Board Finished Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Blue NANO IO Shield V1.0 Simple Expansion Board Finished Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eBreaks out Arduino Nano pins to a more accessible header layout\u003c\/li\u003e \u003cli\u003eSimple, ready-assembled expansion board — no soldering required to use it\u003c\/li\u003e \u003cli\u003eUseful for prototyping sensor and actuator connections quickly\u003c\/li\u003e \u003cli\u003eBlue PCB finish for easy visual identification on a bench\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003ePrototyping sensor and module wiring on an Arduino Nano\u003c\/li\u003e \u003cli\u003eBreadboard-free Nano projects needing accessible IO\u003c\/li\u003e \u003cli\u003eEducational electronics and robotics kits\u003c\/li\u003e \u003cli\u003eQuick sensor swap-in\/swap-out during development\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eYes — message us on WhatsApp for bulk or business pricing on Blue NANO IO Shield V1.0 Simple Expansion Board Finished Board.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Blue NANO IO Shield V1.0 Simple Expansion Board Finished Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Blue NANO IO Shield V1.0 Simple Expansion Board Finished Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48742569017601,"sku":"TTD-7035","price":131.18,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/69a4623107c93207ac96cafe7ef876dc.jpg?v=1778030675"},{"product_id":"micro-sd-card-module-tf-card-memory-shield-sd-storage-boad-for-arduino","title":"Micro Sd Card Module |Tf Card Memory Shield |Sd Storage Boad For Arduino","description":"\u003cp\u003eMicro Sd Card Module |Tf Card Memory Shield |Sd Storage Boad For Arduino\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eCard Support\u003c\/td\u003e \u003ctd\u003emicroSD \/ TF card\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface\u003c\/td\u003e \u003ctd\u003eSPI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible MCU\u003c\/td\u003e \u003ctd\u003eArduino\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Micro Sd Card Module |Tf Card Memory Shield |Sd Storage Boad For Arduino?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Micro Sd Card Module |Tf Card Memory Shield |Sd Storage Boad For Arduino\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eAdds removable microSD storage to an Arduino project over SPI\u003c\/li\u003e \u003cli\u003eLevel-shifting circuitry lets it interface safely with 5V Arduino boards\u003c\/li\u003e \u003cli\u003eSimple pin layout works with the standard Arduino SD library\u003c\/li\u003e \u003cli\u003eCompact module suits data-logging and file-storage projects\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eRapid prototyping on top of an existing Arduino board without extra breadboard wiring\u003c\/li\u003e \u003cli\u003eAdding a specific capability (motor control, extra proto space, connectivity) to a maker project\u003c\/li\u003e \u003cli\u003eClassroom and workshop demonstrations of shield-based expansion\u003c\/li\u003e \u003cli\u003eGeneral-purpose embedded-systems prototyping for makers and engineering students\u003c\/li\u003e \u003cli\u003eData logging sensor readings to a microSD card\u003c\/li\u003e\n\u003cli\u003ePlaying audio or reading configuration files from SD storage\u003c\/li\u003e\n\u003cli\u003eAdding removable storage to an embedded Arduino project\u003c\/li\u003e\n\u003cli\u003eEducational file-system and storage projects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk \/ wholesale pricing?\u003c\/summary\u003e\u003cp\u003eYes — for bulk enquiries, WhatsApp us at +91 78285 34155.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Micro Sd Card Module |Tf Card Memory Shield |Sd Storage Boad For Arduino today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Micro Sd Card Module |Tf Card Memory Shield |Sd Storage Boad For Arduino Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/arduino\"\u003eArduino\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743586693377,"sku":"TTD-7710","price":90.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/2edbaa50c8ee0a8e1fdaace480d4cfbb.jpg?v=1778060046"},{"product_id":"esp32-esp32s-wireless-wifi-bluetooth-module-adapter-board-support-for-esp-32-esp-32s","title":"ESP32 ESP32S Wireless Wifi Bluetooth Module Adapter Board Support for ESP-32 ESP-32S","description":"\u003cp\u003eESP32 ESP32S Wireless Wifi Bluetooth Module Adapter Board Support for ESP-32 ESP-32S\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eCompatible Modules\u003c\/td\u003e \u003ctd\u003eESP-32, ESP-32S\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eType\u003c\/td\u003e \u003ctd\u003eAdapter\/breakout board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConnectivity\u003c\/td\u003e \u003ctd\u003eWiFi + Bluetooth\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose ESP32 ESP32S Wireless Wifi Bluetooth Module Adapter Board Support for ESP-32 ESP-32S?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of ESP32 ESP32S Wireless Wifi Bluetooth Module Adapter Board Support for ESP-32 ESP-32S\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eBreaks out ESP-32\/ESP-32S module pins to a breadboard-friendly pitch\u003c\/li\u003e \u003cli\u003eSimplifies prototyping with bare ESP32 modules that lack a dev-board layout\u003c\/li\u003e \u003cli\u003eSupports the module's combined WiFi and Bluetooth connectivity\u003c\/li\u003e \u003cli\u003eUseful base for custom PCB designs built around the ESP32 module\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003ePrototyping with a bare ESP-32\/ESP-32S module on a breadboard\u003c\/li\u003e \u003cli\u003eCustom IoT hardware development before finalising a PCB\u003c\/li\u003e \u003cli\u003eEducational ESP32 wireless-communication projects\u003c\/li\u003e \u003cli\u003eBench testing ESP32 modules ahead of production design\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eHow long will delivery take?\u003c\/summary\u003e\u003cp\u003e\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is your return policy?\u003c\/summary\u003e\u003cp\u003eWe do not offer returns for change of mind.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat payment methods are accepted?\u003c\/summary\u003e\u003cp\u003e\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk \/ wholesale pricing?\u003c\/summary\u003e\u003cp\u003eYes — for bulk enquiries, WhatsApp us at +91 78285 34155.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your ESP32 ESP32S Wireless Wifi Bluetooth Module Adapter Board Support for ESP-32 ESP-32S today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy ESP32 ESP32S Wireless Wifi Bluetooth Module Adapter Board Support for ESP-32 ESP-32S Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/esp32\"\u003eESP32\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743594328321,"sku":"TTD-7808","price":36.15,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/d994fd4804997797f67ca5458d5cba24.jpg?v=1778060166"},{"product_id":"parallax-32702-cyber-bot-board-for-micro-bit","title":"Parallax 32702 cyber:bot board – for micro:bit","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 32702 cyber:bot board is a comprehensive robotics expansion platform designed specifically for BBC micro:bit microcontrollers, enabling educators and hobbyists to build autonomous mobile robots with advanced sensor integration and motor control capabilities. Professional educators, STEM curriculum developers, and robotics competition teams utilize this platform to teach embedded systems programming, sensor fusion, and real-time control algorithms in hands-on learning environments. This product solves the critical challenge of bridging the gap between basic microcontroller programming and practical robotics applications by providing pre-integrated motor drivers, sensor connectors, and power management in a compact form factor compatible with the micro:bit ecosystem.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eRobotics Expansion Board for BBC micro:bit\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel Number\u003c\/td\u003e \u003ctd\u003e32702\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMotor Driver Channels\u003c\/td\u003e \u003ctd\u003e2 independent DC motor channels with PWM speed control\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMotor Control Voltage Range\u003c\/td\u003e \u003ctd\u003e3V to 9V DC\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaximum Motor Current Per Channel\u003c\/td\u003e \u003ctd\u003e1.5A continuous, 2A peak\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensor Interface Connectors\u003c\/td\u003e \u003ctd\u003eMultiple analog and digital input headers for ultrasonic, IR, and environmental sensors\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCommunication Protocol\u003c\/td\u003e \u003ctd\u003eI2C and GPIO compatible with BBC micro:bit\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions\u003c\/td\u003e \u003ctd\u003eCompact form factor designed for standard robot chassis integration\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 32702 cyber:bot board – for micro:bit?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 32702 cyber:bot board – for micro:bit\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eDual independent motor drivers with PWM speed control enabling precise differential drive robot navigation and turning maneuvers\u003c\/li\u003e \u003cli\u003eIntegrated power distribution and voltage regulation supporting standard 4-6 AA battery packs with reverse polarity protection\u003c\/li\u003e \u003cli\u003eMultiple sensor interface headers for simultaneous connection of ultrasonic distance sensors, infrared line-following sensors, and temperature\/humidity modules\u003c\/li\u003e \u003cli\u003eFull micro:bit edge connector compatibility with additional breakout headers for custom GPIO and I2C device integration\u003c\/li\u003e \u003cli\u003eStatus indicator LEDs for real-time motor control state visualization and debugging during programming development\u003c\/li\u003e \u003cli\u003eOver-current protection and thermal management preventing hardware damage from programming errors or sensor faults\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eEducational robotics curricula in secondary schools where students program autonomous line-following robots using MakeCode visual programming or Python text-based coding\u003c\/li\u003e \u003cli\u003eSTEM competition preparation including robotics challenges requiring obstacle avoidance, maze navigation, and object detection using integrated sensor arrays\u003c\/li\u003e \u003cli\u003eMaker and hobbyist projects building custom autonomous vehicles with sensor fusion for environmental mapping and adaptive behavior algorithms\u003c\/li\u003e \u003cli\u003eUniversity-level embedded systems laboratories where students develop real-time control systems and study motor control theory through practical implementation\u003c\/li\u003e \u003cli\u003eRobotics clubs and after-school programs introducing students to mechatronics principles through hands-on assembly and programming of complete mobile platforms\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by carefully aligning the Parallax 32702 cyber:bot board with the BBC micro:bit's 40-pin edge connector and firmly pressing downward until the board is fully seated. Ensure the micro:bit is oriented correctly with the LED matrix visible and the USB port accessible for programming. Connect your motors to the designated motor output headers, observing correct polarity as indicated by the board silkscreen markings. Attach your power source (typically 4-6 AA batteries in a holder) to the power input connector, again verifying correct polarity to avoid damaging the board's voltage regulation circuitry.\u003c\/p\u003e\u003cp\u003eOnce hardware assembly is complete, connect your micro:bit to a computer via USB and open the MakeCode editor or Python IDE of your choice. The cyber:bot board operates through standard micro:bit GPIO pins and I2C communication, so you can immediately begin programming motor control sequences using native micro:bit blocks or Python libraries. Test motor functionality with simple speed and direction commands before integrating sensor inputs. Connect your sensors to the appropriate analog or digital input headers, then develop algorithms for autonomous behavior such as obstacle avoidance or line-following. The integrated status LEDs provide visual feedback during testing, helping you verify that motor commands are being executed correctly before deploying your robot for autonomous operation.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 32702 cyber:bot board functions as a complete robotics platform that mounts directly onto a BBC micro:bit, transforming it into a fully-featured robot controller. The board integrates dual motor drivers capable of independent speed and direction control, allowing precise management of differential drive systems commonly used in mobile robotics. Built-in power distribution circuitry manages voltage regulation from standard battery sources, while the onboard sensor interface headers support analog and digital inputs for ultrasonic distance sensors, line-following infrared sensors, and environmental monitoring devices. The cyber:bot board utilizes I2C and GPIO communication protocols native to the micro:bit, ensuring seamless integration with existing MakeCode and Python programming environments without requiring additional firmware modifications.\u003c\/p\u003e\u003cp\u003eWhat distinguishes the Parallax 32702 from competing solutions is its thoughtful engineering for educational robotics applications. The board features clearly labeled connector pinouts, integrated status LEDs for debugging motor control states, and a robust mechanical design that accommodates standard servo motors and geared DC motors commonly available in educational robotics kits. The power management system includes reverse polarity protection and over-current limiting, preventing damage from common user errors during assembly and programming. Additionally, the cyber:bot board maintains full compatibility with the micro:bit's 40-pin edge connector while providing additional breakout headers for custom sensor integration, making it suitable for both structured curriculum implementation and open-ended maker projects.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum current draw and can I use standard AA batteries?\u003c\/summary\u003e \u003cp\u003eThe Parallax 32702 cyber:bot board supports motor currents up to 1.5A continuous per channel with 2A peak capability. Standard 4-6 AA battery packs provide sufficient current for typical educational robotics applications with small geared motors drawing 200-500mA each. For higher-performance motors exceeding 1A per channel, consider using rechargeable NiMH batteries or external power supplies rated for 3-9V DC. Always verify your specific motor specifications against the board's current ratings before assembly.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs the cyber:bot board compatible with all BBC micro:bit versions?\u003c\/summary\u003e \u003cp\u003eThe Parallax 32702 cyber:bot board is fully compatible with BBC micro:bit v1 and v2 models. Both versions feature the 40-pin edge connector that the board uses for communication and power distribution. However, ensure your micro:bit firmware is updated to the latest version for optimal compatibility with MakeCode and Python programming environments. The board's I2C and GPIO functionality works identically across both micro:bit generations.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I connect multiple sensors simultaneously to the cyber:bot board?\u003c\/summary\u003e \u003cp\u003eYes, the Parallax 32702 cyber:bot board provides multiple sensor interface headers supporting simultaneous connection of ultrasonic distance sensors, infrared line-following sensors, and environmental monitoring modules. The board utilizes both analog and digital GPIO pins from the micro:bit, as well as I2C communication for compatible sensors. Refer to the board's pinout documentation to plan your sensor integration and ensure you do not exceed the micro:bit's GPIO availability or I2C address conflicts when connecting multiple devices.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 32702 cyber:bot board – for micro:bit today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 32702 cyber:bot board – for micro:bit Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743599079681,"sku":"TTD-7851","price":13366.92,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/1963b52255640309d5796a73fd73713c.png?v=1778060229"},{"product_id":"parallax-64006-es-p2-es-eval-board-accessory-set","title":"Parallax 64006-ES P2-ES Eval Board Accessory Set","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 64006-ES P2-ES Eval Board Accessory Set is a comprehensive collection of components and peripherals designed to extend the functionality and capabilities of the Parallax P2 Propeller microcontroller evaluation board. Electronics engineers, embedded systems developers, and IoT prototypers use this accessory set to rapidly prototype and evaluate advanced microcontroller applications with expanded I\/O options and sensor integration capabilities. This set solves the critical challenge of having all necessary components readily available for comprehensive P2 evaluation without sourcing individual parts from multiple vendors.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eMicrocontroller Evaluation Board Accessory Set\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Incorporated\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Platform\u003c\/td\u003e \u003ctd\u003eParallax P2-ES Propeller Evaluation Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProcessor Architecture\u003c\/td\u003e \u003ctd\u003e8-core 32-bit Propeller P2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V and 5V compatible components\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface Standards\u003c\/td\u003e \u003ctd\u003eSPI, I2C, UART, GPIO\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64006-ES P2-ES Eval Board Accessory Set?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64006-ES P2-ES Eval Board Accessory Set\u003c\/h2\u003e\u003cul\u003e \u003cli\u003ePre-selected component compatibility with Parallax P2-ES evaluation platform ensuring zero integration issues and immediate usability\u003c\/li\u003e \u003cli\u003eMulti-interface sensor modules including analog, digital, and communication-based sensors for comprehensive system evaluation\u003c\/li\u003e \u003cli\u003eBreadboard-friendly connectors and pin headers enabling rapid prototyping without soldering or specialized equipment\u003c\/li\u003e \u003cli\u003eDocumentation and example code for each accessory component accelerating development cycle and reducing learning curve\u003c\/li\u003e \u003cli\u003eVoltage regulation and protection circuits included for safe operation across 3.3V and 5V logic domains\u003c\/li\u003e \u003cli\u003eModular design allowing selective use of components based on specific project requirements and application scope\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eIoT sensor networks and edge computing prototypes utilizing the P2's eight-core parallel processing for real-time sensor data aggregation and local processing\u003c\/li\u003e \u003cli\u003eRobotics control systems leveraging simultaneous motor control, sensor feedback processing, and communication protocols through independent processor cores\u003c\/li\u003e \u003cli\u003eIndustrial automation and process monitoring applications requiring deterministic real-time response and multi-channel data acquisition\u003c\/li\u003e \u003cli\u003eEducational embedded systems courses and workshops where students need comprehensive hands-on experience with microcontroller peripherals and sensor integration\u003c\/li\u003e \u003cli\u003eRapid prototyping of wireless communication systems combining P2 processing power with included communication modules for protocol evaluation\u003c\/li\u003e \u003cli\u003eReal-time signal processing applications exploiting the P2's parallel architecture for simultaneous data sampling and analysis\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by connecting the Parallax 64006-ES accessory components to your P2-ES evaluation board using the provided breadboard or direct header connections. Each component includes specific pinout documentation indicating which P2 I\/O pins provide optimal functionality. Install the Parallax Propeller Tool or PropellerIDE development environment on your computer and load the provided example code for each accessory module. The example code demonstrates proper initialization sequences, communication protocols, and interrupt handling specific to each component, accelerating your integration process.\u003c\/p\u003e\u003cp\u003eConfigure your development environment to target the P2 processor with appropriate clock settings and memory allocation. Most accessory modules operate at 3.3V logic levels matching the P2's native voltage; however, verify any 5V-tolerant inputs before connection. Leverage the P2's eight independent processor cores by assigning different sensors or communication tasks to separate cores, enabling true parallel processing without software-based time-sharing. Refer to the comprehensive documentation provided with each accessory for detailed electrical specifications, timing requirements, and advanced configuration options.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64006-ES P2-ES Eval Board Accessory Set provides a curated selection of components specifically engineered for the P2 Propeller evaluation platform. The Propeller P2 is a multi-core microcontroller with eight independent 32-bit processors running at up to 180 MHz, offering exceptional parallel processing capabilities for real-time applications. This accessory set includes breadboard-compatible components, sensor modules, communication interfaces, and development aids that facilitate rapid prototyping and comprehensive system evaluation without requiring external sourcing or compatibility verification.\u003c\/p\u003e\u003cp\u003eThe kit's design philosophy centers on reducing development friction by pre-selecting components that are electrically and mechanically compatible with the P2-ES evaluation board. Each component has been validated for proper voltage levels, signal integrity, and pinout compatibility, ensuring seamless integration into your development workflow. The accessory set enables developers to explore the full potential of the P2's eight-core architecture, advanced I\/O capabilities, and real-time processing features through hands-on experimentation with practical sensor and communication modules.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat components are included in the Parallax 64006-ES P2-ES Eval Board Accessory Set?\u003c\/summary\u003e \u003cp\u003eThe accessory set includes a curated selection of sensors, communication modules, interface components, and development aids specifically chosen for compatibility with the P2-ES evaluation board. Typical components include digital and analog sensors, serial communication modules, GPIO expansion interfaces, power regulation circuits, and breadboard-compatible connectors. The exact component list is provided in the detailed product documentation accompanying your purchase. All components are pre-validated for electrical and mechanical compatibility with the P2 platform.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs this accessory set compatible with other Parallax microcontroller platforms?\u003c\/summary\u003e \u003cp\u003eThe 64006-ES accessory set is specifically designed and validated for the Parallax P2-ES evaluation board. While some individual components may be compatible with other Parallax platforms, we recommend using components with their intended target platform to ensure proper voltage levels, pinout alignment, and software support. Contact our technical support team for compatibility assessments with other microcontroller boards.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat development tools and software are required to use these accessories?\u003c\/summary\u003e \u003cp\u003eYou will need the Parallax Propeller Tool or PropellerIDE, which are free open-source development environments available for Windows, Mac, and Linux. The P2 uses the Spin2 programming language and PASM2 assembly language for low-level operations. Example code provided with each accessory component demonstrates proper usage patterns. No additional commercial tools or licenses are required, though optional debugging tools can enhance your development experience.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use 5V sensors and components with the P2-ES evaluation board?\u003c\/summary\u003e \u003cp\u003eThe P2 processor operates at 3.3V logic levels. While some accessory components may include 5V-tolerant inputs, direct connection of 5V output sensors to P2 input pins can cause damage. The accessory set includes voltage regulation and level-shifting components for safe integration of 5V peripherals. Always verify the voltage specifications of additional components you plan to add and use appropriate level-shifting circuits when necessary.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64006-ES P2-ES Eval Board Accessory Set today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64006-ES P2-ES Eval Board Accessory Set Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743602848001,"sku":"TTD-7881","price":10484.88,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/040deaf32b054fe7ded03be577f0c0cf.jpg?v=1778060267"},{"product_id":"parallax-27130-super-carrier-board","title":"Parallax 27130 Super Carrier Board","description":"\u003cp\u003eParallax 27130 Super Carrier Board\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003ePart Number\u003c\/td\u003e \u003ctd\u003e27130\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eType\u003c\/td\u003e \u003ctd\u003eSuper Carrier Board\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 27130 Super Carrier Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 27130 Super Carrier Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eProvides a carrier\/breakout platform for Parallax microcontroller modules\u003c\/li\u003e \u003cli\u003eSimplifies prototyping by exposing module pins to accessible headers\u003c\/li\u003e \u003cli\u003ePart of the established Parallax educational and hobbyist ecosystem\u003c\/li\u003e \u003cli\u003eDurable board suited to repeated classroom or workshop use\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003ePrototyping projects with compatible Parallax microcontroller modules\u003c\/li\u003e \u003cli\u003eClassroom and STEM electronics programs\u003c\/li\u003e \u003cli\u003eHobbyist embedded electronics projects\u003c\/li\u003e \u003cli\u003eBench development before moving to a custom PCB\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eYes — message us on WhatsApp for bulk or business pricing on Parallax 27130 Super Carrier Board.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 27130 Super Carrier Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 27130 Super Carrier Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743602946305,"sku":"TTD-7882","price":4313.14,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/8f03665dfa2d2d4afb07785a18d9c509.jpg?v=1778060269"},{"product_id":"parallax-35000-board-of-education-shield-for-arduino","title":"Parallax 35000 Board of Education Shield for Arduino","description":"\u003cp\u003eParallax 35000 Board of Education Shield for Arduino\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003ePart Number\u003c\/td\u003e \u003ctd\u003e35000\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Platform\u003c\/td\u003e \u003ctd\u003eArduino\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eType\u003c\/td\u003e \u003ctd\u003eBoard of Education Shield\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 35000 Board of Education Shield for Arduino?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 35000 Board of Education Shield for Arduino\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eParallax 35000 Board of Education Shield for Arduino\u003c\/li\u003e\n\u003cli\u003eBrings the well-known Parallax \"Board of Education\" layout to Arduino\u003c\/li\u003e\n\u003cli\u003eProvides a breadboard and accessible screw terminals for classroom wiring\u003c\/li\u003e\n\u003cli\u003eAligns with existing Parallax educational curriculum and lesson plans\u003c\/li\u003e\n\u003cli\u003eSimplifies moving between Arduino and Parallax-based coursework\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eClassroom and self-study STEM kits for learning electronics and coding\u003c\/li\u003e \u003cli\u003eBeginner-friendly weekend project builds\u003c\/li\u003e \u003cli\u003eSchool and college mini-project submissions\u003c\/li\u003e \u003cli\u003eSTEM and classroom robotics\/electronics courses\u003c\/li\u003e\n\u003cli\u003ePrototyping sensor and circuit experiments on Arduino\u003c\/li\u003e\n\u003cli\u003eHobbyist projects following Parallax educational materials\u003c\/li\u003e\n\u003cli\u003eWorkshops standardising on the Board of Education format\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk \/ wholesale pricing?\u003c\/summary\u003e\u003cp\u003eYes — for bulk enquiries, WhatsApp us at +91 78285 34155.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 35000 Board of Education Shield for Arduino today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 35000 Board of Education Shield for Arduino Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/arduino\"\u003eArduino\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743603962113,"sku":"TTD-7886","price":4470.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/7f088b84e51ab47b50c9df5363e83450.jpg?v=1778060275"},{"product_id":"parallax-64009-p2-microsd-add-on-board","title":"Parallax 64009 P2 microSD Add-on Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 64009 P2 microSD Add-on Board is a specialized expansion module designed for the Parallax P2 microcontroller platform, enabling seamless integration of microSD card storage capabilities for data logging and file management applications. Professional embedded systems engineers, IoT developers, and robotics specialists utilize this board to extend their P2 projects with persistent non-volatile storage up to 2TB capacity. This add-on board solves the critical problem of limited onboard memory in microcontroller projects by providing reliable, high-speed microSD card interface with full read-write functionality.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003emicroSD Card Add-on Board for Parallax P2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Inc.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface Standard\u003c\/td\u003e \u003ctd\u003eSPI (Serial Peripheral Interface)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSupported Card Types\u003c\/td\u003e \u003ctd\u003emicroSD, microSDHC, microSDXC (up to 2TB)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCommunication Speed\u003c\/td\u003e \u003ctd\u003eUp to 25 MHz SPI clock frequency\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V logic level compatible\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConnector Type\u003c\/td\u003e \u003ctd\u003ePush-push microSD socket with detection switch\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBoard Dimensions\u003c\/td\u003e \u003ctd\u003eCompact stackable form factor\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64009 P2 microSD Add-on Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64009 P2 microSD Add-on Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eNative SPI Interface: Direct connection to Parallax P2 pins with no external signal conversion required, enabling plug-and-play integration with standard P2 development boards\u003c\/li\u003e \u003cli\u003eHot-Swap Capability: Push-push microSD socket allows insertion and removal of storage cards without powering down the P2 microcontroller, ideal for field data collection and rapid prototyping\u003c\/li\u003e \u003cli\u003eLevel Shifting Protection: Integrated circuitry automatically manages voltage translation between P2's 3.3V logic and microSD card specifications, preventing damage to either component\u003c\/li\u003e \u003cli\u003eESD Protection: Built-in electrostatic discharge protection diodes safeguard sensitive microSD card pins and P2 microcontroller GPIO pins during assembly, testing, and field operation\u003c\/li\u003e \u003cli\u003eStackable Design: Compact module dimensions allow vertical stacking with other P2 add-on boards, maximizing available space in robotics platforms and portable instruments\u003c\/li\u003e \u003cli\u003eCard Detection: Integrated mechanical switch detects microSD card presence, enabling firmware to implement intelligent card management and error handling routines\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eData Logging Systems: Autonomous environmental monitoring stations using P2 microcontrollers can record temperature, humidity, and pressure data continuously to microSD cards for long-term trend analysis and research applications\u003c\/li\u003e \u003cli\u003eRobotics Projects: Mobile robots and autonomous vehicles utilize this board to log sensor telemetry, navigation waypoints, and system diagnostics during field trials and competitions, enabling post-mission analysis and debugging\u003c\/li\u003e \u003cli\u003eIoT Edge Devices: Smart sensors and edge computing nodes equipped with P2 processors use microSD storage for local data buffering when cloud connectivity is intermittent, ensuring no data loss in remote installations\u003c\/li\u003e \u003cli\u003ePortable Instrumentation: Handheld measurement devices and field testing equipment leverage this add-on board to store calibration data, measurement results, and firmware updates without requiring external computers or network infrastructure\u003c\/li\u003e \u003cli\u003eEducational Projects: Student engineers and hobbyists use the board to build data acquisition systems, music players, and file management applications while learning embedded systems programming and file system concepts\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eTo integrate the Parallax 64009 P2 microSD Add-on Board into your project, first identify the available SPI pins on your P2 microcontroller board (typically pins designated for MOSI, MISO, CLK, and CS). Connect the board's pin header to these SPI pins, ensuring proper alignment with your P2's pinout diagram to avoid reversed connections. Insert a formatted microSD card (FAT16 or FAT32 filesystem recommended) into the push-push socket until you hear a click, indicating secure seating. The integrated card detection switch will automatically signal the P2 when a card is present, allowing your firmware to initialize the SPI communication bus and begin file operations.\u003c\/p\u003e\u003cp\u003eIn your P2 Spin2 or PASM2 code, initialize the SPI interface with appropriate clock frequency (typically 1-25 MHz depending on your microSD card's speed class rating) and implement file system routines using Parallax's microSD driver objects or compatible third-party libraries. Configure your CS (chip select) pin as a digital output and toggle it appropriately during SPI transactions. When writing critical data, implement proper error checking and card status verification to detect insertion\/removal events. Always unmount the filesystem gracefully before removing the microSD card to prevent data corruption. For optimal performance, use high-quality microSD cards rated Class 10 or faster, and maintain SPI trace lengths under 4 inches to minimize signal integrity issues at higher clock frequencies.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64009 P2 microSD Add-on Board implements a dedicated microSD card slot with integrated level-shifting circuitry and signal conditioning to ensure reliable communication between the P2's 3.3V logic levels and the microSD card interface. The board features a precision-engineered socket connector that maintains secure contact with microSD cards while allowing hot-swap capability for field data collection scenarios. The integrated circuitry includes protective filtering and impedance matching to minimize signal integrity issues across the SPI communication bus, ensuring consistent performance with cards ranging from Class 4 to Class 10 specifications and capacity ratings from 256MB to 2TB.\u003c\/p\u003e\u003cp\u003eThis add-on board leverages the P2 microcontroller's native SPI capabilities through dedicated pin headers, eliminating the need for external voltage regulators or complex signal conversion circuits. The compact form factor allows for stacking with other P2 expansion modules, making it ideal for space-constrained robotics platforms and portable data acquisition systems. The board's design incorporates ESD protection diodes and current-limiting resistors to safeguard both the P2 microcontroller and the microSD card from electrostatic discharge and accidental short circuits during development and field deployment.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum microSD card capacity supported by the Parallax 64009 board?\u003c\/summary\u003e \u003cp\u003eThe Parallax 64009 P2 microSD Add-on Board supports microSD, microSDHC, and microSDXC cards up to 2TB capacity. However, practical limitations depend on your P2 firmware implementation and the filesystem format used. Most applications work reliably with cards up to 512GB using FAT32 filesystem. For larger capacities, ensure your driver software supports exFAT or NTFS formats if required by your specific use case.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use this board with other microcontroller platforms besides the Parallax P2?\u003c\/summary\u003e \u003cp\u003eWhile the Parallax 64009 is specifically designed for P2 integration with optimized pin headers and form factor, the underlying SPI interface is standard. If your microcontroller supports SPI communication at 3.3V logic levels, you can adapt this board by connecting the SPI pins manually. However, you lose the convenient stackable design and may need external level shifting if your microcontroller operates at 5V logic levels.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat filesystem formats are compatible with the Parallax 64009 board?\u003c\/summary\u003e \u003cp\u003eThe board itself is hardware-agnostic regarding filesystem format. FAT16 and FAT32 are most commonly used with P2 projects due to excellent driver support and compatibility across platforms. Some advanced implementations support exFAT for larger files, though this requires more sophisticated driver code. Always format your microSD card on a computer using your intended filesystem before deploying it in your P2 project to ensure reliability.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes the board include pull-up resistors for SPI communication?\u003c\/summary\u003e \u003cp\u003eYes, the Parallax 64009 includes integrated pull-up resistors on the MISO line and CS line to ensure proper SPI signal levels and prevent floating logic states. These resistors are optimized for the P2's GPIO characteristics and typical microSD card specifications. If you're adapting this board for use with other microcontrollers, verify that additional external pull-ups are not required by checking your microcontroller's SPI interface specifications.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64009 P2 microSD Add-on Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64009 P2 microSD Add-on Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743604257025,"sku":"TTD-7891","price":940.22,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/f49dd3a025c16ae035be625460718c0c.png?v=1778060281"},{"product_id":"parallax-64006h-p2-eval-av-breakout-add-on-board","title":"Parallax 64006H P2 Eval AV Breakout Add-on Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection through project completion, providing application-specific guidance for audio-video integration with the Propeller 2 microcontroller platform.\u003c\/p\u003e\u003cp\u003eThe Parallax 64006H P2 Eval AV Breakout Add-on Board is a specialized expansion module designed for the Parallax Propeller 2 microcontroller evaluation platform, enabling seamless integration of audio and video capabilities into embedded systems projects. Electronics engineers, embedded systems developers, and IoT prototypers utilize this breakout board to rapidly prototype multimedia applications without complex signal conditioning or external interface circuitry. This add-on board solves the critical challenge of interfacing digital audio-video signals with the P2 microcontroller while maintaining signal integrity and reducing development time from concept to functional prototype.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eMicrocontroller Breakout Board - Audio Video Interface\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Inc.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel Number\u003c\/td\u003e \u003ctd\u003e64006H\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Platform\u003c\/td\u003e \u003ctd\u003eParallax Propeller 2 Evaluation Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAudio Interface\u003c\/td\u003e \u003ctd\u003eDigital Audio I\/O with standard connector support\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVideo Interface\u003c\/td\u003e \u003ctd\u003eComposite and component video output capability\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V logic levels compatible with P2 microcontroller\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConnector Type\u003c\/td\u003e \u003ctd\u003eStandard headers for P2 evaluation board integration\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Material\u003c\/td\u003e \u003ctd\u003eFR-4 with professional-grade signal routing\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64006H P2 Eval AV Breakout Add-on Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64006H P2 Eval AV Breakout Add-on Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eDirect P2 Evaluation Board Integration: Pre-configured pin headers eliminate custom wiring and reduce integration time by 60 percent compared to breadboard-based prototyping approaches\u003c\/li\u003e \u003cli\u003eDual Audio-Video Interface: Simultaneous audio input-output and video generation capability leverages Propeller 2 multi-core processing for real-time multimedia applications\u003c\/li\u003e \u003cli\u003eSignal Conditioning Circuitry: Integrated impedance matching and filtering networks maintain signal fidelity across audio frequencies from 20Hz to 20kHz and video bandwidths up to professional standards\u003c\/li\u003e \u003cli\u003eTest Point Access: Comprehensive oscilloscope-accessible test pads enable real-time signal verification and debugging without disrupting circuit operation\u003c\/li\u003e \u003cli\u003eCompact Modular Design: Stackable form factor allows multiple breakout boards to be combined for expanded I\/O capabilities in complex multimedia projects\u003c\/li\u003e \u003cli\u003eProfessional-Grade PCB: Multi-layer FR-4 construction with controlled impedance traces ensures minimal crosstalk and electromagnetic interference in sensitive audio-video signal paths\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eDigital Audio Processing Systems: Design real-time audio synthesizers, equalizers, and digital signal processors that generate high-quality audio output at CD-quality sampling rates using the P2's parallel processing cores\u003c\/li\u003e \u003cli\u003eVideo Generation and Display Control: Develop embedded video generation systems for retro computing projects, educational displays, and custom video output applications using standard composite or component video formats\u003c\/li\u003e \u003cli\u003eMultimedia Embedded Systems: Create IoT devices with audio-visual feedback capabilities such as smart speakers, interactive kiosks, and multimedia notification systems that require synchronized audio-video output\u003c\/li\u003e \u003cli\u003eEducational Robotics and Automation: Build robotic vision systems and automated inspection platforms that combine real-time video processing with audio feedback for interactive human-machine interfaces\u003c\/li\u003e \u003cli\u003ePrototype Development and Research: Accelerate embedded systems research by providing plug-and-play audio-video capabilities that eliminate hardware design cycles and focus development effort on firmware and algorithm optimization\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by carefully aligning the Parallax 64006H P2 Eval AV Breakout Add-on Board with the header pins on your Propeller 2 evaluation board, ensuring all pins are fully seated to establish reliable electrical connections. Power the P2 evaluation board through its standard USB or power connector while keeping the breakout board unpowered initially. This staged power-up approach prevents potential damage from transient voltage spikes during the mating process. Once physically integrated, verify continuity between corresponding pins on the breakout board and P2 using a multimeter set to continuity mode, paying particular attention to ground connections and critical signal lines.\u003c\/p\u003e\u003cp\u003eConfigure your Propeller 2 firmware to initialize the audio-video interface pins as specified in the Parallax documentation, typically assigning dedicated I\/O pins for audio clock, data, and video sync signals. Use the integrated test points to monitor signal integrity with an oscilloscope before connecting external audio or video equipment, verifying that clock frequencies match your intended audio sampling rate and video frame rate. Start with simple test patterns such as fixed-frequency audio tones and color bars to validate basic functionality before implementing complex multimedia algorithms. The Parallax Propeller Tool IDE provides example code and libraries specifically designed for this breakout board configuration, significantly reducing development time for audio-video integration tasks.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64006H P2 Eval AV Breakout Add-on Board extends the capabilities of the Propeller 2 evaluation platform by providing dedicated audio-video interface circuitry. The board features precision impedance-matched connectors and signal conditioning circuits that ensure clean digital audio transmission and video signal integrity across standard consumer and professional formats. The design incorporates proper termination networks and decoupling strategies to minimize electromagnetic interference and signal reflections, critical for maintaining data integrity when working with high-frequency audio and video streams at the microcontroller interface level.\u003c\/p\u003e\u003cp\u003eThis breakout board leverages the Propeller 2's multi-core architecture and high-speed I\/O capabilities to handle real-time audio processing and video generation tasks simultaneously. The board includes comprehensive pin headers that map directly to the P2 evaluation board, eliminating the need for custom wiring harnesses or breadboard prototyping. Built-in test points and diagnostic pads facilitate oscilloscope-based signal verification during development, while the compact form factor allows integration into space-constrained prototype enclosures without compromising accessibility to critical test and adjustment points.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum audio sampling rate supported by the 64006H breakout board?\u003c\/summary\u003e \u003cp\u003eThe Parallax 64006H supports audio sampling rates up to 48kHz when operating with the Propeller 2's standard clock configuration, sufficient for professional audio applications. Higher sampling rates up to 96kHz are achievable with custom clock divider configurations, though this requires careful firmware optimization to maintain real-time processing performance across multiple audio channels simultaneously.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan the 64006H generate HDMI video output or only composite video?\u003c\/summary\u003e \u003cp\u003eThe 64006H breakout board provides composite and component video output interfaces, not HDMI. HDMI output requires significantly higher bandwidth and specialized serialization circuitry beyond the scope of this evaluation board. For HDMI applications, you would need to integrate additional video encoder ICs or utilize the Propeller 2's raw I\/O capabilities with external HDMI transceiver modules.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs the 64006H compatible with Propeller 1 microcontrollers or only Propeller 2?\u003c\/summary\u003e \u003cp\u003eThe 64006H is specifically designed for the Propeller 2 evaluation platform and is not backward compatible with Propeller 1 systems. The pin configurations, voltage levels, and I\/O capabilities differ significantly between P1 and P2 architectures. Attempting to use this board with Propeller 1 will result in incorrect pin mappings and potential hardware damage.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes the breakout board include audio amplification or do I need external amplifiers?\u003c\/summary\u003e \u003cp\u003eThe 64006H provides line-level audio interface circuitry but does not include integrated power amplifiers for speaker-level output. For audio playback through speakers, you must connect the line-level audio output to an external audio amplifier or powered speaker system. This modular approach provides flexibility for integrating with various audio output devices without being constrained by fixed amplifier specifications.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e \u003cp\u003e\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64006H P2 Eval AV Breakout Add-on Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64006H P2 Eval AV Breakout Add-on Board Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/all\"\u003eour full catalog\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743604453633,"sku":"TTD-7893","price":2532.34,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/127ea789c0c718fcb43d0209a5c3959d.png?v=1778060284"},{"product_id":"parallax-64006f-p2-eval-serial-device-add-on-board","title":"Parallax 64006F P2 Eval Serial Device Add-on Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 64006F P2 Eval Serial Device Add-on Board is a specialized expansion module designed for the Propeller 2 (P2) microcontroller evaluation platform, enabling seamless serial communication and device interfacing capabilities. Electronics engineers, embedded systems developers, and educational institutions utilize this board to prototype and validate serial-based applications, IoT connectivity solutions, and multi-device communication networks. This add-on board solves the critical challenge of integrating legacy serial devices and modern communication protocols with the P2 platform while maintaining signal integrity and reducing development time.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eSerial Device Add-on Board for Propeller 2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Inc.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel Number\u003c\/td\u003e \u003ctd\u003e64006F\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSerial Protocol Support\u003c\/td\u003e \u003ctd\u003eRS-232 and TTL UART\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLogic Voltage Level\u003c\/td\u003e \u003ctd\u003e3.3V compatible with P2 microcontroller\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eNumber of Serial Channels\u003c\/td\u003e \u003ctd\u003eMultiple configurable channels\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface Connectors\u003c\/td\u003e \u003ctd\u003eDB-9 and pin headers for flexible connectivity\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eESD Protection\u003c\/td\u003e \u003ctd\u003eIntegrated surge and static protection circuits\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature\u003c\/td\u003e \u003ctd\u003e0 to 70 degrees Celsius\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64006F P2 Eval Serial Device Add-on Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64006F P2 Eval Serial Device Add-on Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eRS-232 and TTL Serial Interface Support: Dual protocol capability enables connection to both modern TTL-based sensors and legacy RS-232 industrial equipment without external adapters\u003c\/li\u003e \u003cli\u003eIntegrated Level-Shifting Circuitry: Automatic voltage translation between 3.3V P2 logic and RS-232 signal levels ensures signal integrity and eliminates cross-platform compatibility issues\u003c\/li\u003e \u003cli\u003eMultiple Channel Configuration: Flexible pin-breakout design allows developers to configure multiple independent serial communication channels for simultaneous multi-device interfacing\u003c\/li\u003e \u003cli\u003eESD and Surge Protection: Onboard protection circuitry safeguards sensitive microcontroller pins from electrostatic discharge and transient voltage spikes during real-world operation\u003c\/li\u003e \u003cli\u003ePlug-and-Play P2 Compatibility: Direct integration with Propeller 2 evaluation boards requires no external components or complex wiring modifications\u003c\/li\u003e \u003cli\u003eComprehensive Documentation: Includes detailed schematics, pin assignments, and example code for rapid prototyping and integration into custom applications\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eIndustrial Equipment Integration: Connect legacy serial-based industrial sensors, programmable logic controllers, and manufacturing equipment to modern P2-based control systems for retrofitting and system upgrades\u003c\/li\u003e \u003cli\u003eIoT Device Communication: Enable reliable serial communication between the P2 microcontroller and various IoT sensors, GPS modules, and wireless transceivers for location tracking and environmental monitoring applications\u003c\/li\u003e \u003cli\u003eEducational Electronics Projects: Ideal for university engineering programs and embedded systems courses where students need to prototype serial communication protocols and understand hardware-software integration principles\u003c\/li\u003e \u003cli\u003ePrototype Development and Testing: Accelerate development cycles for serial-based applications by providing a ready-made interface board that eliminates breadboard wiring complexity and improves signal reliability during testing phases\u003c\/li\u003e \u003cli\u003eData Acquisition Systems: Interface with serial-based analog-to-digital converters, temperature sensors, and pressure transducers for building comprehensive environmental monitoring and industrial automation solutions\u003c\/li\u003e \u003cli\u003eDevice Debugging and Analysis: Use as a development tool for validating serial communication protocols, testing UART implementations, and troubleshooting serial interface issues in P2-based designs\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by inserting the Parallax 64006F P2 Eval Serial Device Add-on Board into the designated expansion slot on your Propeller 2 evaluation platform, ensuring proper alignment with the connector pins. Once physically seated, connect your serial devices to the appropriate connectors on the board, selecting either the DB-9 connector for RS-232 devices or the pin headers for TTL-level serial connections. Before powering on the system, verify that your serial device operating voltages match the board's specifications and that all connections are secure to prevent intermittent communication failures.\u003c\/p\u003e\u003cp\u003eIn your PropellerIDE development environment, initialize the serial communication using Parallax's built-in UART libraries, specifying the appropriate baud rate, data bits, stop bits, and parity settings to match your connected serial device. The board's pin assignments are clearly documented in the accompanying schematic, allowing you to configure software serial objects to the correct physical pins. Test your implementation by transmitting simple command sequences to your serial device and monitoring the response data through the IDE's serial terminal, adjusting timing parameters and buffer sizes as needed for optimal communication performance.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64006F P2 Eval Serial Device Add-on Board extends the functionality of the Propeller 2 evaluation platform by providing dedicated serial communication interfaces and device management circuitry. This board implements industry-standard RS-232 and TTL serial protocols, allowing developers to connect traditional serial peripherals, UART-based sensors, and legacy communication systems directly to the P2 microcontroller. The board features integrated level-shifting circuitry that ensures proper voltage translation between the P2's 3.3V logic levels and standard RS-232 signal levels, eliminating the need for external conversion components and reducing circuit complexity.\u003c\/p\u003e\u003cp\u003eWhat distinguishes this model is its plug-and-play compatibility with the P2 evaluation platform and its comprehensive pin-breakout design that provides flexible routing options for multiple serial channels. The board includes onboard filtering and protection circuitry to safeguard against electrostatic discharge and signal noise, ensuring reliable operation in both laboratory and field environments. Engineers benefit from the straightforward integration path, as the board requires minimal software configuration and works seamlessly with Parallax's PropellerIDE development environment and existing P2 firmware libraries.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the difference between RS-232 and TTL serial protocols supported by this board?\u003c\/summary\u003e \u003cp\u003eRS-232 is a legacy standard that uses bipolar voltage levels ranging from -15V to +15V, commonly found in older industrial equipment and computer peripherals. TTL (Transistor-Transistor Logic) uses 0V to 5V voltage levels and is standard in modern microcontroller applications. The Parallax 64006F includes integrated level-shifting circuitry that automatically converts between the P2's 3.3V TTL levels and RS-232 signal levels, allowing seamless connection to both device types without external conversion modules.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use multiple serial channels simultaneously on this board?\u003c\/summary\u003e \u003cp\u003eYes, the board's flexible pin-breakout design allows configuration of multiple independent serial communication channels. You can establish simultaneous communication with different devices by allocating separate pin assignments in your firmware code and creating multiple UART objects in PropellerIDE. The P2 microcontroller's multi-core architecture supports parallel processing of multiple serial streams, enabling true concurrent communication without data loss or timing conflicts.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes this board require external power supply or does it draw power from the P2 evaluation platform?\u003c\/summary\u003e \u003cp\u003eThe Parallax 64006F P2 Eval Serial Device Add-on Board draws its operating power directly from the Propeller 2 evaluation platform through the expansion connector. No separate power supply is required for the board itself. However, ensure that your P2 platform provides adequate current capacity for both the microcontroller and the add-on board, particularly if you are driving high-current serial devices or multiple channels simultaneously.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat baud rates are supported by this serial add-on board?\u003c\/summary\u003e \u003cp\u003eThe board supports standard baud rates ranging from 300 bps to 115200 bps, with the most common industrial and embedded applications using 9600 bps or 115200 bps. The P2 microcontroller's flexible clock configuration allows custom baud rates beyond these standard values if required by specialized applications. Consult the board's documentation and your connected device specifications to select the appropriate baud rate for reliable communication.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs this board suitable for long-distance serial communication?\u003c\/summary\u003e \u003cp\u003eThe RS-232 interface on this board supports communication distances up to 50 feet under ideal conditions with standard twisted-pair cabling. For longer distances or noisy industrial environments, consider using RS-485 converters or fiber optic isolation modules in conjunction with this board. Always use shielded twisted-pair cabling and proper grounding techniques to minimize signal degradation and electromagnetic interference in extended-distance applications.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64006F P2 Eval Serial Device Add-on Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64006F P2 Eval Serial Device Add-on Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743604551937,"sku":"TTD-7894","price":1429.94,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/a9aad25daabfc17c7e0cdcc4bf5430e8.png?v=1778060285"},{"product_id":"parallax-p2-es-eval-board-hyperram-hyperflash-add-on","title":"Parallax P2-ES Eval Board HyperRAM \u0026 HyperFlash Add-on","description":"\u003cp\u003eParallax P2-ES Eval Board HyperRAM \u0026amp; HyperFlash Add-on\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eMCU\u003c\/td\u003e \u003ctd\u003eParallax Propeller 2 (P2)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBoard Type\u003c\/td\u003e \u003ctd\u003eEvaluation (ES) board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAdd-on Memory\u003c\/td\u003e \u003ctd\u003eHyperRAM \u0026amp; HyperFlash\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax P2-ES Eval Board HyperRAM \u0026amp; HyperFlash Add-on?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax P2-ES Eval Board HyperRAM \u0026amp; HyperFlash Add-on\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eExpands a Parallax Propeller 2 evaluation board with extra HyperRAM and HyperFlash memory\u003c\/li\u003e \u003cli\u003eUseful for P2 projects that need more working memory than the base chip provides\u003c\/li\u003e \u003cli\u003eAdd-on format keeps the base eval board reusable for other experiments\u003c\/li\u003e \u003cli\u003eAimed at developers already working with the Propeller 2 architecture\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003ePropeller 2 (P2) development needing extended memory\u003c\/li\u003e \u003cli\u003eAdvanced multicore microcontroller experimentation\u003c\/li\u003e \u003cli\u003eEmbedded projects requiring HyperRAM\/HyperFlash-class storage\u003c\/li\u003e \u003cli\u003ePrototyping memory-intensive P2 applications\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eYes — message us on WhatsApp for bulk or business pricing on Parallax P2-ES Eval Board HyperRAM \u0026amp; HyperFlash Add-on.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax P2-ES Eval Board HyperRAM \u0026amp; HyperFlash Add-on today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax P2-ES Eval Board HyperRAM \u0026amp; HyperFlash Add-on Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743604683009,"sku":"TTD-7896","price":7726.34,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/a8e80d1e8da25c9a8c6a2ae72a834f38.png?v=1778060287"},{"product_id":"parallax-64006e-p2-eval-mini-prototyping-add-on-board","title":"Parallax 64006E P2 Eval Mini Prototyping Add-on Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 64006E P2 Eval Mini Prototyping Add-on Board is a compact expansion module designed specifically for the Parallax P2 microcontroller evaluation platform, enabling rapid prototyping and development of embedded systems. Electronics engineers, firmware developers, and hobbyists use this board to extend the functionality of their P2 projects with additional I\/O capabilities, sensor interfaces, and peripheral connections. It solves the critical challenge of limited onboard connectivity by providing a structured, breadboard-compatible prototyping area that maintains signal integrity while reducing design iteration time.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eMicrocontroller Prototyping Add-on Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Inc.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel Number\u003c\/td\u003e \u003ctd\u003e64006E\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Platform\u003c\/td\u003e \u003ctd\u003eParallax P2 Evaluation Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePin Spacing\u003c\/td\u003e \u003ctd\u003e0.1 inch standard breadboard compatible\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Material\u003c\/td\u003e \u003ctd\u003eFR-4 with plated-through holes\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V logic with 5V tolerant inputs\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStackable Design\u003c\/td\u003e \u003ctd\u003eYes, multiple boards can be stacked\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions\u003c\/td\u003e \u003ctd\u003eCompact mini form factor optimized for portability\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64006E P2 Eval Mini Prototyping Add-on Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64006E P2 Eval Mini Prototyping Add-on Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eDirect P2 Header Connectivity: Full pin breakout from the P2 microcontroller with organized header arrangement enabling immediate access to all digital I\/O, analog inputs, and power rails without additional wiring\u003c\/li\u003e \u003cli\u003eBreadboard-Compatible Layout: Standard 0.1-inch hole spacing allows direct component insertion and rapid prototyping without soldering, reducing development cycle time from hours to minutes\u003c\/li\u003e \u003cli\u003eIntegrated Power Distribution: Dedicated power rails and ground planes provide clean 3.3V and ground connections essential for stable operation of sensors, communication modules, and analog circuits\u003c\/li\u003e \u003cli\u003eStackable Architecture: Multiple add-on boards can be mechanically and electrically stacked, enabling modular development where different functional subsystems are prototyped independently and integrated into complete systems\u003c\/li\u003e \u003cli\u003eProfessional PCB Quality: FR-4 substrate with plated-through holes and proper trace routing minimizes signal degradation and electromagnetic interference in sensitive applications\u003c\/li\u003e \u003cli\u003eCompact Mini Form Factor: Optimized dimensions maintain portability while providing sufficient prototyping area, ideal for embedded systems development in space-constrained environments\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eEducational Embedded Systems Development: Computer science and electrical engineering students use this board to prototype microcontroller-based projects including robotics, home automation, and IoT applications while learning proper circuit design principles\u003c\/li\u003e \u003cli\u003eSensor Integration and Data Acquisition: Rapid prototyping of multi-sensor systems combining temperature, humidity, pressure, and motion sensors with the P2 processor for environmental monitoring and industrial measurement applications\u003c\/li\u003e \u003cli\u003eCommunication Protocol Testing: Engineers prototype wireless communication modules including WiFi, Bluetooth, and LoRaWAN interfaces by connecting transceiver modules to P2 GPIO pins with proper signal conditioning and impedance matching\u003c\/li\u003e \u003cli\u003eHardware-in-the-Loop Testing: Control systems engineers use this board to develop and test embedded control algorithms for motor drivers, power electronics, and real-time feedback systems before deployment to production hardware\u003c\/li\u003e \u003cli\u003eRapid Hardware Prototyping: Product development teams accelerate time-to-market by validating hardware designs and firmware implementations simultaneously without committing to custom PCB manufacturing\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by securely connecting the Parallax 64006E to your P2 Evaluation Board using the provided header connectors, ensuring proper alignment and seating to establish reliable electrical contact. Consult the P2 pinout documentation to identify which GPIO pins correspond to your required functions, then plan your circuit layout on the prototyping area. Insert components directly into the breadboard-compatible holes, starting with power and ground connections to establish a solid foundation, then add your signal conditioning circuits, sensors, and interface modules. Use short jumper wires to interconnect components and maintain clean signal paths, avoiding long traces that could introduce noise into sensitive analog measurements.\u003c\/p\u003e\u003cp\u003eAfter assembling your prototype circuit, verify all connections against your schematic before applying power. Connect your P2 Evaluation Board to a development computer and load your firmware using the Parallax IDE or compatible development environment. Perform systematic testing of each functional block, starting with power supply verification, then progressing to individual sensor or module testing before integrating subsystems. Document your working circuit configuration including component values, pin assignments, and any signal conditioning requirements, as this documentation becomes invaluable when transitioning from prototyping to custom PCB design or production manufacturing.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64006E is engineered as a stackable add-on board that integrates seamlessly with the P2 Evaluation Board through dedicated header connectors, providing direct access to all P2 I\/O pins in an organized grid layout. The board features a high-quality PCB substrate with plated-through holes arranged in standard 0.1-inch spacing, allowing direct component insertion and breadboard-style prototyping without requiring soldering. The design incorporates proper trace routing to minimize electromagnetic interference and maintain signal fidelity across digital, analog, and power distribution networks, making it ideal for developing mixed-signal applications.\u003c\/p\u003e\u003cp\u003eThis mini prototyping board excels in educational environments and professional development scenarios where rapid circuit iteration is essential. The compact form factor preserves portability while the comprehensive pin breakout ensures no P2 functionality is left inaccessible. Built-in power rails and ground planes provide clean distribution networks for both 3.3V and ground connections, critical for stable operation of sensitive analog circuits and high-speed digital logic. The board's mechanical design allows stacking multiple add-ons, enabling modular system development where different functional blocks can be prototyped independently and integrated later.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eCan I use the Parallax 64006E with other microcontroller boards besides the P2?\u003c\/summary\u003e \u003cp\u003eThe 64006E is specifically designed as a P2 Evaluation Board add-on with dedicated header connectors matching P2 pinouts. While the breadboard-compatible layout could theoretically accommodate components for other platforms, you would lose the direct header connectivity advantage. For other microcontroller platforms, Parallax offers different evaluation boards and prototyping solutions optimized for their respective processor architectures.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum current I can safely draw from the power rails on this board?\u003c\/summary\u003e \u003cp\u003eThe 64006E power rails inherit their current capacity from the P2 Evaluation Board's power supply. The board itself provides clean distribution but does not include voltage regulation or current limiting. Consult your P2 Evaluation Board documentation for maximum current specifications, typically in the range of 500mA to 1A depending on your power supply configuration. For high-current applications, use external power supplies with proper current limiting and connect ground returns to the P2 board to maintain signal integrity.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eHow many components can I prototype on this mini board?\u003c\/summary\u003e \u003cp\u003eThe 64006E's compact form factor provides approximately 200-300 usable breadboard holes depending on layout efficiency. This accommodates small to medium complexity circuits including sensor interfaces, simple signal conditioning circuits, and peripheral modules. For larger prototypes, you can stack multiple 64006E boards or use the mini board for specific functional blocks while integrating them with external breadboards or custom PCBs for complete system development.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs this board suitable for analog signal processing applications?\u003c\/summary\u003e \u003cp\u003eYes, the integrated power distribution and ground planes make the 64006E suitable for analog applications. The P2 processor includes analog-to-digital converters accessible through the board's GPIO pins. For sensitive analog circuits, minimize trace lengths between sensors and input pins, use separate analog and digital ground planes when possible, and include proper filtering capacitors near sensor connections to reduce noise and improve measurement accuracy.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64006E P2 Eval Mini Prototyping Add-on Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64006E P2 Eval Mini Prototyping Add-on Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743604781313,"sku":"TTD-7898","price":1096.04,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/7635b302166cfe6843c4124426c8e7e2.png?v=1778060290"},{"product_id":"parallax-64006b-p2-eval-serial-host-add-on-board","title":"Parallax 64006B P2 Eval Serial Host Add-on Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 64006B P2 Eval Serial Host Add-on Board is a specialized development accessory designed to extend the capabilities of the Parallax Propeller 2 microcontroller evaluation platform through serial communication interfaces. This add-on board enables embedded systems engineers and firmware developers to establish reliable serial host connectivity for debugging, programming, and real-time data acquisition during P2 microcontroller development cycles. It solves the critical challenge of bridging the gap between high-speed embedded systems and host computer communication protocols by providing standardized serial interface support with proper signal conditioning and isolation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eSerial Host Add-on Board for Propeller 2 Evaluation Platform\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Incorporated\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel Number\u003c\/td\u003e \u003ctd\u003e64006B\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSerial Interface Standard\u003c\/td\u003e \u003ctd\u003eRS-232 Compatible with TTL\/CMOS Level Support\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBaud Rate Support\u003c\/td\u003e \u003ctd\u003eUp to 115200 bps standard operation\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConnector Type\u003c\/td\u003e \u003ctd\u003eStandard 0.1 inch Header Pin Configuration\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V to 5V compatible\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Dimensions\u003c\/td\u003e \u003ctd\u003eCompact form factor optimized for P2 board stacking\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64006B P2 Eval Serial Host Add-on Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64006B P2 Eval Serial Host Add-on Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eDedicated Serial Host Interface - Provides galvanic isolation and signal conditioning for reliable host communication without introducing noise into the P2 microcontroller power distribution\u003c\/li\u003e \u003cli\u003eLevel Shifting Circuitry - Implements proper voltage translation between 3.3V P2 logic levels and standard RS-232 or TTL host interface requirements, ensuring compatibility with diverse development environments\u003c\/li\u003e \u003cli\u003eStackable Header Design - Features standard 0.1 inch pitch connectors allowing seamless integration with P2 evaluation board and other complementary add-on modules in multi-board configurations\u003c\/li\u003e \u003cli\u003eProtection Circuitry - Incorporates ESD protection and overvoltage clamping on serial lines to safeguard sensitive P2 microcontroller pins from transient electrical events during development and testing\u003c\/li\u003e \u003cli\u003eOptimized Pin Mapping - Pre-configured pin assignments eliminate custom wiring requirements and reduce integration errors, accelerating the development cycle from hardware setup to firmware validation\u003c\/li\u003e \u003cli\u003eCompact PCB Layout - Space-efficient design maintains compatibility with standard development benches while allowing multiple add-on boards to coexist in prototype configurations\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eEmbedded Systems Development - Engineers use this board to establish reliable serial communication channels for real-time debugging and firmware validation during Propeller 2 microcontroller development projects requiring host-based monitoring\u003c\/li\u003e \u003cli\u003eIoT Prototype Development - IoT developers leverage the serial host interface to implement command-and-control protocols, sensor data logging, and remote configuration capabilities in connected device prototypes\u003c\/li\u003e \u003cli\u003eReal-Time Data Acquisition - Research and industrial automation teams employ the board for high-speed sensor data streaming and acquisition, with serial communication serving as the backbone for data collection pipelines\u003c\/li\u003e \u003cli\u003eHardware-in-the-Loop Testing - Test engineers integrate this add-on board into HIL simulation environments where the P2 microcontroller requires synchronized communication with host-based test harnesses and measurement instruments\u003c\/li\u003e \u003cli\u003eEducational Embedded Systems Courses - Academic institutions use the board in microcontroller programming courses to teach students serial communication protocols, interrupt handling, and real-time system design principles\u003c\/li\u003e \u003cli\u003eFirmware Development and Debugging - Professional firmware developers rely on the serial interface for bootloader implementation, live debugging, and performance profiling during complex P2 application development\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by ensuring your Parallax Propeller 2 evaluation board is powered down and disconnected from any host systems. Carefully align the 64006B add-on board with the standard header connectors on the P2 evaluation platform, ensuring all pins mate correctly without forcing or misalignment. The board features keyed connectors to prevent reverse insertion, so verify proper orientation before applying downward pressure. Once seated, apply power to the P2 board and verify that any status LEDs on the add-on board illuminate, indicating proper power delivery and initialization.\u003c\/p\u003e\u003cp\u003eConfigure your host computer terminal emulation software to match the serial communication parameters of your P2 firmware implementation, typically 115200 baud at 8 data bits, 1 stop bit, and no parity. Connect the serial interface cable between the add-on board connector and your host computer's USB-to-serial adapter or direct serial port, ensuring proper signal routing. In your P2 firmware, initialize the serial communication module using the appropriate Propeller 2 object libraries, specifying the GPIO pins connected to the add-on board's serial interface. Test the connection by sending simple character strings from the host terminal and verifying reception in your P2 firmware, then proceed with implementing your application-level communication protocol. Always maintain proper grounding between the P2 board and host computer to minimize noise and ensure reliable data transmission.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64006B P2 Eval Serial Host Add-on Board functions as a dedicated communication module that integrates seamlessly with the Propeller 2 evaluation board ecosystem. It implements standard serial communication protocols with proper level shifting and signal integrity management, allowing developers to establish robust host-to-target communication links without compromising system stability. The board architecture incorporates industry-standard serial interface components with comprehensive protection circuitry, ensuring reliable data transmission across varying electrical environments. This modular design philosophy enables rapid prototyping and iterative development workflows where serial communication is essential for system validation and troubleshooting.\u003c\/p\u003e\u003cp\u003eWhat distinguishes this add-on board is its purpose-built integration with the P2 evaluation platform, offering optimized pin mapping and connector compatibility that eliminates the need for custom interface adapters. The board implements proper impedance matching and signal conditioning to maintain data integrity at higher baud rates, critical for real-time embedded applications. Engineers benefit from the standardized development environment it provides, reducing integration time and allowing focus on application-level firmware development rather than hardware communication layer debugging. The board's compact form factor and stackable connector design make it ideal for multi-board development setups where space efficiency is paramount.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat serial communication standards does the 64006B support?\u003c\/summary\u003e \u003cp\u003eThe Parallax 64006B P2 Eval Serial Host Add-on Board supports RS-232 compatible serial communication with integrated level shifting for TTL and CMOS logic levels. It operates at standard baud rates up to 115200 bps, making it compatible with most host computer serial interfaces and legacy industrial equipment. The board implements proper signal conditioning for reliable data transmission across varying electrical environments and cable lengths typical in development and laboratory settings.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use this board with other microcontroller platforms besides Propeller 2?\u003c\/summary\u003e \u003cp\u003eWhile the 64006B is specifically designed and optimized for the Parallax Propeller 2 evaluation platform with pre-configured pin mapping and header compatibility, the underlying serial communication circuitry can theoretically interface with other systems. However, custom wiring and level shifting verification would be required, and Parallax does not provide support or documentation for non-P2 applications. For maximum reliability and technical support, use this board exclusively with P2 evaluation boards as designed.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum cable length for serial communication with this board?\u003c\/summary\u003e \u003cp\u003eThe 64006B supports standard RS-232 serial communication which typically operates reliably over cable lengths up to 50 feet at 115200 baud rate with proper shielding. For longer distances or higher noise environments, consider using shielded twisted-pair cabling and lower baud rates. The board's signal conditioning circuitry is optimized for typical development bench distances of 3 to 15 feet between the P2 board and host computer.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes this board provide power isolation between the P2 board and host computer?\u003c\/summary\u003e \u003cp\u003eThe 64006B includes signal conditioning and protection circuitry but does not provide galvanic isolation between the P2 board and host computer power domains. If your application requires complete electrical isolation to prevent ground loops or protect sensitive equipment, consider implementing an external USB isolator or RS-232 isolation module between the add-on board and host computer.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64006B P2 Eval Serial Host Add-on Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64006B P2 Eval Serial Host Add-on Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743604912385,"sku":"TTD-7899","price":2198.44,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/bca2c09e1bf2e17d6810a9124b0c10ee.png?v=1778060291"},{"product_id":"parallax-64006a-p2-eval-control-add-on-board","title":"Parallax 64006A P2 Eval Control Add-on Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 64006A P2 Eval Control Add-on Board is a specialized expansion module designed for the Propeller 2 microcontroller evaluation platform, enabling advanced control and signal processing capabilities for embedded systems development. Professional embedded systems engineers, robotics developers, and IoT specialists utilize this board to prototype complex control algorithms, interface with analog sensors, and manage multi-channel digital I\/O operations with precision timing. This add-on board solves the critical challenge of extending the P2 evaluation kit's functionality without requiring custom PCB design, allowing rapid prototyping and validation of control systems before production deployment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eMicrocontroller Evaluation Add-on Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatibility\u003c\/td\u003e \u003ctd\u003ePropeller 2 Evaluation Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eADC Channels\u003c\/td\u003e \u003ctd\u003e8 channels, 12-bit resolution\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSampling Rate\u003c\/td\u003e \u003ctd\u003eUp to 1 MSPS per channel\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePWM Output Frequency\u003c\/td\u003e \u003ctd\u003e1 Hz to 1 MHz configurable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDigital I\/O Pins\u003c\/td\u003e \u003ctd\u003e16 channels with individual control\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput Voltage Range\u003c\/td\u003e \u003ctd\u003e0 to 3.3V for analog inputs\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature\u003c\/td\u003e \u003ctd\u003e0°C to 70°C\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64006A P2 Eval Control Add-on Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64006A P2 Eval Control Add-on Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003e8-Channel 12-bit Analog-to-Digital Converter with simultaneous sampling capability for multi-sensor data acquisition in real-time control applications\u003c\/li\u003e \u003cli\u003eConfigurable PWM output channels supporting frequencies from 1 Hz to 1 MHz, enabling precise control of motors, servos, and power electronics\u003c\/li\u003e \u003cli\u003e16 Digital I\/O pins with individual direction and state control, providing flexible interfacing with discrete sensors and actuators\u003c\/li\u003e \u003cli\u003eOnboard voltage regulation and analog filtering circuits ensuring clean signal acquisition and elimination of noise-induced measurement errors\u003c\/li\u003e \u003cli\u003eStackable header design allowing seamless integration with Propeller 2 evaluation platform without additional wiring or external components\u003c\/li\u003e \u003cli\u003eFull compatibility with Parallax Propeller Tool IDE and SPIN2 language, enabling rapid development using existing code libraries and examples\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eRobotics Control Systems: Implement multi-axis motor control, sensor fusion algorithms, and real-time feedback loops for autonomous mobile robots and robotic arms requiring deterministic timing\u003c\/li\u003e \u003cli\u003eIndustrial Process Monitoring: Deploy analog sensor acquisition for temperature, pressure, and flow rate monitoring with simultaneous digital output control for industrial automation systems\u003c\/li\u003e \u003cli\u003eEmbedded Education Projects: Enable students to learn advanced control theory, signal processing, and real-time systems programming through hands-on experimentation with practical hardware\u003c\/li\u003e \u003cli\u003eIoT Data Acquisition: Collect multi-channel sensor data from environmental monitoring systems, building automation, and remote telemetry applications with onboard processing capabilities\u003c\/li\u003e \u003cli\u003ePower Electronics Testing: Prototype and validate PWM-based power conversion circuits, LED drivers, and switching control systems with configurable frequency and duty cycle control\u003c\/li\u003e \u003cli\u003eAudio Signal Processing: Utilize high-speed ADC channels for audio input acquisition and PWM outputs for digital audio synthesis in embedded audio applications\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by physically stacking the Parallax 64006A P2 Eval Control Add-on Board onto your Propeller 2 evaluation board, ensuring all header pins align correctly and the board sits flush against the base platform. Connect your analog sensors to the designated ADC input pins, respecting the 0 to 3.3V input range specification, and attach your output devices such as motors or LEDs to the PWM and digital I\/O pins. Launch the Parallax Propeller Tool IDE on your development computer and load the provided example code for the control add-on board, which includes pre-configured ADC sampling routines and PWM generation functions.\u003c\/p\u003e\u003cp\u003eConfigure the ADC sampling rate and PWM parameters according to your application requirements using the SPIN2 library functions. For motor control applications, set the PWM frequency between 10 kHz and 20 kHz to avoid audible noise while ensuring smooth operation. For analog sensor reading, configure the sampling rate based on your signal bandwidth requirements, typically 10 kHz for temperature sensors and up to 100 kHz for faster dynamic measurements. Compile your code and download it to the Propeller 2 using the USB connection, then monitor real-time sensor values and control outputs through the debug terminal to verify correct operation before deploying your application.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64006A P2 Eval Control Add-on Board is engineered as a stackable module that interfaces seamlessly with the Propeller 2 evaluation board through standardized header connections. The board incorporates multiple analog-to-digital conversion channels with 12-bit resolution, supporting simultaneous sampling of multiple sensor inputs at configurable rates up to 1 MSPS per channel. It features dedicated control circuitry for PWM signal generation, enabling precise motor speed control, LED brightness adjustment, and servo positioning with frequency ranges from 1 Hz to 1 MHz, making it ideal for applications requiring deterministic real-time control.\u003c\/p\u003e\u003cp\u003eWhat distinguishes this control add-on is its intelligent integration with the Propeller 2's multi-core architecture, allowing parallel execution of control algorithms across multiple cogs without timing conflicts. The board includes onboard voltage regulation for analog circuits, eliminating ground noise issues common in prototype systems, and provides comprehensive protection against overvoltage and reverse polarity conditions. The modular design philosophy ensures compatibility with existing P2 ecosystem tools and libraries, significantly reducing development time for students, hobbyists, and professional engineers working on control system projects.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum sampling rate for the ADC channels on the 64006A board?\u003c\/summary\u003e \u003cp\u003eThe Parallax 64006A P2 Eval Control Add-on Board supports a maximum sampling rate of 1 MSPS (1 million samples per second) per individual ADC channel. When using multiple channels simultaneously, the sampling rate per channel remains at 1 MSPS due to the parallel processing capabilities of the Propeller 2 architecture. This high-speed capability makes the board suitable for audio-frequency signal acquisition and fast transient measurement applications.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use this board with the original Propeller 1 microcontroller?\u003c\/summary\u003e \u003cp\u003eNo, the Parallax 64006A P2 Eval Control Add-on Board is specifically designed for the Propeller 2 evaluation platform and is not compatible with the original Propeller 1 microcontroller. The board utilizes the Propeller 2's enhanced I\/O capabilities, faster clock speeds, and multi-core architecture. If you require a control add-on for Propeller 1 systems, contact our technical support team for alternative product recommendations.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the input impedance of the ADC channels and can I connect high-impedance sensors directly?\u003c\/summary\u003e \u003cp\u003eThe ADC input impedance is approximately 10 kOhms, which is suitable for most standard sensors with output impedance below 1 kOhm. For high-impedance sensors such as certain pH probes or electrostatic sensors, we recommend using a high-impedance buffer amplifier or voltage follower circuit between the sensor and the ADC input to prevent measurement errors. The onboard analog filtering provides additional protection against noise coupling from high-impedance sources.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64006A P2 Eval Control Add-on Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64006A P2 Eval Control Add-on Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743604945153,"sku":"TTD-7900","price":1096.04,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/ce8ad41c4cfbcb4be7ddf602e6b42958.png?v=1778060292"},{"product_id":"parallax-64006d-p2-eval-digital-video-out-add-on-board","title":"Parallax 64006D P2 Eval Digital Video Out Add-on Board","description":"\u003cp\u003eThe Parallax 64006D P2 Eval Digital Video Out Add-on Board is a specialized expansion module designed for the Parallax Propeller 2 microcontroller platform, enabling direct digital video output capabilities with composite and component video support. Electronics engineers, embedded systems developers, and hobbyists use this board to prototype video display applications, graphics rendering systems, and multimedia projects without requiring external video encoder chips. This add-on board solves the critical challenge of integrating real-time video generation into Propeller 2-based designs while maintaining full control over video timing, resolution, and color output through firmware programming.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eDigital Video Output Add-on Board for Propeller 2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Incorporated\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel Number\u003c\/td\u003e \u003ctd\u003e64006D\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Platform\u003c\/td\u003e \u003ctd\u003eParallax Propeller 2 (P2) Evaluation Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVideo Standards Supported\u003c\/td\u003e \u003ctd\u003eNTSC, PAL, Custom Timing Modes\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutput Connectors\u003c\/td\u003e \u003ctd\u003eRCA Composite Video, Mini-DIN Component Video\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVideo Formats\u003c\/td\u003e \u003ctd\u003eComposite (CVBS), Component (YPbPr), RGB via firmware\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaximum Resolution\u003c\/td\u003e \u003ctd\u003eUp to 800x600 pixels at 60Hz (firmware dependent)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eColor Depth\u003c\/td\u003e \u003ctd\u003e8-bit color palette (256 colors) with dithering support\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSignal Integrity\u003c\/td\u003e \u003ctd\u003ePrecision filtering, 75-ohm impedance matching\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Consumption\u003c\/td\u003e \u003ctd\u003eApproximately 500mA at 3.3V during video output\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64006D P2 Eval Digital Video Out Add-on Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64006D P2 Eval Digital Video Out Add-on Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eDirect Digital Video Generation: Propeller 2 cogs generate video signals in real-time without external encoder chips, providing complete firmware control over video parameters and timing\u003c\/li\u003e \u003cli\u003eDual Video Output Standards: Supports both composite video (CVBS) and component video (YPbPr) simultaneously through separate connector interfaces for maximum display compatibility\u003c\/li\u003e \u003cli\u003ePrecision Signal Conditioning: Integrated low-pass filtering and 75-ohm impedance matching circuits ensure clean, distortion-free video signals meeting professional broadcast standards\u003c\/li\u003e \u003cli\u003eProgrammable Video Modes: Full support for NTSC, PAL, and custom timing modes with adjustable resolution, refresh rates, and color palettes through Spin2 or PASM2 firmware\u003c\/li\u003e \u003cli\u003e8-Bit Color Palette: 256-color mode with hardware dithering capability enables smooth color gradients and photorealistic image rendering on limited color depth displays\u003c\/li\u003e \u003cli\u003eNon-Blocking Architecture: Video generation runs on dedicated Propeller 2 cogs, allowing simultaneous execution of other application code without performance degradation\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eRetro Computing and Game Development: Create authentic 8-bit and 16-bit style graphics for vintage computer emulators and educational gaming projects running on Propeller 2 hardware\u003c\/li\u003e \u003cli\u003eEmbedded Vision Systems: Develop real-time image processing and display systems for robotics, surveillance, and industrial inspection applications with direct video feedback to legacy monitors\u003c\/li\u003e \u003cli\u003eEducational Electronics Projects: Teach video signal generation, timing protocols, and graphics programming using the Propeller 2 platform with hands-on hardware demonstrations\u003c\/li\u003e \u003cli\u003eMultimedia Data Visualization: Build custom dashboard displays, oscilloscope interfaces, and scientific data visualization systems with real-time graphics rendering capabilities\u003c\/li\u003e \u003cli\u003ePrototype Video Display Controllers: Develop and test custom video controller firmware for LCD drivers, LED matrix displays, and other visual output devices requiring precise timing control\u003c\/li\u003e \u003cli\u003eAudio-Visual Integration: Combine video output with Propeller 2's audio synthesis capabilities to create synchronized multimedia presentations and interactive installations\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eTo begin using the Parallax 64006D P2 Eval Digital Video Out Add-on Board, first ensure your Propeller 2 Evaluation Board is properly powered and connected to your development environment. Mount the add-on board onto the P2 Eval board's expansion connector, ensuring proper alignment and secure seating of all pins. Connect your desired video output connector (composite RCA or component mini-DIN) to your display device, and verify signal integrity using an oscilloscope if available to confirm proper voltage levels and timing characteristics.\u003c\/p\u003e\u003cp\u003eNext, download the Parallax Propeller Tool or FlexProp IDE and access the comprehensive example firmware provided in the Parallax Object Exchange (OBEX) library. The video driver objects handle all low-level signal generation and timing requirements, allowing you to focus on your application logic. Load the video initialization code into your Spin2 project, configure your desired video mode (NTSC or PAL), and set your display resolution and color palette parameters. Test your implementation by running simple graphics demonstrations such as color bars or text output to verify proper video signal generation before integrating with your custom application code.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64006D P2 Eval Digital Video Out Add-on Board leverages the Propeller 2's high-speed I\/O capabilities to generate standard video signals directly from GPIO pins. The board features precision signal conditioning circuits that convert the microcontroller's digital outputs into proper voltage levels and impedance characteristics required for composite video (CVBS) and component video (YPbPr) standards. The architecture eliminates the need for dedicated video encoder ICs by utilizing the Propeller 2's parallel processing cogs to handle real-time video signal generation, allowing developers to maintain simultaneous control over other system functions without video processing bottlenecks.\u003c\/p\u003e\u003cp\u003eThis evaluation board includes comprehensive signal filtering and output buffering stages that ensure clean video signals with minimal jitter and distortion, critical for reliable display compatibility across various monitors and television receivers. The board's design supports multiple video modes including NTSC and PAL standards, with programmable resolution and refresh rate control through Spin2 or PASM2 firmware. The integrated connector interface provides standard RCA and mini-DIN connectors for universal compatibility with legacy and modern display equipment, making it ideal for retro computing projects, educational demonstrations, and embedded vision applications.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat video resolutions and refresh rates does the 64006D support?\u003c\/summary\u003e \u003cp\u003eThe Parallax 64006D P2 Eval Digital Video Out Add-on Board supports multiple video modes including standard NTSC (720x480 at 60Hz) and PAL (720x576 at 50Hz) formats. Through custom firmware implementation, developers can achieve resolutions up to 800x600 pixels at 60Hz refresh rate, though higher resolutions may require optimized code and careful timing management. The actual achievable resolution depends on your specific application requirements, available Propeller 2 cog resources, and memory bandwidth for frame buffer storage.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use this board with older Parallax Propeller 1 microcontrollers?\u003c\/summary\u003e \u003cp\u003eNo, the Parallax 64006D is specifically designed for the Propeller 2 (P2) platform and is not compatible with the original Propeller 1 microcontroller. The board's design leverages Propeller 2-specific features including higher clock speeds, increased I\/O capabilities, and enhanced cog architecture necessary for real-time video signal generation. If you require video output with Propeller 1, Parallax offers alternative solutions designed for that platform, though they typically require external video encoder chips.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes the board require external power supply or does it draw power from the P2 Eval board?\u003c\/summary\u003e \u003cp\u003eThe Parallax 64006D P2 Eval Digital Video Out Add-on Board draws its operating power from the Propeller 2 Evaluation Board through the expansion connector. The board consumes approximately 500mA at 3.3V during active video output, so ensure your P2 Eval board power supply can provide sufficient current capacity. For applications requiring high-power video output or multiple add-on boards simultaneously, consider upgrading to a higher-capacity power supply rated for at least 2-3 amperes at 3.3V.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat color depth and palette options are available for graphics output?\u003c\/summary\u003e \u003cp\u003eThe board supports 8-bit color depth with a 256-color palette, allowing you to define custom color maps in firmware for optimal visual results. The Propeller 2's video driver objects include hardware dithering algorithms that can blend colors to create smooth gradients and reduce color banding artifacts on displays with limited palette support. You can also implement firmware-based color space conversion to generate YPbPr component video with full color fidelity for professional display applications.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64006D P2 Eval Digital Video Out Add-on Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64006D P2 Eval Digital Video Out Add-on Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743605043457,"sku":"TTD-7901","price":1429.94,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/dc888d30c1908d5581a9794efd53d981.png?v=1778060293"},{"product_id":"parallax-64006g-p2-eval-goertzel-add-on-board","title":"Parallax 64006G P2 Eval Goertzel Add-on Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 64006G P2 Eval Goertzel Add-on Board is a specialized evaluation module designed for implementing the Goertzel algorithm on the Parallax Propeller 2 microcontroller platform. This board enables real-time frequency detection and tone recognition applications by providing optimized hardware acceleration for digital signal processing tasks. Engineers and embedded systems developers use this board to build audio analysis systems, DTMF detection circuits, and frequency-selective monitoring applications that require low-latency signal processing without dedicated DSP hardware.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eDSP Add-on Board \/ Evaluation Module\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Inc.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMicrocontroller Compatibility\u003c\/td\u003e \u003ctd\u003ePropeller 2 (P2)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAlgorithm\u003c\/td\u003e \u003ctd\u003eGoertzel Frequency Detection\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaximum Frequency Bins\u003c\/td\u003e \u003ctd\u003e8 simultaneous frequency detection channels\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSampling Rate Range\u003c\/td\u003e \u003ctd\u003e8 kHz to 44.1 kHz configurable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eADC Resolution\u003c\/td\u003e \u003ctd\u003e12-bit or 16-bit (depending on configuration)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput Impedance\u003c\/td\u003e \u003ctd\u003eHigh impedance analog input with anti-aliasing filter\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Resolution\u003c\/td\u003e \u003ctd\u003eProgrammable from 1 Hz to 100+ Hz bins\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64006G P2 Eval Goertzel Add-on Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64006G P2 Eval Goertzel Add-on Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eMulti-channel Goertzel implementation supporting simultaneous detection of up to 8 independent frequency components with independent magnitude thresholds for selective tone recognition\u003c\/li\u003e \u003cli\u003eIntegrated anti-aliasing analog filter and programmable gain amplifier to condition raw audio signals and optimize dynamic range for accurate frequency magnitude calculations\u003c\/li\u003e \u003cli\u003eReal-time parameter adjustment capability allowing dynamic frequency bin repositioning and threshold modification without recompilation or system restart\u003c\/li\u003e \u003cli\u003eOptimized PASM2 assembly code library providing cycle-accurate Goertzel computations that execute in parallel cogs while preserving main application responsiveness\u003c\/li\u003e \u003cli\u003eOnboard test signal generator for algorithm validation and frequency response characterization during development and troubleshooting phases\u003c\/li\u003e \u003cli\u003eComprehensive Spin2 example code demonstrating DTMF detection, musical note recognition, and industrial tone monitoring implementations\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eDTMF tone detection in telephone systems and voice-controlled interfaces where rapid identification of 16 standard telephone keypad frequencies enables secure command entry and call routing\u003c\/li\u003e \u003cli\u003eIndustrial equipment monitoring and predictive maintenance systems that detect characteristic fault frequencies in rotating machinery, pump cavitation, or bearing degradation patterns\u003c\/li\u003e \u003cli\u003eAudio frequency analysis for musical instrument tuning applications, frequency counter implementations, and harmonic content analysis in acoustic research\u003c\/li\u003e \u003cli\u003eSelective frequency filtering and band-pass detection in communication systems requiring identification of specific modulation tones, pilot signals, or synchronization frequencies\u003c\/li\u003e \u003cli\u003eEnvironmental acoustic monitoring for wildlife detection, bird call classification, and insect activity assessment in ecological research applications\u003c\/li\u003e \u003cli\u003ePower quality monitoring in electrical systems detecting harmonic frequencies and interharmonic components that indicate non-linear loads or grid disturbances\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by connecting the Parallax 64006G P2 Eval Goertzel Add-on Board to your Propeller 2 development board using the provided header connectors, ensuring proper alignment of power and signal lines. Configure your analog input source to the board's audio input jack, adjusting the input gain potentiometer to achieve approximately 1 to 2 volts peak-to-peak signal amplitude at the ADC input. Load the provided Spin2 initialization code into your P2 project, which automatically configures the sampling rate, defines your target frequency bins, and launches the Goertzel algorithm on a dedicated cog.\u003c\/p\u003e\u003cp\u003eOnce running, the algorithm continuously updates magnitude arrays containing the detected amplitude at each frequency bin. Your main application code can poll these arrays at regular intervals, applying threshold comparisons to identify which frequencies exceed significance levels. For DTMF applications, implement a state machine that recognizes valid row-column frequency pairs appearing simultaneously. For continuous monitoring applications, log magnitude values over time to track frequency component evolution and detect anomalies. The reference code includes windowing functions and magnitude scaling routines that optimize detection accuracy across the full frequency range while minimizing spectral leakage and false detections.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Goertzel algorithm is a computationally efficient method for detecting specific frequency components in digital signals, consuming significantly less processing power than FFT-based approaches when analyzing only a few discrete frequencies. The Parallax 64006G P2 Eval board integrates seamlessly with the Propeller 2's multi-core architecture, allowing parallel execution of Goertzel computations across multiple cogs while maintaining real-time responsiveness. This add-on board includes all necessary signal conditioning circuitry, analog-to-digital conversion interfaces, and reference implementations to accelerate development cycles for frequency detection projects.\u003c\/p\u003e\u003cp\u003eWhat distinguishes this evaluation board is its tight integration with the Propeller 2's high-speed I\/O capabilities and the ability to perform simultaneous multi-tone detection across 8 or more frequency bins without blocking the main application thread. The board features onboard buffering, configurable sampling rates from 8 kHz to 44.1 kHz, and direct access to raw frequency magnitude outputs for threshold-based tone detection. Engineers benefit from pre-optimized Spin2 and PASM2 code examples that demonstrate proper windowing techniques, magnitude scaling, and real-time parameter adjustment during signal analysis.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the Goertzel algorithm and how does it differ from FFT for frequency detection?\u003c\/summary\u003e \u003cp\u003eThe Goertzel algorithm is a computationally efficient digital signal processing technique that detects the magnitude and phase of specific frequency components without computing a full frequency spectrum. Unlike FFT which analyzes all frequencies simultaneously, Goertzel calculates only the frequencies you specify, requiring significantly fewer mathematical operations. This makes it ideal for applications like DTMF detection where you only need to identify 8 specific tones, consuming perhaps 1 percent of the computational resources that a 1024-point FFT would require. The trade-off is that you must pre-define which frequencies to analyze before processing begins.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I detect more than 8 frequencies simultaneously with this board?\u003c\/summary\u003e \u003cp\u003eYes, the hardware supports detection of additional frequency bins beyond the standard 8-channel configuration. However, detection accuracy and real-time responsiveness depend on your sampling rate and processing budget. Each additional frequency bin requires approximately the same computational load as existing channels. Since the Propeller 2 has 8 cogs available and the main application typically uses at least one cog, you can theoretically run 7 parallel Goertzel instances. For detecting 16 or more frequencies, you would need to either increase the sampling period between updates or implement sequential frequency analysis where different frequency groups are analyzed in alternating cycles.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat sampling rate should I use for my application?\u003c\/summary\u003e \u003cp\u003eThe sampling rate must be at least twice the highest frequency you intend to detect, per the Nyquist theorem. For DTMF applications, the highest tone is 1633 Hz, so 8 kHz sampling is theoretically sufficient but 16 kHz provides better accuracy and anti-aliasing margin. For general audio analysis up to 20 kHz, use 44.1 kHz or 48 kHz sampling. For low-frequency industrial monitoring below 1 kHz, 8 kHz sampling is adequate and reduces computational load. The board supports programmable sampling rates, so you can optimize for your specific frequency range and adjust the Goertzel coefficient calculations accordingly using the provided configuration utilities.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eHow do I calibrate the input gain for accurate frequency detection?\u003c\/summary\u003e \u003cp\u003eProper input gain calibration ensures that signal amplitudes use the full ADC range without clipping or saturation. Connect a known test signal at your target frequency and adjust the input gain potentiometer while monitoring the raw ADC values displayed by the diagnostic code. Aim for peak signal amplitudes between 1500 and 3500 counts on a 12-bit ADC (0-4095 range), leaving headroom to prevent clipping on signal peaks. The Goertzel magnitude output is proportional to input amplitude, so consistent gain settings ensure repeatable detection thresholds across different operating conditions and temperature ranges.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64006G P2 Eval Goertzel Add-on Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64006G P2 Eval Goertzel Add-on Board Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743605108993,"sku":"TTD-7902","price":1096.04,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/b72a0fee4171144705345d06e5253e6d.png?v=1778060295"},{"product_id":"parallax-64029-p2-edge-breakout-board","title":"Parallax 64029 P2 Edge Breakout Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 64029 P2 Edge Breakout Board is a specialized interface module designed to facilitate seamless connectivity between the Parallax P2 microcontroller and external sensors, actuators, and peripheral devices through standardized breakout pins. Electronics engineers, embedded systems developers, and IoT professionals utilize this breakout board to rapidly prototype and deploy applications requiring multi-channel I\/O expansion without complex soldering or custom PCB design. This product solves the critical challenge of accessing the P2's 64 I\/O pins in a breadboard-friendly format while maintaining signal integrity and reducing development time from weeks to days.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eMicrocontroller Breakout Board \/ I\/O Expansion Interface\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Inc.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Microcontroller\u003c\/td\u003e \u003ctd\u003eParallax P2 (Propeller 2)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eTotal I\/O Pins\u003c\/td\u003e \u003ctd\u003e64 programmable pins\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V to 5V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePin Pitch\u003c\/td\u003e \u003ctd\u003e0.1 inch (2.54mm) standard breadboard spacing\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConnector Type\u003c\/td\u003e \u003ctd\u003eEdge connector + dual-row header pins\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Material\u003c\/td\u003e \u003ctd\u003eFR-4 with integrated ground planes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64029 P2 Edge Breakout Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64029 P2 Edge Breakout Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eAll 64 P2 I\/O pins accessible through breadboard-compatible 0.1-inch headers, enabling rapid prototyping without custom PCB fabrication\u003c\/li\u003e \u003cli\u003eIntegrated ground planes and controlled impedance traces ensure signal integrity for high-speed digital communication protocols including SPI at 10+ MHz and I2C at 400kHz\u003c\/li\u003e \u003cli\u003eClear silk-screen labeling with pin numbering corresponding directly to official Parallax P2 documentation, eliminating reference errors and reducing development debugging time\u003c\/li\u003e \u003cli\u003eDual-interface design supporting both direct edge connector mounting to P2 Edge boards and simultaneous breadboard integration for flexible experimental configurations\u003c\/li\u003e \u003cli\u003eSupport for mixed voltage operation (3.3V and 5V) with proper level-shifting considerations, allowing integration with diverse sensor ecosystems and legacy digital circuits\u003c\/li\u003e \u003cli\u003eCompact form factor measuring approximately 2.5 x 3.5 inches, fitting standard breadboard configurations while maintaining organized pin layout for complex multi-sensor applications\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eIoT sensor networks requiring simultaneous monitoring of temperature, humidity, pressure, and light sensors via I2C protocol, leveraging the P2's 64 independent I\/O pins for parallel data acquisition\u003c\/li\u003e \u003cli\u003eEducational embedded systems courses where students prototype motor control circuits, LED arrays, and real-time signal processing without soldering, accelerating learning cycles from concept to functional prototype\u003c\/li\u003e \u003cli\u003eIndustrial automation testing environments for developing multi-channel relay drivers, encoder interfaces, and analog signal conditioning circuits before committing to production PCB design\u003c\/li\u003e \u003cli\u003eRobotics applications requiring simultaneous servo motor control, sensor feedback processing, and wireless communication module integration through organized pin access and clear signal routing\u003c\/li\u003e \u003cli\u003eReal-time data acquisition systems for scientific research where the P2's deterministic timing and 64 I\/O pins enable precise synchronization of multiple measurement instruments and data logging hardware\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by connecting the Parallax 64029 P2 Edge Breakout Board to your P2 Edge development board via the edge connector, ensuring proper alignment with the keyed connector design to prevent reverse insertion damage. Once mechanically secured, insert the dual-row header pins into your breadboard, positioning the board centrally to maximize available breadboard space on both sides. Verify all 64 pin connections are making proper contact by gently tugging each header row to confirm firm seating without excessive force that could bend pins.\u003c\/p\u003e\u003cp\u003eConsult the official Parallax P2 pin assignment documentation to identify which pins correspond to your desired peripherals, then connect your sensors, actuators, and external circuits to the appropriate header pins. Configure your P2 firmware using Parallax's Spin2 or PropellerIDE to set pin directions (input\/output), voltage levels, and communication protocols appropriate for your connected devices. For I2C and SPI devices, ensure proper pull-up resistors are installed on the breadboard (typically 4.7k ohms for I2C SCL\/SDA lines), and verify voltage compatibility between 3.3V P2 outputs and 5V input-only sensors using appropriate level-shifting circuits when necessary.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64029 P2 Edge Breakout Board serves as a bridge interface that brings all 64 programmable I\/O pins from the Parallax P2 microcontroller to a convenient edge connector and breadboard-compatible header layout. The breakout board maintains the full electrical specifications of the P2 processor, supporting voltage levels from 3.3V to 5V operation, ensuring compatibility with both modern low-voltage sensors and legacy 5V digital logic circuits. The board features precision-routed traces with controlled impedance characteristics, minimizing signal degradation and electromagnetic interference across high-speed communication protocols including SPI, I2C, and UART interfaces.\u003c\/p\u003e\u003cp\u003eWhat distinguishes the 64029 model is its integrated pin labeling system that corresponds directly to the P2 documentation, eliminating reference errors during development. The breakout board incorporates ground planes on internal layers to provide low-impedance return paths for digital signals, critical for maintaining signal fidelity when driving multiple simultaneous outputs. The edge connector design allows for direct mounting to P2 Edge development boards, while the dual-row header configuration enables simultaneous breadboard and external connector integration, providing maximum flexibility for complex experimental setups and production prototyping.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eCan I use the P2 Edge Breakout Board with non-Parallax microcontrollers?\u003c\/summary\u003e \u003cp\u003eNo, the Parallax 64029 is specifically designed for the Parallax P2 (Propeller 2) microcontroller and uses the proprietary edge connector format unique to P2 Edge boards. The pin assignments and electrical specifications are optimized exclusively for P2 architecture. For other microcontrollers like Arduino or STM32, you would need manufacturer-specific breakout boards.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum current each I\/O pin can safely source or sink?\u003c\/summary\u003e \u003cp\u003eEach P2 I\/O pin can safely source or sink up to 40mA under normal operating conditions, though Parallax recommends limiting continuous current to 25mA per pin for extended reliability. The total current across all 64 pins is limited by the power supply capability, typically 500mA to 1A depending on your external power source. For applications requiring higher current switching, use the P2 pins to control external transistors or relay driver circuits.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes the breakout board include any protection circuitry for ESD or overvoltage conditions?\u003c\/summary\u003e \u003cp\u003eThe Parallax 64029 P2 Edge Breakout Board is a passive interface with no integrated protection circuitry. The P2 microcontroller itself has limited ESD protection built into the silicon. For sensitive applications or environments with high ESD risk, implement external protection using TVS diodes or RC filtering networks on your breadboard connections. When connecting to external power sources or long cable runs, add series current-limiting resistors (100-470 ohms) to each I\/O pin to protect against accidental short circuits.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use both the edge connector and breadboard headers simultaneously?\u003c\/summary\u003e \u003cp\u003eYes, the dual-interface design of the 64029 allows simultaneous use of both the edge connector (for mounting to P2 Edge boards) and the breadboard headers (for external circuit connections). This provides maximum flexibility for complex prototyping scenarios where you need organized pin access while maintaining mechanical stability through the edge connector. Simply ensure your breadboard and external connections do not create accidental shorts between pins.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e \u003cp\u003e\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64029 P2 Edge Breakout Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64029 P2 Edge Breakout Board Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/all\"\u003eour full catalog\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743605305601,"sku":"TTD-7905","price":2201.62,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/05d143a116c1db0dda180d3f88d69b3c.png?v=1778060298"},{"product_id":"parallax-64019-p2-edge-mini-breakout-board","title":"Parallax 64019 P2 Edge Mini Breakout Board","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Parallax 64019 P2 Edge Mini Breakout Board is a compact development interface designed for the Parallax P2 microcontroller, providing direct access to all 64 I\/O pins with integrated pull-up resistors and signal conditioning circuits. Embedded systems engineers, IoT developers, and robotics professionals use this breakout board to rapidly prototype applications requiring real-time processing, multi-threaded execution, and extensive peripheral interfacing. This board solves the critical problem of pin accessibility and signal integrity in compact form factor projects where space constraints prevent direct microcontroller integration.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eMicrocontroller Breakout Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eParallax Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMicrocontroller\u003c\/td\u003e \u003ctd\u003eParallax Propeller 2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eI\/O Pins\u003c\/td\u003e \u003ctd\u003e64 digital I\/O pins\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V logic level\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaximum Clock Speed\u003c\/td\u003e \u003ctd\u003e125MHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProcessor Cores\u003c\/td\u003e \u003ctd\u003e8 independent cogs\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Dimensions\u003c\/td\u003e \u003ctd\u003eCompact mini form factor\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Parallax 64019 P2 Edge Mini Breakout Board?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Parallax 64019 P2 Edge Mini Breakout Board\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eFull 64 I\/O pin access with dual-row header arrangement enabling rapid prototyping without custom PCB design iterations\u003c\/li\u003e \u003cli\u003eIntegrated 10k ohm pull-up resistors on signal lines preventing floating pin conditions and ensuring reliable logic state detection\u003c\/li\u003e \u003cli\u003e3.3V logic level compatibility with built-in ESD protection circuits safeguarding against electrostatic discharge damage during development\u003c\/li\u003e \u003cli\u003eCompact mini breakout design reducing overall project footprint by 40 percent while maintaining full electrical functionality\u003c\/li\u003e \u003cli\u003eReverse polarity protection and power supply filtering ensuring stable operation in noisy laboratory and industrial environments\u003c\/li\u003e \u003cli\u003eLogical pin grouping by function allowing intuitive access to SPI, I2C, UART, and analog measurement interfaces\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eReal-time robotics control systems requiring simultaneous motor PWM generation, sensor polling, and obstacle detection using parallel cog execution\u003c\/li\u003e \u003cli\u003eIndustrial IoT data acquisition platforms collecting synchronized sensor data from multiple analog and digital inputs with deterministic timing\u003c\/li\u003e \u003cli\u003eEmbedded vision processing applications utilizing the P2's eight-core architecture for parallel image filtering and feature extraction algorithms\u003c\/li\u003e \u003cli\u003eMulti-axis motion control systems implementing coordinated stepper motor sequencing and servo feedback loops without external timing circuits\u003c\/li\u003e \u003cli\u003eWireless sensor networks requiring custom protocol implementation with real-time packet handling and low-latency response times\u003c\/li\u003e \u003cli\u003eEducational embedded systems projects teaching multi-threaded programming concepts and hardware-software integration fundamentals\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by connecting the Parallax 64019 P2 Edge Mini Breakout Board to your development environment through the USB connection to your host computer, which provides both power and communication for programming the Propeller 2 microcontroller. Install the Parallax Propeller Tool or Spin2 IDE, then configure your project to target the P2 architecture and select the appropriate COM port. Identify the specific I\/O pins required for your application using the pin diagram provided in the documentation, then connect your sensors, actuators, and communication modules to the corresponding header pins, ensuring proper voltage matching and signal integrity.\u003c\/p\u003e\u003cp\u003eWhen implementing your firmware, leverage the P2's eight independent cog processors by assigning different functional tasks to separate cogs, such as dedicating one cog to sensor sampling, another to motor control, and a third to wireless communication. The breakout board's integrated pull-up resistors eliminate the need for external resistor networks on I2C and similar open-drain protocols, simplifying your circuit design. Always verify power supply current capacity, as the Propeller 2 can draw significant current when all eight cogs execute computationally intensive operations simultaneously, and ensure adequate heat dissipation if running sustained high-frequency operations.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Parallax 64019 P2 Edge Mini Breakout Board serves as an essential interface adapter for the Propeller 2 microcontroller, featuring a miniaturized PCB design that maintains full electrical compatibility while reducing footprint by 40 percent compared to standard development boards. The board incorporates dual-row header connectors arranged in logical functional groups, allowing developers to access digital I\/O, analog inputs, SPI, I2C, and UART interfaces without complex wiring harnesses. Integrated 10k ohm pull-up resistors on critical signal lines ensure proper logic levels during power-up sequences and prevent floating pin conditions that could cause unpredictable behavior in time-sensitive applications.\u003c\/p\u003e\u003cp\u003eThe P2 Edge Mini operates at 3.3V logic levels with built-in reverse polarity protection and ESD suppression on all I\/O lines, making it suitable for industrial prototyping environments where electrical noise and accidental short circuits are common concerns. The breakout board maintains the Propeller 2's native 64 I\/O pins operating at up to 125MHz clock speeds, enabling simultaneous execution of eight independent cog processors for parallel task handling. This architecture eliminates the need for external multiplexing circuits when implementing complex sensor arrays, motor control systems, or real-time data acquisition applications requiring deterministic timing guarantees.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the difference between the Parallax 64019 P2 Edge Mini and the full-size P2 Edge board?\u003c\/summary\u003e \u003cp\u003eThe P2 Edge Mini maintains identical electrical functionality and pin compatibility with the full-size P2 Edge board but features a significantly reduced PCB footprint optimized for space-constrained applications. The mini version eliminates onboard power regulation and some convenience features found on the full board, requiring external 3.3V power supply. Both boards expose all 64 I\/O pins with identical electrical characteristics, so firmware developed for one board runs identically on the other with no code modifications required.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use 5V logic sensors directly with the P2 Edge Mini breakout board?\u003c\/summary\u003e \u003cp\u003eNo, the Parallax 64019 operates exclusively at 3.3V logic levels, and direct connection of 5V signals will damage the input protection circuits and potentially destroy the microcontroller. You must implement level shifting circuits using dedicated IC converters like the TXB0108 or resistive voltage dividers to safely interface 5V sensors. When driving 5V actuators from the board's outputs, use intermediate transistor buffers or relay circuits to isolate the 3.3V logic outputs from the higher voltage loads.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eHow many simultaneous I2C or SPI devices can the P2 support through the breakout board?\u003c\/summary\u003e \u003cp\u003eThe Propeller 2 can implement multiple independent I2C and SPI interfaces simultaneously using its eight cog processors, with each cog capable of managing a dedicated communication protocol instance. Theoretically, you could run up to eight separate I2C buses or eight independent SPI interfaces concurrently, limited only by available I\/O pins and cog resources. The breakout board provides sufficient pin access to implement at least four independent SPI devices or six independent I2C buses with appropriate pull-up resistor configuration.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e \u003cp\u003e\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Parallax 64019 P2 Edge Mini Breakout Board today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Parallax 64019 P2 Edge Mini Breakout Board Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/all\"\u003eour full catalog\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743605403905,"sku":"TTD-7906","price":3304.02,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/de6547338bcd4e39c196dfe3e989bc89.jpg?v=1778060299"},{"product_id":"rtc-shield-for-odroid-c2","title":"RTC Shield for ODROID-C2","description":"\u003cp\u003eRTC Shield for ODROID-C2\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eCompatible Board\u003c\/td\u003e \u003ctd\u003eODROID-C2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eType\u003c\/td\u003e \u003ctd\u003eRTC (Real-Time Clock) shield\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose RTC Shield for ODROID-C2?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of RTC Shield for ODROID-C2\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eAdds a hardware real-time clock to the ODROID-C2 for accurate offline timekeeping\u003c\/li\u003e \u003cli\u003eBattery-backed design keeps time even when the board is powered off\u003c\/li\u003e \u003cli\u003ePurpose-built shield format for straightforward installation\u003c\/li\u003e \u003cli\u003eUseful where network time sync isn't reliably available\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eData-logging projects needing accurate offline timestamps\u003c\/li\u003e \u003cli\u003eHeadless ODROID-C2 deployments without internet access\u003c\/li\u003e \u003cli\u003eEmbedded Linux projects requiring reliable timekeeping\u003c\/li\u003e \u003cli\u003eIoT and automation projects on ODROID-C2\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eHow long will delivery take?\u003c\/summary\u003e\u003cp\u003e\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is your return policy?\u003c\/summary\u003e\u003cp\u003eWe do not offer returns for change of mind.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat payment methods are accepted?\u003c\/summary\u003e\u003cp\u003e\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk \/ wholesale pricing?\u003c\/summary\u003e\u003cp\u003eYes — for bulk enquiries, WhatsApp us at +91 78285 34155.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your RTC Shield for ODROID-C2 today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy RTC Shield for ODROID-C2 Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/all\"\u003eour full catalog\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743614873857,"sku":"TTD-8017","price":642.36,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/0ba8a674ecf028e2e8436890cb56282b.jpg?v=1778060469"},{"product_id":"pirate-audio-speaker-for-raspberry-pi","title":"Pirate Audio: Speaker for Raspberry Pi","description":"\u003cp\u003ePirate Audio: Speaker for Raspberry Pi\u003c\/p\u003e\u003cp\u003eThe Pirate Audio Speaker HAT by PIMORONI is perfect for making a Lilliputian radio, sound effect player, or even as a teeny-weeny games console! The built-in 1W speaker isn't the loudest but it's great fun for lots of projects. The display and playback buttons let you control your audio or sound effects in a jiffy. Use our Pirate Audio software (more info below) to play local audio files (MP3, FLAC, etc) or stream from services like Spotify.\u003c\/p\u003e\u003cp\u003ePIMORONI Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.\u003c\/p\u003e\u003carticle id=\"description\"\u003eNote: \u003cul\u003e \u003cli\u003eThe DAC can be configured by adding \u003ccode\u003edtoverlay=hifiberry-dac\u003c\/code\u003e to the \u003ccode\u003e\/boot\/config.txt\u003c\/code\u003e file.\u003c\/li\u003e \u003cli\u003eThere is a DAC enable pin-BCM 25- that must be driven high to enable the DAC. You can do this by adding \u003ccode\u003egpio=25=op,dh\u003c\/code\u003e to the \u003ccode\u003e\/boot\/config.txt\u003c\/code\u003e file.\u003c\/li\u003e \u003cli\u003eThe buttons are active low and connected to pins BCM 5, 6, 16, and 24.\u003c\/li\u003e \u003cli\u003eThe display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu.\u003c\/li\u003e \u003cli\u003eIf you want to use these boards with a Pibow Coupé case (either for the Zero \/ Zero W or Pi 4), then you'll need to use a booster header to raise it up a little.\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e\u003c\/article\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eProduct Line\u003c\/td\u003e \u003ctd\u003ePirate Audio\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eType\u003c\/td\u003e \u003ctd\u003eSpeaker HAT\/add-on\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Device\u003c\/td\u003e \u003ctd\u003eRaspberry Pi\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Pirate Audio: Speaker for Raspberry Pi?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2 id=\"gallery\"\u003eKey Features of Pirate Audio: Speaker for Raspberry Pi\u003c\/h2\u003e\u003col\u003e \u003cli\u003eMAX98357A DAC \/ amplifier chip\u003c\/li\u003e \u003cli\u003eMono audio\u003c\/li\u003e \u003cli\u003eMini speaker (1W \/ 8Ohm, attached)\u003c\/li\u003e \u003cli\u003ePush-fit speaker terminals\u003c\/li\u003e \u003cli\u003e1.3″ IPS colour LCD (240x240px) (ST7789 driver)\u003c\/li\u003e \u003cli\u003eFour tactile buttons\u003c\/li\u003e \u003cli\u003eMini HAT-format board\u003c\/li\u003e \u003cli\u003eFully-assembled\u003c\/li\u003e \u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e \u003cli\u003eHAT-format add-on stacks directly onto Raspberry Pi GPIO for a compact audio setup\u003c\/li\u003e\n\u003cli\u003eIntegrates a small speaker with the Pi for standalone audio playback\u003c\/li\u003e\n\u003cli\u003ePart of the well-documented Pirate Audio accessory line\u003c\/li\u003e\n\u003cli\u003eSuits projects that need built-in sound without external speakers\u003c\/li\u003e\n\u003cli\u003eThe DAC can be configured by adding dtoverlay=hifiberry-dac to the \/boot\/config.txt file.\u003c\/li\u003e\n\u003cli\u003eThere is a DAC enable pin-BCM 25- that must be driven high to enable the DAC. You can do this by adding gpio=25=op,dh to the \/boot\/config.txt file.\u003c\/li\u003e\n\u003cli\u003eThe buttons are active low and connected to pins BCM 5, 6, 16, and 24.\u003c\/li\u003e\n\u003cli\u003eThe display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu.\u003c\/li\u003e\n\u003cli\u003eIf you want to use these boards with a Pibow Coupé case (either for the Zero \/ Zero W or Pi 4), then you'll need to use a booster header to raise it up a little.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eBuilding a compact Raspberry Pi media player\u003c\/li\u003e \u003cli\u003eDIY smart speaker or audio-notification projects\u003c\/li\u003e \u003cli\u003eRetro-gaming and emulation builds needing onboard audio\u003c\/li\u003e \u003cli\u003ePortable audio projects around a Raspberry Pi\u003c\/li\u003e \u003cli\u003ePrototyping and hobbyist electronics projects\u003c\/li\u003e\n\u003cli\u003eEducational STEM and college project builds\u003c\/li\u003e\n\u003cli\u003eEmbedded-systems and IoT experimentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e1 x PIMORONI Pirate Audio Speaker for Raspberry Pi\u003c\/p\u003e\u003cp\u003eShop online at \u003ca href=\"https:\/\/techdepot.in\"\u003eTech Depot India\u003c\/a\u003e - India's trusted electronics components store. Fast delivery across Bengaluru, Delhi, Hyderabad.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eIs technical support available?\u003c\/summary\u003e \u003cp\u003eYes, responsive support via email and WhatsApp for setup, troubleshooting, and application guidance.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Pirate Audio: Speaker for Raspberry Pi today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Pirate Audio: Speaker for Raspberry Pi Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/raspberry-pi\"\u003eRaspberry Pi \u0026amp; SBC\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743617462529,"sku":"TTD-8043","price":5490.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/02f78ddeda0ad72e257e9694e90e3b51.jpg?v=1778060505"},{"product_id":"adafruit-3211-rgb-matrix-bonnet-for-raspberry-pi","title":"Adafruit 3211 RGB Matrix Bonnet for Raspberry Pi","description":"\u003cp\u003eThe Adafruit 3211 RGB Matrix Bonnet is a specialized HAT (Hardware Attached on Top) expansion board designed to drive large RGB LED matrix displays directly from a Raspberry Pi single-board computer. Professional developers, embedded systems engineers, and IoT enthusiasts use this bonnet to create high-resolution pixel-based displays for data visualization, signage systems, and interactive installations without requiring external microcontrollers. This product solves the challenge of driving complex RGB matrix displays with precise timing and color control while maintaining the simplicity and accessibility of the Raspberry Pi ecosystem.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eRGB Matrix Display Driver HAT for Raspberry Pi\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eAdafruit Industries\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel Number\u003c\/td\u003e \u003ctd\u003e3211\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Displays\u003c\/td\u003e \u003ctd\u003e16x32, 32x32, 64x32 RGB LED Matrix Panels\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eGPIO Interface\u003c\/td\u003e \u003ctd\u003e40-pin Raspberry Pi GPIO Header\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVoltage Levels\u003c\/td\u003e \u003ctd\u003e3.3V (Raspberry Pi) to 5V (LED Matrix) with integrated level shifting\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRefresh Rate\u003c\/td\u003e \u003ctd\u003eUp to 160 Hz flicker-free operation\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eColor Depth\u003c\/td\u003e \u003ctd\u003e24-bit RGB (16.7 million colors)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Supply\u003c\/td\u003e \u003ctd\u003eExternal 5V supply required for LED matrix (Pi powered separately)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: RGB Matrix Display Driver HAT for Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eModel Number: 3211\u003c\/li\u003e\n\u003cli\u003eCompatible Displays: 16x32, 32x32, 64x32 RGB LED Matrix Panels\u003c\/li\u003e\n\u003cli\u003eGPIO Interface: 40-pin Raspberry Pi GPIO Header\u003c\/li\u003e\n\u003cli\u003eVoltage Levels: 3.3V (Raspberry Pi) to 5V (LED Matrix) with integrated level shifting\u003c\/li\u003e\n\u003cli\u003eRefresh Rate: Up to 160 Hz flicker-free operation\u003c\/li\u003e\n\u003cli\u003eColor Depth: 24-bit RGB (16.7 million colors)\u003c\/li\u003e\n\u003cli\u003ePower Supply: External 5V supply required for LED matrix (Pi powered separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose Adafruit 3211 RGB Matrix Bonnet for Raspberry Pi?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Adafruit 3211 RGB Matrix Bonnet for Raspberry Pi\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eIntegrated Level Shifting Circuitry: Safely converts Raspberry Pi 3.3V GPIO signals to 5V LED matrix requirements, eliminating the need for external level shifters and reducing circuit complexity\u003c\/li\u003e \u003cli\u003eHigh Refresh Rate Operation: Achieves up to 160 Hz refresh rate for flicker-free, smooth color transitions and animations across large display arrays\u003c\/li\u003e \u003cli\u003eMultiplexed Row Selection: Efficiently manages up to 16 rows of LED pixels through dedicated address lines, enabling support for large-format displays\u003c\/li\u003e \u003cli\u003ePWM Color Control: Built-in pulse width modulation circuitry provides precise brightness and color mixing for all 16.7 million color combinations\u003c\/li\u003e \u003cli\u003eStackable HAT Form Factor: Maintains Raspberry Pi's compact design while adding professional display capabilities without external wiring harnesses\u003c\/li\u003e \u003cli\u003eOpen-Source Library Support: Compatible with Adafruit's extensively documented Python and C libraries with example code for rapid development\u003c\/li\u003e \u003cli\u003eCurrent Protection: Integrated current limiting and power distribution prevents damage from high-brightness LED arrays\u003c\/li\u003e \u003cli\u003ePayment Options: UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eReal-Time Data Visualization: Display live sensor data, stock market tickers, weather information, or system metrics on large RGB matrices for monitoring dashboards and control room installations\u003c\/li\u003e \u003cli\u003eInteractive Art Installations: Create dynamic, color-changing visual displays for museums, galleries, and public spaces with synchronized animations and real-time input responsiveness\u003c\/li\u003e \u003cli\u003eAdvertising and Signage: Build energy-efficient digital signage systems with full-color capabilities for retail environments, transportation hubs, and event venues\u003c\/li\u003e \u003cli\u003eEducational Projects: Teach embedded systems, GPIO programming, and display control concepts with hands-on projects that produce immediate visual feedback\u003c\/li\u003e \u003cli\u003eGaming and Entertainment: Develop retro-style games, pixel art animations, and interactive displays for arcade cabinets and entertainment systems\u003c\/li\u003e \u003cli\u003eIoT Device Status Indication: Integrate RGB matrix displays into smart home hubs and IoT gateways to visualize network status, alerts, and device information\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by physically installing the Adafruit 3211 bonnet onto your Raspberry Pi by carefully aligning the 40-pin GPIO header and pressing firmly until fully seated. Connect your RGB LED matrix panel to the bonnet using the appropriate ribbon cable connector, ensuring correct polarity (typically marked with a red stripe). Provide external 5V power to the LED matrix through the dedicated power connector on the bonnet, keeping the Raspberry Pi powered through its standard micro-USB port. Enable the I2C and SPI interfaces on your Raspberry Pi through raspi-config if not already enabled, as the bonnet may utilize these protocols for optimal performance.\u003c\/p\u003e\u003cp\u003eInstall the Adafruit RGB Matrix library using pip: pip install adafruit-circuitpython-rgbmatrix. Load example code from Adafruit's GitHub repository to verify your hardware setup and display basic patterns. The library provides high-level functions for drawing pixels, lines, and text, handling all low-level GPIO timing automatically. Start with simple test patterns to confirm correct color output and brightness levels, then modify example scripts to display your custom content. The bonnet's multiplexing is handled transparently by the library, so you can program as if writing to a simple 2D pixel array without worrying about row selection timing or refresh rate management.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Adafruit 3211 RGB Matrix Bonnet operates on the principle of multiplexed LED control, where it manages individual red, green, and blue LED channels across multiple rows and columns simultaneously. The bonnet includes integrated PWM (Pulse Width Modulation) circuitry and shift registers that handle the complex timing requirements for RGB matrix displays, offloading this computational burden from the Raspberry Pi's CPU. This architecture allows for smooth color transitions, flicker-free operation at high refresh rates, and support for displays up to 64x32 pixels or larger through daisy-chaining capabilities. The bonnet connects directly to the Raspberry Pi's GPIO header, providing a clean, stackable form factor that maintains the Pi's portability while adding professional-grade display capabilities.\u003c\/p\u003e\u003cp\u003eWhat distinguishes the Adafruit 3211 from generic matrix drivers is its optimized firmware library and extensive documentation ecosystem. The bonnet features dedicated address lines for row selection, data lines for color information, and control signals (clock, latch, output enable) that work seamlessly with Adafruit's open-source Python and C libraries. The board includes integrated level shifting circuitry to safely interface 3.3V Raspberry Pi GPIO signals with the 5V requirements of standard RGB matrix panels, protecting both the Pi and the display from voltage incompatibilities. Built-in power distribution and current limiting resistors ensure stable operation even with high-brightness LED arrays drawing significant current.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat size RGB LED matrix panels can the Adafruit 3211 drive?\u003c\/summary\u003e \u003cp\u003eThe Adafruit 3211 is designed to drive standard 16x32, 32x32, and 64x32 RGB LED matrix panels commonly available from electronics suppliers. The bonnet supports up to 16 rows of multiplexed scanning. For larger displays, multiple bonnets can be used in parallel on different GPIO pins, or displays can be daisy-chained if the panel supports cascading. Always verify your specific panel's pinout and multiplexing configuration before connecting to ensure compatibility.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDo I need an external power supply for the LED matrix?\u003c\/summary\u003e \u003cp\u003eYes, absolutely. The Raspberry Pi's power supply cannot provide sufficient current for large RGB LED matrices, especially at full brightness with all LEDs illuminated. You must connect an external 5V power supply rated for at least 5-10 amps depending on your display size and brightness settings. The bonnet includes power distribution connectors for safely connecting this external supply to the LED matrix while keeping the Raspberry Pi powered through its standard micro-USB port. Never attempt to power the matrix from the Pi's GPIO pins.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs the Adafruit 3211 compatible with all Raspberry Pi models?\u003c\/summary\u003e \u003cp\u003eThe Adafruit 3211 is compatible with any Raspberry Pi model featuring the 40-pin GPIO header, including Raspberry Pi 3, 3B+, 4, Zero W, and newer models. It is not compatible with older Raspberry Pi models with 26-pin headers. The bonnet works with both the standard Raspberry Pi OS and alternative Linux distributions. Performance is best on Pi 3 and newer models due to faster processors, though it functions adequately on older hardware for smaller displays.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I control brightness and color independently?\u003c\/summary\u003e \u003cp\u003eYes, the Adafruit 3211 provides full PWM control over brightness for each color channel (red, green, blue) independently. The library functions allow you to set pixel colors using standard RGB values (0-255 for each channel), and the bonnet's PWM circuitry automatically handles the brightness modulation. You can also globally adjust overall display brightness through software commands, useful for adapting to different ambient light conditions or reducing power consumption.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat programming languages are supported?\u003c\/summary\u003e \u003cp\u003eThe Adafruit 3211 is primarily supported through Python using the Adafruit CircuitPython library, which is the recommended approach for beginners and rapid development. C\/C++ libraries are also available for advanced users requiring maximum performance. The bonnet's GPIO protocol is well-documented, allowing developers to write custom drivers in any language that can control GPIO pins, though this requires deep understanding of RGB matrix multiplexing timing.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Adafruit 3211 RGB Matrix Bonnet for Raspberry Pi today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Adafruit 3211 RGB Matrix Bonnet for Raspberry Pi Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743618019585,"sku":"TTD-8047","price":2170.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/6a89ab21a90c20ef5a65eba474c6a23d.jpg?v=1778060510"},{"product_id":"adafruit-3464-joy-bonnet-for-raspberry-pi","title":"Adafruit 3464 Joy Bonnet for Raspberry Pi","description":"\u003cp\u003eThe Adafruit 3464 Joy Bonnet is a specialized HAT (Hardware Attached on Top) expansion board designed for Raspberry Pi that integrates a complete gaming controller interface with dual analog joysticks, directional buttons, and action buttons for retro gaming and interactive applications. Professional game developers, embedded systems engineers, and IoT hobbyists use this bonnet to rapidly prototype handheld gaming devices, arcade cabinets, and interactive control systems without requiring complex GPIO wiring and external circuitry. This product solves the challenge of integrating multi-button input controls into Raspberry Pi projects by providing a pre-configured, ready-to-use solution that eliminates prototyping time and reduces component count significantly.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eRaspberry Pi HAT Gaming Controller Bonnet\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eAdafruit Industries\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel Number\u003c\/td\u003e \u003ctd\u003e3464\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Raspberry Pi Models\u003c\/td\u003e \u003ctd\u003eRaspberry Pi 3B, 3B+, 4B, Zero W with GPIO header\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput Buttons\u003c\/td\u003e \u003ctd\u003e2x Analog Joysticks, 4x Directional Buttons, 4x Action Buttons (A,B,X,Y), 2x Shoulder Buttons\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface Protocol\u003c\/td\u003e \u003ctd\u003eGPIO and I2C communication\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V logic level compatible with Raspberry Pi\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eJoystick Resolution\u003c\/td\u003e \u003ctd\u003e10-bit analog-to-digital conversion per axis\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Dimensions\u003c\/td\u003e \u003ctd\u003e65mm x 56mm (standard Raspberry Pi HAT form factor)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003cul\u003e\n\u003cli\u003e \u003cstrong\u003eProduct Type:\u003c\/strong\u003e Raspberry Pi HAT Gaming Controller Bonnet\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eBrand:\u003c\/strong\u003e Adafruit Industries\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eModel Number:\u003c\/strong\u003e 3464\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eCompatible Raspberry Pi Models:\u003c\/strong\u003e Raspberry Pi 3B, 3B+, 4B, Zero W with GPIO header\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eInput Buttons:\u003c\/strong\u003e 2x Analog Joysticks, 4x Directional Buttons, 4x Action Buttons (A,B,X,Y), 2x Shoulder Buttons\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eInterface Protocol:\u003c\/strong\u003e GPIO and I2C communication\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose Adafruit 3464 Joy Bonnet for Raspberry Pi?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Adafruit 3464 Joy Bonnet for Raspberry Pi\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eDual analog joysticks with 10-bit resolution providing smooth directional control for gaming applications and robotics projects\u003c\/li\u003e \u003cli\u003e12 programmable input buttons including directional pad, action buttons, and shoulder buttons enabling complex game control schemes\u003c\/li\u003e \u003cli\u003eI2C and GPIO interface support allowing flexible integration with Adafruit libraries and custom Python code\u003c\/li\u003e \u003cli\u003eIntegrated debouncing circuitry eliminating button bounce artifacts and ensuring reliable input detection in rapid-fire scenarios\u003c\/li\u003e \u003cli\u003eStandard 40-pin Raspberry Pi HAT form factor providing secure mechanical alignment and electrical connection\u003c\/li\u003e \u003cli\u003eLow-power design drawing minimal current from Raspberry Pi's power supply suitable for battery-powered handheld devices\u003c\/li\u003e \u003cli\u003eOpen-source firmware and comprehensive Python library documentation enabling rapid development cycles\u003c\/li\u003e \u003cli\u003eCompatible with RetroPie, Recalbox, and custom game frameworks supporting multiple gaming ecosystems\u003c\/li\u003e \u003cli\u003ePayment Options: UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eRetro gaming cabinets and handheld emulation devices using RetroPie or Recalbox where the Joy Bonnet provides authentic arcade-style control input\u003c\/li\u003e \u003cli\u003eEducational robotics projects requiring joystick-based control of mobile robots, robotic arms, and autonomous vehicles with real-time analog feedback\u003c\/li\u003e \u003cli\u003eCustom game development platforms where developers build Python-based games leveraging the bonnet's button and joystick input capabilities\u003c\/li\u003e \u003cli\u003eArcade machine restoration and custom builds where the Joy Bonnet integrates into wooden enclosures replacing original control panels\u003c\/li\u003e \u003cli\u003eInteractive art installations and museum exhibits requiring intuitive multi-button control interfaces with analog precision\u003c\/li\u003e \u003cli\u003eAccessibility gaming controllers for users requiring customized button layouts and joystick sensitivity adjustments\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eInstallation of the Adafruit 3464 Joy Bonnet begins by powering off your Raspberry Pi and carefully aligning the bonnet's 40-pin connector with the Raspberry Pi's GPIO header, ensuring proper orientation with the notch on the connector matching the key on the GPIO header. Press down firmly until the bonnet sits flush against the Raspberry Pi. Once physically installed, enable I2C communication on your Raspberry Pi using raspi-config by navigating to Interfacing Options and enabling I2C. Download and install the Adafruit Joy Bonnet library using pip with the command: pip3 install adafruit-circuitpython-joy-bonnet. Verify installation by running the provided example script which tests all buttons and joystick axes, displaying real-time input values to confirm proper functionality.\u003c\/p\u003e\u003cp\u003eFor programming, import the Adafruit Joy Bonnet library in your Python script and initialize the bonnet object with the appropriate I2C address. The library provides methods to read joystick X and Y axis values as 10-bit integers (0-1023) and boolean states for all buttons. Implement event handlers or polling loops to detect button presses and joystick movements, then map these inputs to your game logic or robot control functions. For RetroPie integration, the Joy Bonnet is automatically recognized as a controller device, requiring only configuration through the RetroPie controller setup menu. Test all inputs thoroughly before deploying in production environments, particularly verifying joystick center deadzone calibration to prevent unwanted drift in gaming or robotic applications.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Adafruit 3464 Joy Bonnet operates on the principle of multiplexed analog and digital input sensing through the Raspberry Pi's GPIO pins and I2C interface. The bonnet features dual analog joysticks that communicate via analog-to-digital conversion, four directional buttons, four action buttons (A, B, X, Y), and two shoulder buttons, all integrated onto a single PCB that stacks directly onto the Raspberry Pi's 40-pin header. The device uses the Adafruit library ecosystem, providing pre-written Python code and comprehensive documentation that enables developers to read joystick positions and button states with minimal configuration overhead. The bonnet's design includes built-in debouncing circuitry and proper impedance matching to ensure reliable input detection even in electrically noisy environments common in arcade and gaming setups.\u003c\/p\u003e\u003cp\u003eWhat distinguishes the Adafruit 3464 from generic gaming controllers is its integration specifically for Raspberry Pi's hardware architecture, eliminating the need for USB adapters or wireless connectivity that introduce latency. The bonnet draws minimal current from the Raspberry Pi's power supply and includes proper voltage regulation for the analog joystick circuits. The compact form factor allows integration into custom enclosures, handheld cases, and arcade cabinet builds. The open-source nature of Adafruit's design means the bonnet is compatible with RetroPie, Recalbox, and custom Python-based game frameworks, making it ideal for educational projects, maker communities, and commercial embedded gaming applications.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eIs the Adafruit 3464 Joy Bonnet compatible with Raspberry Pi Zero?\u003c\/summary\u003e \u003cp\u003eYes, the Joy Bonnet is compatible with Raspberry Pi Zero W and Zero WH models that include the 40-pin GPIO header. However, the standard Raspberry Pi Zero without headers requires soldering the header pins before the bonnet can be installed. The bonnet's compact design makes it ideal for Zero-based handheld gaming projects due to its minimal additional height.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the joystick sensitivity and can it be adjusted?\u003c\/summary\u003e \u003cp\u003eThe joysticks provide 10-bit analog-to-digital conversion, delivering values from 0-1023 per axis with the center position around 512. Sensitivity is fully adjustable in software through calibration routines in the Python library. You can implement deadzone filtering to ignore small movements near center, and scale the raw values to your application's required sensitivity range, making it suitable for both precise gaming and coarse robotics control.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes the Joy Bonnet work with wireless controllers or does it replace them?\u003c\/summary\u003e \u003cp\u003eThe Joy Bonnet is a hardwired input device that does not replace wireless controllers but complements them. In RetroPie and other gaming platforms, you can configure both the Joy Bonnet and wireless controllers simultaneously, allowing players to choose their preferred input method. The bonnet is superior for projects requiring low-latency response and projects where wireless connectivity is unreliable or undesirable.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use multiple Joy Bonnets on a single Raspberry Pi?\u003c\/summary\u003e \u003cp\u003eNo, only one Joy Bonnet can be physically stacked on a single Raspberry Pi due to the shared 40-pin header. However, you can use multiple external USB gaming controllers or implement alternative I2C-based input devices if you require multiple control interfaces. For multi-player arcade cabinets, use separate Raspberry Pi units or implement USB controller hubs with standard gaming controllers.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Adafruit 3464 Joy Bonnet for Raspberry Pi today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Adafruit 3464 Joy Bonnet for Raspberry Pi Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743618117889,"sku":"TTD-8048","price":1840.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/10d8bd4715073243ea60576559f524b0.jpg?v=1778060511"},{"product_id":"proto-shield","title":"Proto Shield","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Proto Shield is a dedicated prototyping expansion board designed for Arduino and compatible microcontroller platforms, enabling rapid development and testing of embedded projects without soldering directly to the main board. Electronics engineers, hobbyists, and IoT developers rely on Proto Shield to accelerate project development cycles while maintaining circuit integrity and component reusability. This shield solves the critical problem of prototype fragility and permanent component damage by providing a temporary, modular testing environment with integrated breadboard functionality and pin headers.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eArduino Expansion Shield \/ Prototyping Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatibility\u003c\/td\u003e \u003ctd\u003eArduino Uno, Duemilanove, and compatible boards\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBreadboard Tie-Points\u003c\/td\u003e \u003ctd\u003e170 connection points\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rails\u003c\/td\u003e \u003ctd\u003e5V and GND distribution with reduced impedance traces\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeader Connectors\u003c\/td\u003e \u003ctd\u003eStandard 0.1 inch pitch stackable headers\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Material\u003c\/td\u003e \u003ctd\u003eFR-4 with solder mask and silk-screen\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions\u003c\/td\u003e \u003ctd\u003e68.6mm x 53.3mm x 10mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003eApproximately 15 grams\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Proto Shield?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Proto Shield\u003c\/h2\u003e\u003cul\u003e \u003cli\u003e170-Point Breadboard Integration: Provides ample workspace for prototyping analog and digital circuits without permanent soldering to the Arduino board\u003c\/li\u003e \u003cli\u003eStackable Header Design: Full-height headers enable multiple Proto Shields to be stacked for complex multi-layer prototyping environments\u003c\/li\u003e \u003cli\u003ePower Distribution Optimization: Dedicated 5V and GND rails with wide copper traces minimize voltage drop and noise during high-current applications\u003c\/li\u003e \u003cli\u003ePin Assignment Labeling: Comprehensive silk-screen markings for all GPIO, analog, and communication pins reduce integration errors and accelerate development\u003c\/li\u003e \u003cli\u003eCompact Form Factor: 68.6mm x 53.3mm dimensions maintain compatibility with standard Arduino enclosures and breadboard arrangements\u003c\/li\u003e \u003cli\u003eFR-4 PCB Construction: High-quality substrate with solder mask ensures durability through multiple prototype iterations and thermal cycling\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eSensor Integration Testing: Rapidly prototype sensor circuits including temperature, humidity, pressure, and motion sensors without permanent board modifications\u003c\/li\u003e \u003cli\u003eSignal Conditioning Development: Test analog amplification, filtering, and level-shifting circuits for ADC input preparation and signal integrity validation\u003c\/li\u003e \u003cli\u003eMotor and Actuator Control: Prototype PWM-based motor control circuits, relay switching logic, and servo control systems with safe isolation from the main board\u003c\/li\u003e \u003cli\u003eIoT Device Prototyping: Develop WiFi and Bluetooth module integration circuits, power management circuits, and multi-sensor data acquisition systems for IoT applications\u003c\/li\u003e \u003cli\u003eEducational Electronics Training: Ideal for embedded systems courses where students need to prototype circuits safely without risking permanent damage to expensive microcontroller boards\u003c\/li\u003e \u003cli\u003eRapid Hardware Iteration: Accelerate design cycles by testing multiple circuit configurations sequentially on the same Arduino board without desoldering components\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eTo install the Proto Shield, align the stackable headers with the corresponding pin headers on your Arduino board and press firmly until fully seated. Ensure proper alignment of the power pins (5V and GND) before insertion to prevent reverse polarity damage. Once mounted, the shield provides direct access to all Arduino GPIO pins, analog inputs, and communication buses through the integrated breadboard area. You can now insert jumper wires and components into the breadboard tie-points to prototype your circuit configuration.\u003c\/p\u003e\u003cp\u003eWhen building your prototype circuit, follow standard breadboard practices: use the horizontal rows for signal distribution and reserve the vertical rails for power and ground connections. Verify all connections before applying power to the Arduino board. For complex circuits requiring multiple shields, stack additional Proto Shields using the extended headers, ensuring each layer is properly seated. After testing and validation, document your working circuit configuration and either transfer it to a permanent PCB or maintain the prototype for ongoing development and iteration.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Proto Shield is engineered as a stackable expansion module that mounts directly onto Arduino Uno, Arduino Mega, and compatible development boards through standard header connectors. It features an integrated breadboard area with 170 tie-points, allowing engineers to prototype circuits without permanent modifications. The shield maintains full electrical continuity with the host microcontroller's GPIO pins, analog inputs, power rails, and communication buses, enabling seamless integration of sensors, actuators, and signal conditioning circuits during the development phase.\u003c\/p\u003e\u003cp\u003eThis prototyping solution incorporates power distribution rails with dedicated 5V and GND traces, reducing noise and improving signal integrity during testing. The modular design allows multiple Proto Shields to be stacked vertically, creating complex multi-layer prototyping environments for advanced applications. The board includes silk-screen labeling for all pin assignments, simplifying circuit layout and reducing integration errors. Its compact form factor ensures compatibility with standard Arduino enclosures while providing sufficient workspace for typical sensor integration and signal processing circuits.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eIs the Proto Shield compatible with Arduino Mega and other board variants?\u003c\/summary\u003e \u003cp\u003eThe standard Proto Shield is designed for Arduino Uno and compatible boards with the R3 header layout. For Arduino Mega compatibility, you will need the Mega-specific Proto Shield variant which features extended headers to accommodate the additional pins on the Mega board. Always verify header pin count and spacing before purchasing to ensure compatibility with your specific microcontroller platform.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I stack multiple Proto Shields on a single Arduino board?\u003c\/summary\u003e \u003cp\u003eYes, the stackable header design allows you to mount multiple Proto Shields vertically on a single Arduino board. However, ensure that your power supply can deliver sufficient current for all connected components across all stacked shields. Additionally, be mindful of the increased height when mounting the stacked assembly in an enclosure, and verify that no mechanical interference occurs with surrounding components.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum current capacity of the Proto Shield power rails?\u003c\/summary\u003e \u003cp\u003eThe Proto Shield power distribution traces are designed to safely handle up to 2 amperes at 5V for typical prototyping applications. For higher current requirements, use external power supplies connected directly to your components rather than routing current through the shield's internal traces. Always check the Arduino board's power specifications to ensure the main power supply can deliver the required current without voltage regulation issues.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Proto Shield today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Proto Shield Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743618478337,"sku":"TTD-8051","price":873.44,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/fdd4be91691a1bbc8f894504062b0923.png?v=1778060515"},{"product_id":"sdram-shield","title":"SDRAM Shield","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe SDRAM Shield is a specialized Arduino-compatible expansion board designed to add external synchronous dynamic random-access memory (SDRAM) capability to microcontroller-based projects. Embedded systems engineers, IoT developers, and robotics professionals use this shield to overcome the severe memory limitations of standard microcontrollers when developing data-intensive applications. This product solves the critical problem of insufficient RAM for buffering sensor data, storing multimedia content, or running complex algorithms on resource-constrained platforms.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eArduino SDRAM Expansion Shield\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eGeneric\/Compatible\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMemory Capacity\u003c\/td\u003e \u003ctd\u003e512KB to 8MB SDRAM\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBus Width\u003c\/td\u003e \u003ctd\u003e16-bit or 32-bit data bus\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V and 5V compatible\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAccess Time\u003c\/td\u003e \u003ctd\u003eLess than 70 nanoseconds\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRefresh Rate\u003c\/td\u003e \u003ctd\u003e64ms refresh cycle\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface\u003c\/td\u003e \u003ctd\u003eArduino Shield Connector (stackable)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose SDRAM Shield?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of SDRAM Shield\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eHigh-speed SDRAM interface with access times under 70 nanoseconds, enabling rapid data buffering for real-time sensor acquisition and multimedia streaming applications\u003c\/li\u003e \u003cli\u003eDual voltage support with integrated level shifters for seamless integration with both 3.3V ARM-based and 5V AVR microcontroller platforms\u003c\/li\u003e \u003cli\u003eConfigurable memory addressing supporting multiple SDRAM module sizes from 512KB to 8MB, allowing scalable memory expansion based on project requirements\u003c\/li\u003e \u003cli\u003eAutomatic refresh cycle management handled by onboard controller IC, eliminating the need for manual memory refresh timing in application code\u003c\/li\u003e \u003cli\u003eStackable shield design with pass-through headers, enabling simultaneous use of multiple expansion shields for additional I\/O or sensor interfaces\u003c\/li\u003e \u003cli\u003eComprehensive signal conditioning with proper termination resistors and decoupling capacitors ensuring stable operation at high clock frequencies\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eData logging systems requiring buffering of high-frequency sensor data from accelerometers, gyroscopes, and pressure sensors before writing to SD cards or cloud storage\u003c\/li\u003e \u003cli\u003eAudio and video processing applications including MP3 playback, JPEG image processing, and real-time video frame buffering on Arduino platforms\u003c\/li\u003e \u003cli\u003eMachine learning inference on edge devices where model weights and intermediate computation buffers exceed native microcontroller RAM capacity\u003c\/li\u003e \u003cli\u003eAdvanced robotics projects implementing simultaneous multi-sensor fusion, path planning algorithms, and real-time motion control requiring substantial working memory\u003c\/li\u003e \u003cli\u003eIndustrial IoT gateways aggregating data from multiple sensor networks and performing local analytics before transmission to cloud platforms\u003c\/li\u003e \u003cli\u003eEducational projects in embedded systems design teaching memory management, bus protocols, and advanced microcontroller programming techniques\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eInstallation begins by carefully aligning the SDRAM Shield with the Arduino board's header pins, ensuring proper seating of the connector without forcing or bending pins. Insert the shield vertically into the headers with gentle pressure until it sits flush against the microcontroller board. Before powering on, verify that all pins are properly seated and no bent leads are visible. Once physically installed, connect your Arduino to the computer via USB and upload the appropriate SDRAM library and initialization code. Most compatible libraries provide simple functions like sdram_init() to configure the memory controller and sdram_read()\/sdram_write() for memory access operations.\u003c\/p\u003e\u003cp\u003eConfiguration involves setting appropriate clock speeds and timing parameters in your firmware to match the specific SDRAM module installed on your shield. The memory controller typically requires initialization of row and column address lines, refresh timing parameters, and chip select signals. After initialization, treat the external SDRAM as standard memory using malloc() and pointer operations in your C\/C++ code. Always include proper error checking and data validation when accessing external memory, as timing violations or electrical noise can cause data corruption. For optimal performance, minimize memory access latency by clustering related data reads and writes, and consider using DMA transfers for large bulk data operations to reduce CPU overhead.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SDRAM Shield operates by interfacing high-capacity SDRAM modules with Arduino and compatible microcontroller boards through a standardized shield connector. It manages the complex timing requirements and refresh cycles necessary for SDRAM operation, translating simple microcontroller I\/O signals into the precise control signals required by SDRAM chips. The shield typically incorporates a dedicated memory controller IC that handles address multiplexing, chip select logic, and read\/write cycle management, allowing developers to access external memory as if it were native microcontroller RAM through standard C\/C++ pointer operations and memory allocation functions.\u003c\/p\u003e\u003cp\u003eThis particular SDRAM Shield model stands out through its support for multiple memory configurations, typically ranging from 512KB to 8MB of additional storage, and its compatibility with both 3.3V and 5V microcontroller platforms. The board features robust signal conditioning, proper impedance matching for high-speed memory buses, and comprehensive decoupling capacitor placement to ensure signal integrity during rapid memory access cycles. Built-in level shifting circuitry protects both the microcontroller and SDRAM from voltage incompatibilities, making it a reliable solution for professional-grade embedded systems development.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum memory capacity supported by this SDRAM Shield?\u003c\/summary\u003e \u003cp\u003eThis SDRAM Shield supports maximum capacities up to 8MB of external SDRAM, depending on the memory module installed and the addressing capabilities of your specific microcontroller. Most Arduino boards can address up to 64KB directly, but with proper bank switching techniques and memory controller configuration, the full 8MB becomes accessible. Check your microcontroller's datasheet for specific memory addressing limitations and consult the shield's documentation for recommended SDRAM module specifications.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs this shield compatible with Arduino Mega, Arduino Due, and other Arduino variants?\u003c\/summary\u003e \u003cp\u003eYes, this shield is compatible with most Arduino boards featuring standard shield connectors including Arduino Uno, Mega, and Mega 2560. Arduino Due and newer ARM-based boards require verification of voltage compatibility and may need additional level shifting configuration. Always confirm your specific board model supports 3.3V or 5V operation before purchase. Some clones and non-standard boards may have pin layout variations that prevent proper shield alignment.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat programming libraries are available for accessing SDRAM on this shield?\u003c\/summary\u003e \u003cp\u003eMultiple open-source libraries exist including SRAM libraries adapted for SDRAM operation, with popular options available through the Arduino IDE library manager. The most widely used libraries provide functions for memory initialization, read\/write operations, and automatic refresh management. We recommend consulting the shield manufacturer's documentation or GitHub repositories for the latest compatible library versions, as library support varies based on your specific microcontroller and SDRAM module combination.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use this SDRAM Shield simultaneously with other expansion shields?\u003c\/summary\u003e \u003cp\u003eYes, the stackable design with pass-through headers allows simultaneous use of multiple shields, provided they do not share the same I\/O pins or bus lines. The SDRAM Shield uses specific pins for memory addressing and control signals, so verify that any additional shields do not conflict with these pins. Document your pin usage carefully and test thoroughly before deploying in production applications to avoid data corruption from pin conflicts.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your SDRAM Shield today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy SDRAM Shield Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743618674945,"sku":"TTD-8053","price":3587.04,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/e9708b1099c59850bcb507cb204758da.png?v=1778060518"},{"product_id":"io-shield","title":"IO Shield","description":"\u003cp\u003eIO Shield\u003c\/p\u003e\u003ch2\u003eWhy Choose IO Shield?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eYes — message us on WhatsApp for bulk or business pricing on IO Shield.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your IO Shield today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy IO Shield Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743618806017,"sku":"TTD-8054","price":5601.04,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/bf3e41281816f86a7dade9769fd28cd9.jpg?v=1778060519"},{"product_id":"rock-pi-802-3at-poe-hat","title":"Rock Pi 802.3AT POE Hat","description":"\u003cp\u003eRock Pi 802.3AT POE Hat\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003ePoE Standard\u003c\/td\u003e \u003ctd\u003eIEEE 802.3at\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eType\u003c\/td\u003e \u003ctd\u003ePoE HAT\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Boards\u003c\/td\u003e \u003ctd\u003eROCK Pi series\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Rock Pi 802.3AT POE Hat?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Rock Pi 802.3AT POE Hat\u003c\/h2\u003e\u003cul\u003e \u003cli\u003e802.3at (PoE+) support delivers higher power than basic 802.3af PoE\u003c\/li\u003e \u003cli\u003eRemoves the need for a separate power adapter when a PoE switch is available\u003c\/li\u003e \u003cli\u003eHAT format stacks directly onto compatible ROCK Pi boards\u003c\/li\u003e \u003cli\u003eSimplifies cabling for wall- or ceiling-mounted single-board-computer deployments\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003ePowering a ROCK Pi board over a single Ethernet cable\u003c\/li\u003e \u003cli\u003eCeiling- or wall-mounted SBC deployments (cameras, sensors, access points)\u003c\/li\u003e \u003cli\u003eReducing cable clutter in network-closet or rack SBC setups\u003c\/li\u003e \u003cli\u003eRemote or hard-to-reach installations without nearby AC power\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eHow long will delivery take?\u003c\/summary\u003e\u003cp\u003e\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is your return policy?\u003c\/summary\u003e\u003cp\u003eWe do not offer returns for change of mind.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat payment methods are accepted?\u003c\/summary\u003e\u003cp\u003e\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk \/ wholesale pricing?\u003c\/summary\u003e\u003cp\u003eYes — for bulk enquiries, WhatsApp us at +91 78285 34155.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Rock Pi 802.3AT POE Hat today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Rock Pi 802.3AT POE Hat Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/raspberry-pi\"\u003eRaspberry Pi \u0026amp; SBC\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743620149505,"sku":"TTD-8066","price":4364.02,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/369cc0733fa16985ef515e39fcd2675d.png?v=1778060538"},{"product_id":"rock-pi-4x-m-2-extension-board-v1-6","title":"Rock pi 4X - M.2 Extension Board V1.6","description":"\u003cp\u003ePurchase the\u003c\/p\u003e\u003cp\u003eThe Rock pi 4X - M.2 Extension Board V1.6 is a high-performance NVMe SSD expansion module designed specifically for the Rock pi 4X single-board computer, enabling direct M.2 2280 form factor storage integration with PCIe Gen3 interface support. Systems engineers, embedded Linux developers, and IoT professionals use this extension board to dramatically increase storage capacity and performance for edge computing applications, media servers, and high-throughput data processing tasks. This board solves the critical storage bottleneck in Rock pi 4X deployments by providing native NVMe support, eliminating the need for external USB storage solutions and delivering sequential read\/write speeds exceeding 3,500 MB\/s.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eM.2 NVMe SSD Extension Board\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eRock pi\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel\u003c\/td\u003e \u003ctd\u003eRock pi 4X - M.2 Extension Board V1.6\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible SSD Form Factor\u003c\/td\u003e \u003ctd\u003eM.2 2280 NVMe\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface Standard\u003c\/td\u003e \u003ctd\u003ePCIe Gen3 x4\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaximum Theoretical Bandwidth\u003c\/td\u003e \u003ctd\u003e4 GB\/s\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Management\u003c\/td\u003e \u003ctd\u003eDual-phase voltage regulation with 3.3V\/1.8V supplies\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e0°C to 60°C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBoard Dimensions\u003c\/td\u003e \u003ctd\u003eCustom form factor optimized for Rock pi 4X mounting\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Rock pi 4X - M.2 Extension Board V1.6?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Rock pi 4X - M.2 Extension Board V1.6\u003c\/h2\u003e\u003cul\u003e \u003cli\u003ePCIe Gen3 x4 Interface delivering up to 4 GB\/s theoretical bandwidth for high-speed NVMe SSD operation with minimal latency overhead\u003c\/li\u003e \u003cli\u003eDual-phase voltage regulation with dedicated power delivery network ensuring stable 3.3V and 1.8V rails under sustained I\/O loads and transient current spikes\u003c\/li\u003e \u003cli\u003eIntegrated thermal management with thermal pad interface and heatspreader design maintaining optimal SSD operating temperatures below 50°C during continuous operation\u003c\/li\u003e \u003cli\u003eOptimized PCB layout with improved grounding planes and impedance-controlled PCIe traces reducing signal integrity issues and bit error rates in high-speed data transmission\u003c\/li\u003e \u003cli\u003eSeamless mechanical integration with Rock pi 4X platform requiring no GPIO header obstruction or cooling solution interference\u003c\/li\u003e \u003cli\u003eNative Linux kernel driver support with zero firmware modifications required for immediate plug-and-play functionality\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eEdge AI and Machine Learning: Deploy TensorFlow or PyTorch models on Rock pi 4X with fast SSD storage for rapid model loading and inference data caching, enabling real-time computer vision applications at network edges\u003c\/li\u003e \u003cli\u003eVideo Transcoding and Media Processing: Achieve sustained 4K video encoding\/decoding with high-speed NVMe storage supporting frame buffer operations and intermediate file caching for broadcast-quality media production workflows\u003c\/li\u003e \u003cli\u003eDatabase and Data Analytics: Run embedded PostgreSQL, MongoDB, or InfluxDB instances with NVMe backend storage providing sub-millisecond query response times for IoT sensor data aggregation and time-series analytics\u003c\/li\u003e \u003cli\u003eNetwork-Attached Storage and Backup: Configure Rock pi 4X as a high-performance NAS device with NVMe SSD backend, delivering gigabit-class throughput for enterprise backup and file synchronization operations\u003c\/li\u003e \u003cli\u003eSoftware Development and Embedded Linux: Accelerate cross-compilation workflows and Docker container operations with fast SSD storage, reducing build times and enabling rapid iterative development cycles\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eInstallation of the Rock pi 4X - M.2 Extension Board V1.6 requires first powering down your Rock pi 4X system and disconnecting all peripherals. Carefully align the extension board's connector with the designated M.2 interface port on the Rock pi 4X, ensuring proper seating by applying gentle downward pressure until you hear an audible click indicating secure mechanical engagement. The board should sit flush against the Rock pi 4X with no gaps or misalignment. Next, insert your M.2 2280 NVMe SSD into the M.2 slot at a 30-degree angle, then press down firmly and secure with the provided retention screw. Apply the thermal pad to the SSD's top surface if not pre-installed, ensuring full contact between the SSD and the heatspreader component.\u003c\/p\u003e\u003cp\u003eAfter physical installation, power on your Rock pi 4X and boot into your Linux operating system. The NVMe SSD should be automatically detected by the kernel without requiring any firmware modifications or driver installations, as the Rock pi 4X ships with PCIe driver support enabled by default. Verify detection by running the command lsblk or nvme list in a terminal window to confirm the SSD appears as \/dev\/nvme0n1 or similar. Partition and format the drive using standard Linux tools such as fdisk, parted, or GParted, then mount the filesystem to your desired location. For optimal performance, enable TRIM support by ensuring the fstrim service is active, which maintains SSD performance through periodic garbage collection operations. Monitor SSD health and temperature using nvme-cli utilities with commands like nvme smart-log \/dev\/nvme0n1 to ensure long-term reliability.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Rock pi 4X - M.2 Extension Board V1.6 is engineered as a dedicated peripheral module that connects directly to the Rock pi 4X through a high-speed PCIe interface, providing seamless NVMe M.2 2280 SSD integration. The board features a robust design with proper power management circuitry, thermal dissipation pathways, and electrical isolation to ensure stable operation under sustained I\/O loads. The V1.6 revision incorporates improved power delivery architecture with dual-phase voltage regulation, enhanced EMI shielding, and optimized PCB trace routing to minimize signal integrity issues that plagued earlier iterations. This extension board operates at PCIe Gen3 x4 speeds, delivering theoretical bandwidth of up to 4 GB\/s, making it ideal for applications requiring high-speed sequential data access patterns such as video transcoding, database operations, and machine learning model training on edge devices.\u003c\/p\u003e\u003cp\u003eThe board's design philosophy emphasizes compatibility and ease of integration, with straightforward mechanical mounting that requires no additional firmware modifications beyond standard Linux kernel drivers. The M.2 slot features proper keying and retention mechanisms to prevent accidental disconnection during operation, while the extension board itself mounts cleanly alongside the Rock pi 4X without obstructing GPIO headers or cooling solutions. Thermal management is addressed through a dedicated thermal pad interface that conducts heat from the SSD directly to an integrated heatspreader, maintaining optimal operating temperatures even during extended write operations. The V1.6 revision also includes improved grounding planes and via stitching patterns that reduce impedance mismatches in the PCIe signal paths, resulting in more reliable data transmission and reduced bit error rates compared to earlier board versions.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum storage capacity supported by the Rock pi 4X - M.2 Extension Board V1.6?\u003c\/summary\u003e \u003cp\u003eThe extension board supports any M.2 2280 NVMe SSD currently available in the market, with no firmware-imposed capacity limitations. Practically, you can install SSDs ranging from 256GB to 2TB or larger, depending on your specific storage requirements and budget. The board's interface operates at the protocol level and does not restrict capacity based on hardware design, making it future-proof for larger capacity drives as they become available.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs the Rock pi 4X - M.2 Extension Board V1.6 compatible with all Rock pi 4 variants?\u003c\/summary\u003e \u003cp\u003eThis extension board is specifically designed for the Rock pi 4X model and is not compatible with Rock pi 4, Rock pi 4B, or Rock pi 4C variants due to different PCIe interface implementations and physical connector locations. Attempting to use this board with incompatible models may result in hardware damage. Always verify your Rock pi 4X model before purchasing this extension board.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat performance improvement can I expect when using NVMe storage compared to microSD cards?\u003c\/summary\u003e \u003cp\u003eNVMe SSDs connected via the Rock pi 4X - M.2 Extension Board V1.6 deliver sequential read speeds of 3,000-3,500 MB\/s and write speeds of 2,500-3,000 MB\/s, compared to microSD cards which typically achieve 50-100 MB\/s. This represents a 30-70x performance improvement, resulting in dramatically faster boot times, application loading, and file I\/O operations. Random access performance improves even more dramatically, with NVMe delivering 50,000+ IOPS compared to microSD cards achieving only 500-2,000 IOPS.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes the extension board require additional power supply or cooling?\u003c\/summary\u003e \u003cp\u003eThe extension board draws power directly from the Rock pi 4X's PCIe interface and does not require separate power connections. The integrated thermal management design with heatspreader and thermal pad interface provides adequate passive cooling for most NVMe SSDs under normal operating conditions. In high-performance scenarios with sustained 100% I\/O loads, consider adding an active cooling solution such as a small fan directed at the SSD, though this is rarely necessary for typical edge computing applications.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e \u003cp\u003e\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Rock pi 4X - M.2 Extension Board V1.6 today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Rock pi 4X - M.2 Extension Board V1.6 Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/raspberry-pi\"\u003eRaspberry Pi \u0026amp; SBC\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743620280577,"sku":"TTD-8067","price":1742.64,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/5b5157ee75ccc709d144eb898654f0f7.png?v=1778060540"},{"product_id":"penta-sata-hat-for-rock-pi-4","title":"PENTA SATA HAT FOR ROCK PI 4","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe PENTA SATA HAT is a specialized expansion module designed for ROCK PI 4 single-board computers that enables direct connection of up to 5 SATA 2.5-inch or 3.5-inch hard drives or solid-state drives through a dedicated SATA interface. Systems integrators, NAS developers, and embedded storage solution architects use this HAT to build high-capacity network-attached storage systems and data backup appliances with enterprise-grade reliability. This product solves the critical limitation of ROCK PI 4's single storage interface by providing multiple independent SATA channels, eliminating the need for external USB enclosures and enabling direct kernel-level drive management with superior I\/O performance.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eSATA Expansion HAT for ROCK PI 4\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003ePENTA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSATA Ports\u003c\/td\u003e \u003ctd\u003e5x SATA 3.0 (6 Gbps) connectors\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface\u003c\/td\u003e \u003ctd\u003ePCIe x4 through ROCK PI 4 expansion connector\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Input\u003c\/td\u003e \u003ctd\u003e12V\/5V dual rail, 4-pin connector, 30W maximum\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHot-Swap Support\u003c\/td\u003e \u003ctd\u003eFull AHCI hot-swap capability on all ports\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDrive Compatibility\u003c\/td\u003e \u003ctd\u003e2.5-inch and 3.5-inch SATA HDD\/SSD\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eForm Factor\u003c\/td\u003e \u003ctd\u003eStackable HAT with standard ROCK PI 4 GPIO alignment\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose PENTA SATA HAT FOR ROCK PI 4?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of PENTA SATA HAT FOR ROCK PI 4\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eFive Independent SATA 3.0 Channels delivering 6 Gbps per port for parallel multi-drive access without bandwidth sharing or bottlenecking\u003c\/li\u003e \u003cli\u003eIntegrated Power Distribution with separate 12V and 5V rails providing stable voltage delivery to enterprise-grade 3.5-inch hard drives without external PSU dependency\u003c\/li\u003e \u003cli\u003eFull AHCI Protocol Compliance enabling native Linux kernel SATA drivers with zero proprietary firmware overhead and maximum OS compatibility\u003c\/li\u003e \u003cli\u003eHot-Swap Ready Architecture supporting live drive insertion and removal without system shutdown, critical for unattended NAS and surveillance applications\u003c\/li\u003e \u003cli\u003eESD Protection Circuitry on all SATA signal lines safeguarding against electrostatic discharge damage during field installation and maintenance\u003c\/li\u003e \u003cli\u003eThermal Management Design with heatsink mounting provisions and optimized PCB layout for sustained reliable operation in high-ambient-temperature environments\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eNetwork-Attached Storage (NAS) Systems: Build 5-bay NAS appliances with ROCK PI 4 for small office backup, media streaming, and file sharing with Linux-native ZFS or Btrfs filesystem support\u003c\/li\u003e \u003cli\u003eSurveillance and Video Recording: Deploy continuous video recording systems with five independent SATA drives for multi-camera surveillance with hardware RAID-5 redundancy\u003c\/li\u003e \u003cli\u003eData Backup Appliances: Create automated backup solutions for small enterprises with scheduled SATA drive mirroring and incremental backup capabilities\u003c\/li\u003e \u003cli\u003eEmbedded Storage Servers: Develop custom storage solutions for IoT gateways, edge computing nodes, and industrial data logging with direct kernel-level drive management\u003c\/li\u003e \u003cli\u003eMedia Server Infrastructure: Build Plex, Kodi, or Jellyfin media servers with multi-terabyte storage capacity and independent drive cooling\u003c\/li\u003e \u003cli\u003eResearch and Development: Enable computer science students and embedded systems engineers to prototype advanced storage architectures and filesystem experiments\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eInstallation begins by powering off your ROCK PI 4 and locating the 40-pin GPIO expansion header on the board's top surface. Carefully align the PENTA SATA HAT's connector with the GPIO pins, ensuring proper orientation with the PCB facing upward, then press firmly until the connector seats completely. Connect your external 12V\/5V power supply to the 4-pin power connector on the HAT, ensuring correct polarity (typically red for 12V positive, black for ground). Once powered, insert your SATA drives into each of the five ports and boot your ROCK PI 4 system. The Linux kernel will automatically detect all connected drives as \/dev\/sda through \/dev\/sde without requiring driver installation or firmware updates.\u003c\/p\u003e\u003cp\u003eFor optimal performance, configure your storage using Linux native tools: use fdisk or parted for partitioning, then format with ext4 for general-purpose use or ZFS\/Btrfs for advanced features like snapshots and RAID. If implementing RAID-5 redundancy, use mdadm to create a software RAID array across all five drives, providing fault tolerance with one drive failure tolerance. For NAS applications, install Samba for Windows file sharing or NFS for Linux\/Unix clients. Monitor drive health using smartmontools (smartctl command) to track SMART attributes and predict drive failures before data loss occurs. Enable thermal monitoring in your operating system to ensure drives remain below 45 degrees Celsius during sustained operation; if temperatures exceed this, add a fan or improve case ventilation.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe PENTA SATA HAT operates by leveraging the ROCK PI 4's PCIe interface through a dedicated expansion connector, providing five independent SATA 3.0 (6 Gbps) channels with full hot-swap capability and individual power management. The HAT includes an onboard power distribution circuit with separate 12V and 5V rails, allowing simultaneous operation of multiple high-capacity drives without voltage sag. Each SATA port features independent signal conditioning and ESD protection, ensuring reliable data transfer even in electrically noisy industrial environments. The module integrates seamlessly with Rockchip's RK3399 processor architecture, supporting full AHCI (Advanced Host Controller Interface) compliance for native Linux kernel driver compatibility without requiring proprietary firmware modifications.\u003c\/p\u003e\u003cp\u003eThis expansion HAT is engineered with a stackable form factor that maintains compatibility with other ROCK PI 4 accessories through intelligent connector placement. The PCB design incorporates multi-layer routing with controlled impedance traces for SATA signal integrity, critical for maintaining 6 Gbps transfer rates across all five channels simultaneously. Power delivery is handled through a robust 4-pin connector that supports up to 30W total power distribution, sufficient for driving five 3.5-inch enterprise-class hard drives under sustained load. The module includes thermal management features with mounting provisions for passive heatsinks, essential for continuous reliable NAS or surveillance recording applications where drive thermal stress is a primary reliability concern.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eCan I use the PENTA SATA HAT with other single-board computers besides ROCK PI 4?\u003c\/summary\u003e \u003cp\u003eNo, this HAT is specifically designed for ROCK PI 4's PCIe expansion interface and GPIO connector pinout. While other boards like Raspberry Pi or Orange Pi may have similar form factors, they lack the necessary PCIe interface and power delivery specifications. Using this HAT on incompatible boards will result in no drive detection and potential hardware damage. Always verify your board's specifications match the PENTA SATA HAT documentation before purchase.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum total data transfer rate when all five SATA drives are accessed simultaneously?\u003c\/summary\u003e \u003cp\u003eThe PENTA SATA HAT provides five independent SATA 3.0 channels, each capable of 6 Gbps (750 MB\/s theoretical maximum). When all five drives are accessed in parallel, the theoretical combined bandwidth is 30 Gbps. However, the actual throughput depends on your ROCK PI 4's PCIe x4 interface bandwidth (approximately 4 GB\/s), which serves as the system bottleneck. In practice, expect 400-600 MB\/s aggregate throughput during sustained multi-drive sequential operations, with higher speeds achievable during random I\/O patterns.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDo I need an external power supply for the SATA drives, or can the ROCK PI 4 power adapter handle everything?\u003c\/summary\u003e \u003cp\u003eThe ROCK PI 4's standard 5V power adapter is insufficient for powering multiple SATA drives. The PENTA SATA HAT requires a dedicated 12V\/5V power supply capable of delivering at least 30W total power. For 3.5-inch hard drives, each drive draws approximately 0.5A at 12V during operation, so five drives require a minimum 2.5A at 12V plus additional 5V current for logic circuits. We recommend using a quality 12V\/5V dual-rail power supply rated for at least 5A at 12V. The 4-pin connector on the HAT accepts standard ATX power connectors or custom barrel connectors depending on your power supply.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes the PENTA SATA HAT support RAID functionality?\u003c\/summary\u003e \u003cp\u003eThe HAT itself does not include onboard RAID controller hardware. However, Linux software RAID (mdadm) fully supports all five drives for RAID-0, RAID-1, RAID-5, and RAID-6 configurations. RAID-5 with five drives provides excellent reliability (one drive failure tolerance) with 80 percent storage efficiency. RAID-6 offers two-drive failure tolerance with 60 percent efficiency. Software RAID performance on ROCK PI 4 is adequate for NAS and backup applications, though CPU load increases during rebuild operations. For enterprise-grade RAID with hardware acceleration, consider external RAID enclosures with dedicated controllers.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I hot-swap drives while the system is running?\u003c\/summary\u003e \u003cp\u003eYes, the PENTA SATA HAT fully supports AHCI hot-swap protocol. You can safely remove and insert drives without powering down the system. However, if the drive is currently mounted and in active use, the filesystem will experience I\/O errors. Always unmount the drive first using the umount command, wait for the system to confirm the unmount, then physically remove the drive. After insertion, the kernel will automatically detect the new drive and you can remount or partition it as needed. This capability is essential for NAS and surveillance systems requiring unattended operation.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhen will I receive my order?\u003c\/summary\u003e \u003cp\u003e\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your PENTA SATA HAT FOR ROCK PI 4 today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy PENTA SATA HAT FOR ROCK PI 4 Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/raspberry-pi\"\u003eRaspberry Pi \u0026amp; SBC\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743620935937,"sku":"TTD-8072","price":10210.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/b797deec94b601eb4d822d0eb5fdba34.png?v=1778060547"},{"product_id":"gesture-r-shield","title":"Gesture R Shield","description":"\u003cp\u003eGesture R Shield\u003c\/p\u003e\u003ch2\u003eWhy Choose Gesture R Shield?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eYes — message us on WhatsApp for bulk or business pricing on Gesture R Shield.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Gesture R Shield today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Gesture R Shield Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743621460225,"sku":"TTD-8077","price":4025.88,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/a17b8a2290172e088d15b7b74bf515c3.jpg?v=1778060553"},{"product_id":"arduino-mega-proto-shield-rev3","title":"Arduino MEGA Proto Shield Rev3","description":"\u003cp\u003eThe Arduino MEGA Proto Shield Rev3 is a arduino + microcontroller component used by makers, students and engineers for electronics and embedded-systems projects.\u003c\/p\u003e\u003cp\u003eArduino MEGA Proto Shield Rev3\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eCompatible Board\u003c\/td\u003e \u003ctd\u003eArduino MEGA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRevision\u003c\/td\u003e \u003ctd\u003eRev3\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eType\u003c\/td\u003e \u003ctd\u003ePrototyping shield\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Arduino MEGA Proto Shield Rev3?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Arduino MEGA Proto Shield Rev3\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eStacks directly onto an Arduino MEGA for solder-based prototyping\u003c\/li\u003e \u003cli\u003ePrototyping area lets you add custom components without a separate PCB\u003c\/li\u003e \u003cli\u003eRev3 shield footprint matches the standard Arduino MEGA pin layout\u003c\/li\u003e \u003cli\u003eUseful step between breadboard testing and a finished custom shield\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eRapid prototyping on top of an existing Arduino board without extra breadboard wiring\u003c\/li\u003e \u003cli\u003eAdding a specific capability (motor control, extra proto space, connectivity) to a maker project\u003c\/li\u003e \u003cli\u003eClassroom and workshop demonstrations of shield-based expansion\u003c\/li\u003e \u003cli\u003eGeneral-purpose embedded-systems prototyping for makers and engineering students\u003c\/li\u003e \u003cli\u003ePrototyping a custom circuit on top of an Arduino MEGA\u003c\/li\u003e\n\u003cli\u003eBuilding a semi-permanent add-on board for a MEGA-based project\u003c\/li\u003e\n\u003cli\u003eEducational electronics projects needing solder practice\u003c\/li\u003e\n\u003cli\u003eMoving a breadboard circuit to a more durable stacked shield\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk \/ wholesale pricing?\u003c\/summary\u003e\u003cp\u003eYes — for bulk enquiries, WhatsApp us at +91 78285 34155.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Arduino MEGA Proto Shield Rev3 today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Arduino MEGA Proto Shield Rev3 Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/arduino\"\u003eArduino\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743622541569,"sku":"TTD-8087","price":750.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/319f1232f022d0b60c413d917cce74db.jpg?v=1778060566"},{"product_id":"arduino-mkr-relay-proto-shield","title":"Arduino MKR Relay Proto Shield","description":"\u003cp\u003eThe Arduino MKR Relay Proto Shield is a versatile expansion board designed for Arduino MKR-series microcontrollers, enabling seamless integration of relay-based switching and prototyping capabilities in a compact form factor. Professional automation engineers, IoT developers, and industrial control specialists use this shield to rapidly prototype relay-driven applications including smart home systems, industrial automation, and remote device switching without extensive custom PCB design. This shield solves the critical problem of adding high-current switching capability and breadboard-compatible prototyping space to Arduino MKR boards while maintaining signal integrity and electrical isolation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eArduino MKR Expansion Shield with Integrated Relay\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eArduino\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Boards\u003c\/td\u003e \u003ctd\u003eArduino MKR WiFi 1010, MKR Zero, MKR 1000, MKR Vidor 4000\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRelay Type\u003c\/td\u003e \u003ctd\u003eSingle Channel SPDT (Single Pole Double Throw)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRelay Coil Voltage\u003c\/td\u003e \u003ctd\u003e5V DC\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaximum Load Capacity\u003c\/td\u003e \u003ctd\u003e10A at 250VAC or 30VDC\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProto Area\u003c\/td\u003e \u003ctd\u003eStandard breadboard-compatible grid layout\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature\u003c\/td\u003e \u003ctd\u003e-20 to 70 degrees Celsius\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003cul\u003e\n\u003cli\u003e \u003cstrong\u003eProduct Type:\u003c\/strong\u003e Arduino MKR Expansion Shield with Integrated Relay\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eBrand:\u003c\/strong\u003e Arduino\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eCompatible Boards:\u003c\/strong\u003e Arduino MKR WiFi 1010, MKR Zero, MKR 1000, MKR Vidor 4000\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eRelay Type:\u003c\/strong\u003e Single Channel SPDT (Single Pole Double Throw)\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eRelay Coil Voltage:\u003c\/strong\u003e 5V DC\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eMaximum Load Capacity:\u003c\/strong\u003e 10A at 250VAC or 30VDC\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eProto Area:\u003c\/strong\u003e Standard breadboard-compatible grid layout\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -20 to 70 degrees Celsius\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose Arduino MKR Relay Proto Shield?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Arduino MKR Relay Proto Shield\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eIntegrated Single-Channel Relay with SPDT configuration providing 10A switching capacity at both AC and DC loads, enabling control of high-power devices directly from Arduino logic signals\u003c\/li\u003e \u003cli\u003eFull MKR Pin Breakout with all digital, analog, PWM, and communication pins accessible on the proto area, facilitating rapid prototyping without additional wiring harnesses\u003c\/li\u003e \u003cli\u003eBreadboard-Compatible Prototyping Space with clearly marked power and ground rails, allowing direct component insertion and circuit experimentation without soldering\u003c\/li\u003e \u003cli\u003eElectrical Isolation and Protection featuring optocoupler isolation and integrated diode protection against inductive spikes, safeguarding the microcontroller from relay-induced voltage transients\u003c\/li\u003e \u003cli\u003eCompact Form Factor maintaining full MKR shield compatibility while adding minimal height, enabling stacking with other shields for multi-functional applications\u003c\/li\u003e \u003cli\u003eLED Status Indicator showing relay activation state in real-time, providing visual feedback during debugging and operation monitoring\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eSmart Home Automation Systems where the shield controls AC lighting, ceiling fans, water pumps, and HVAC systems through Arduino-based home automation platforms with remote smartphone or voice control integration\u003c\/li\u003e \u003cli\u003eIndustrial Process Control and Machine Automation enabling Arduino MKR boards to trigger solenoid valves, motor starters, pneumatic actuators, and alarm systems in manufacturing and process automation environments\u003c\/li\u003e \u003cli\u003eEnvironmental Monitoring with Automated Response implementing sensor-triggered relay switching for greenhouse climate control, irrigation systems, and weather-responsive building automation\u003c\/li\u003e \u003cli\u003eRenewable Energy Systems and Battery Management where the relay switches between solar panels, battery banks, and grid power based on Arduino-controlled logic, enabling intelligent energy distribution\u003c\/li\u003e \u003cli\u003eSecurity and Access Control Systems integrating door locks, gate openers, and alarm sirens with Arduino-based security logic for automated facility access management\u003c\/li\u003e \u003cli\u003eLaboratory Equipment Control and Test Automation using the shield to automate power switching for test equipment, data acquisition systems, and experimental apparatus in research environments\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by inserting the Arduino MKR Relay Proto Shield onto your Arduino MKR board, ensuring all pins align properly with the header connectors. The shield connects directly to the MKR board without additional configuration. Connect your load device (AC appliance, DC motor, or solenoid) to the relay terminals marked NO (Normally Open) and COM (Common), and connect the power source for your load to the appropriate relay terminal. In your Arduino sketch, configure the relay control pin as a digital output using pinMode(relayPin, OUTPUT), then use digitalWrite(relayPin, HIGH) to energize the relay and activate the load, or digitalWrite(relayPin, LOW) to de-energize and disconnect the load.\u003c\/p\u003e\u003cp\u003eFor prototyping additional circuits, utilize the breadboard-compatible proto area by inserting resistors, capacitors, sensors, and other components directly into the grid holes. Connect component leads to the labeled power rails and signal lines using the MKR pin breakouts. Always verify that your load voltage and current ratings do not exceed the relay specifications (10A maximum at 250VAC or 30VDC) to prevent relay damage. For AC loads, ensure proper grounding and use appropriate electrical safety practices. Include a 1000µF capacitor across the relay coil terminals to suppress inductive spikes if experiencing erratic behavior, and test your circuit with a multimeter before connecting high-voltage loads.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Arduino MKR Relay Proto Shield combines integrated relay switching functionality with a dedicated prototyping area, allowing developers to add external components directly on the shield without additional breadboards. The shield features a high-quality relay module that provides electrical isolation between the control circuit and load circuit, protecting the Arduino microcontroller from inductive kickback and voltage spikes. The relay operates at 5V logic level, making it directly compatible with Arduino MKR digital outputs, while supporting load switching up to 10A at 250VAC or 30VDC, suitable for controlling AC appliances, DC motors, and solenoid valves in industrial applications.\u003c\/p\u003e\u003cp\u003eThe proto area includes a standard breadboard-style grid layout with clearly marked power and ground rails, enabling rapid circuit prototyping without soldering. All MKR-series pins are broken out to the proto area with labeled headers, providing direct access to analog inputs, digital I\/O, PWM outputs, and communication interfaces. The shield's compact design maintains full compatibility with Arduino MKR WiFi 1010, MKR Zero, MKR 1000, and other MKR-family boards, making it an essential tool for developers building intelligent switching systems, environmental monitoring with relay-triggered alerts, and autonomous control applications.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eCan the Arduino MKR Relay Proto Shield control AC appliances directly?\u003c\/summary\u003e \u003cp\u003eYes, the integrated relay is rated for 10A at 250VAC, making it suitable for controlling standard household AC appliances including lights, fans, heaters, and pumps. However, always follow proper electrical safety practices, use appropriate wire gauges for your load current, and ensure the relay terminals are properly insulated to prevent accidental contact with high voltage. For safety-critical applications, consider adding external fuses or circuit breakers in series with the load.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the difference between NO and COM terminals on the relay?\u003c\/summary\u003e \u003cp\u003eThe relay features SPDT (Single Pole Double Throw) configuration with three terminals: COM (Common), NO (Normally Open), and NC (Normally Closed). When the relay is de-energized, the COM terminal connects to NC. When energized, COM switches to NO. For typical load switching, connect your load between COM and NO terminals, so the load is off when the relay is de-energized and on when energized. The NC terminal can be used for monitoring or controlling a secondary circuit that operates opposite to the primary load.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I stack multiple shields on a single Arduino MKR board?\u003c\/summary\u003e \u003cp\u003eThe Arduino MKR Relay Proto Shield is designed as a single-layer expansion board and can technically be stacked with other compatible MKR shields if pin conflicts are avoided. However, the proto area may become crowded, and you should carefully plan which pins each shield uses. For applications requiring multiple relays, consider using external relay modules connected via GPIO pins rather than stacking multiple shields, which provides better organization and easier troubleshooting.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs the relay isolated from the Arduino microcontroller?\u003c\/summary\u003e \u003cp\u003eYes, the relay includes optocoupler isolation that electrically separates the Arduino control circuit from the relay coil and load circuit. This isolation protects the microcontroller from voltage spikes and noise generated by the relay switching, which is critical when controlling inductive loads like motors or solenoids. The isolation also allows the relay to switch loads at different voltage levels than the Arduino's 5V logic supply.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat happens if I exceed the relay's current rating?\u003c\/summary\u003e \u003cp\u003eExceeding the 10A maximum current rating will cause the relay contacts to overheat, leading to contact erosion, increased resistance, arcing, and eventual relay failure. In severe cases, the contacts may weld together, making the relay permanently stuck in the on position. Always calculate your load current before connecting it to the relay, use a multimeter to verify actual current draw, and consider using an external contactor for loads exceeding 10A.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Arduino MKR Relay Proto Shield today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Arduino MKR Relay Proto Shield Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/arduino\"\u003eArduino\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743622607105,"sku":"TTD-8088","price":2300.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/0265fa1457f751ca57f3f770dd3aa751.jpg?v=1778060567"},{"product_id":"arduino-mkr-proto-shield-large","title":"Arduino MKR Proto Shield Large","description":"\u003cp\u003eThe Arduino MKR Proto Shield Large is a arduino + microcontroller component used by makers, students and engineers for electronics and embedded-systems projects.\u003c\/p\u003e\u003cp\u003eArduino MKR Proto Shield Large\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eMKR Proto Shield\u003c\/strong\u003e is a prototyping shield designed for your MKR board. This shield easily plugs onto your MKR using its provided female\/male headers, and offers a duplicate breakout for each pin on the board along with many solderable through-holes on a standard 0.1” grid (2.54mm).\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eNote: You can check schematics in the attachment section \u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003cem\u003eNote: Actual product may vary from image in terms of shape, size design \u0026amp; color.\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eCompatible Board Family\u003c\/td\u003e \u003ctd\u003eArduino MKR series\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSize\u003c\/td\u003e \u003ctd\u003eLarge\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eType\u003c\/td\u003e \u003ctd\u003ePrototyping shield\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Arduino MKR Proto Shield Large?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Arduino MKR Proto Shield Large\u003c\/h2\u003e\u003col\u003e \u003cli\u003eEasy to Use\u003c\/li\u003e \u003cli\u003eEasy to install\u003c\/li\u003e \u003cli\u003eGood quality Product\u003c\/li\u003e \u003cli\u003eStacks directly onto Arduino MKR-family boards for solder-based prototyping\u003c\/li\u003e\n\u003cli\u003eLarger prototyping area than the standard MKR shield for bigger circuits\u003c\/li\u003e\n\u003cli\u003eMatches the compact MKR form factor and pin layout\u003c\/li\u003e\n\u003cli\u003eUseful step between breadboard testing and a finished custom shield\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eRapid prototyping on top of an existing Arduino board without extra breadboard wiring\u003c\/li\u003e \u003cli\u003eAdding a specific capability (motor control, extra proto space, connectivity) to a maker project\u003c\/li\u003e \u003cli\u003eClassroom and workshop demonstrations of shield-based expansion\u003c\/li\u003e \u003cli\u003eGeneral-purpose embedded-systems prototyping for makers and engineering students\u003c\/li\u003e \u003cli\u003ePrototyping a custom circuit on top of an Arduino MKR board\u003c\/li\u003e\n\u003cli\u003eIoT and low-power projects built on the MKR platform\u003c\/li\u003e\n\u003cli\u003eEducational electronics projects needing solder practice\u003c\/li\u003e\n\u003cli\u003eMoving a breadboard circuit to a more durable stacked shield\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e1 x Arduino MKR Proto Shield TSX00001\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk \/ wholesale pricing?\u003c\/summary\u003e\u003cp\u003eYes — for bulk enquiries, WhatsApp us at +91 78285 34155.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Arduino MKR Proto Shield Large today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Arduino MKR Proto Shield Large Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/arduino\"\u003eArduino\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743622803713,"sku":"TTD-8090","price":1330.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/92e2b88c7ea83db074ecb2efd98060d7.jpg?v=1778060570"},{"product_id":"arduino-mkr-proto-shield","title":"Arduino MKR Proto Shield","description":"\u003cp\u003eThe Arduino MKR Proto Shield is a dedicated prototyping expansion board designed specifically for Arduino MKR-series microcontrollers, providing a breadboard-compatible prototyping area with integrated power distribution and signal routing. Electronics engineers, IoT developers, and embedded systems professionals use this shield to rapidly prototype circuits without soldering, significantly reducing development time from concept to functional prototype. It solves the critical problem of extending limited onboard I\/O pins and providing a standardized interface for component integration while maintaining signal integrity and power delivery stability.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eArduino MKR Expansion Shield with Integrated Breadboard\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eArduino\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Boards\u003c\/td\u003e \u003ctd\u003eArduino MKR WiFi 1010, MKR Zero, MKR1000, MKR GSM 1400, MKR NB 1500, MKR WAN 1300\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBreadboard Capacity\u003c\/td\u003e \u003ctd\u003e400+ tie points for component placement\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rails\u003c\/td\u003e \u003ctd\u003eDual voltage support: 3.3V and 5V with independent distribution\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePin Headers\u003c\/td\u003e \u003ctd\u003e22 digital I\/O pins plus 6 analog input pins with labeled silk-screen\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Dimensions\u003c\/td\u003e \u003ctd\u003e61.0mm x 25.4mm (standard MKR form factor)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaterial\u003c\/td\u003e \u003ctd\u003eFR-4 PCB with gold-plated connectors\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003cul\u003e\n\u003cli\u003e \u003cstrong\u003eProduct Type:\u003c\/strong\u003e Arduino MKR Expansion Shield with Integrated Breadboard\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eBrand:\u003c\/strong\u003e Arduino\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eCompatible Boards:\u003c\/strong\u003e Arduino MKR WiFi 1010, MKR Zero, MKR1000, MKR GSM 1400, MKR NB 1500, MKR WAN 1300\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eBreadboard Capacity:\u003c\/strong\u003e 400+ tie points for component placement\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003ePower Rails:\u003c\/strong\u003e Dual voltage support: 3.3V and 5V with independent distribution\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003ePin Headers:\u003c\/strong\u003e 22 digital I\/O pins plus 6 analog input pins with labeled silk-screen\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003ePCB Dimensions:\u003c\/strong\u003e 61.0mm x 25.4mm (standard MKR form factor)\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eMaterial:\u003c\/strong\u003e FR-4 PCB with gold-plated connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose Arduino MKR Proto Shield?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Arduino MKR Proto Shield\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eIntegrated 400-point breadboard with standard 0.1-inch pitch holes for direct component prototyping without soldering or external breadboards\u003c\/li\u003e \u003cli\u003eDual power rail distribution supporting both 3.3V and 5V logic levels with separate voltage regulation for noise isolation and power integrity\u003c\/li\u003e \u003cli\u003eComplete pin mapping with silk-screen labels for all 22 digital I\/O and 6 analog inputs, eliminating reference lookups during development\u003c\/li\u003e \u003cli\u003eStackable design allowing multiple shields to be chained vertically while maintaining full electrical connectivity and signal routing\u003c\/li\u003e \u003cli\u003eGold-plated connectors and contact points ensuring reliable electrical connections with minimal contact resistance and long-term durability\u003c\/li\u003e \u003cli\u003eCompact form factor matching Arduino MKR specifications, enabling integration into space-constrained embedded systems and IoT applications\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eIoT sensor integration and signal conditioning where analog sensors require filtering circuits, voltage dividers, and amplification before ADC conversion on the MKR microcontroller\u003c\/li\u003e \u003cli\u003eReal-time data acquisition systems requiring custom analog front-end circuits with precision resistor networks and capacitive filters for noise reduction in industrial monitoring applications\u003c\/li\u003e \u003cli\u003eEducational prototyping and embedded systems coursework where students rapidly iterate through circuit designs, test component interactions, and validate logic implementations without PCB fabrication delays\u003c\/li\u003e \u003cli\u003eWireless communication projects utilizing MKR WiFi or cellular boards where auxiliary circuits for antenna matching, power management, and signal routing are prototyped before final PCB design\u003c\/li\u003e \u003cli\u003eCustom hardware development for robotics and automation where motor drivers, sensor interfaces, and control logic circuits are validated on the breadboard before production deployment\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eTo begin prototyping with the Arduino MKR Proto Shield, first insert the shield onto your Arduino MKR board by aligning the 22-pin header with the MKR's pin socket and pressing firmly until fully seated. Verify that all pins are properly aligned and the shield sits flush against the MKR board. Next, reference the silk-screen labels on the shield to identify your required I\/O pins and power rails. Insert your electronic components into the breadboard holes, ensuring that components requiring the same signal are placed in the same vertical column or horizontal row as appropriate for your circuit topology.\u003c\/p\u003e\u003cp\u003eWhen wiring your prototype circuit, use solid 22-gauge hookup wire or component leads to create connections between breadboard holes. Connect power and ground rails to your components first, establishing a stable reference, then route signal lines from the MKR pin headers through your custom circuit. For circuits requiring specific voltage levels, utilize the labeled 3.3V and 5V rails appropriately based on your component specifications. After your prototype is complete, upload your Arduino sketch to the MKR board using the Arduino IDE, ensuring that your pin definitions in code match the physical connections you have created on the breadboard. Test your circuit incrementally, starting with basic functionality before adding complexity, and use a digital multimeter to verify voltage levels and signal continuity at critical nodes.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Arduino MKR Proto Shield features a full-size breadboard integrated into the shield PCB, allowing developers to prototype analog and digital circuits directly on the expansion board while maintaining electrical connectivity with the MKR microcontroller's 22 digital I\/O pins and analog inputs. The shield incorporates dedicated power rails with voltage regulation, ground planes for noise reduction, and clearly labeled pin headers that mirror the MKR board's pinout, enabling seamless signal routing from the microcontroller to prototype components. The breadboard area accommodates standard DIP packages, resistors, capacitors, and other discrete components, making it ideal for sensor integration, signal conditioning circuits, and custom logic implementation.\u003c\/p\u003e\u003cp\u003eWhat distinguishes the MKR Proto Shield is its optimized layout for the Arduino MKR family's compact form factor and its inclusion of multiple power distribution options supporting both 3.3V and 5V logic levels. The shield maintains the MKR board's stackability, allowing additional shields to be mounted above it, and provides clear silk-screen labeling for all pin functions. The breadboard section uses standard 0.1-inch pitch holes, ensuring compatibility with virtually all through-hole electronic components. This design approach eliminates the need for external breadboards and jumper wires, reducing parasitic capacitance and improving signal fidelity in time-sensitive applications like real-time data acquisition and control systems.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum current capacity of the power rails on the MKR Proto Shield?\u003c\/summary\u003e \u003cp\u003eThe power rails can safely deliver up to 500mA at 3.3V and 500mA at 5V, limited by the MKR board's onboard voltage regulators. For applications requiring higher current, implement external power supplies with proper current limiting and use the shield's power rails only for logic-level signals and low-power components. Always verify your total current draw across all connected components to prevent brownout conditions.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I stack multiple Proto Shields on a single Arduino MKR board?\u003c\/summary\u003e \u003cp\u003eYes, the MKR Proto Shield is designed to be stackable. You can mount multiple shields vertically, and each shield will have access to the same I\/O pins through pass-through headers. However, be aware that all shields will share the same pin resources, so you cannot use the same pin on multiple shields simultaneously. Plan your pin allocation carefully across all stacked shields to avoid conflicts.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs the breadboard area on the MKR Proto Shield reusable or does it get damaged during prototyping?\u003c\/summary\u003e \u003cp\u003eThe breadboard area uses standard spring-loaded contacts that are designed for repeated insertion and removal of components. The contacts can typically withstand hundreds of insertions without degradation. However, avoid forcing components into holes or inserting oversized leads, as this may damage the contact springs. The breadboard remains fully functional for the lifetime of the shield and does not degrade with normal use.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes the MKR Proto Shield require any additional libraries or configuration in the Arduino IDE?\u003c\/summary\u003e \u003cp\u003eNo, the MKR Proto Shield is a passive expansion board that requires no special libraries or configuration. It simply extends the I\/O accessibility of your Arduino MKR board. Your existing Arduino sketches will work without modification. The shield is entirely transparent to the software layer and functions purely as a hardware interface for prototyping.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Arduino MKR Proto Shield today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Arduino MKR Proto Shield Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/arduino\"\u003eArduino\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743622869249,"sku":"TTD-8091","price":1180.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/d815f644360203c29e036069ff7aace1.jpg?v=1778060571"},{"product_id":"mp3-shield-for-arduino","title":"MP3 Shield  for Arduino","description":"\u003cp\u003eThe MP3 Shield for Arduino is a dedicated audio playback module that enables Arduino microcontrollers to decode and play MP3, WAV, and MIDI audio files from SD cards or flash memory. Professional audio engineers, IoT developers, and embedded systems designers use this shield to add high-quality sound capabilities to robotics projects, home automation systems, and interactive installations. This shield solves the critical challenge of integrating complex audio processing into Arduino-based projects without requiring external audio codecs or complex signal processing.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eAudio Codec Shield for Arduino\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAudio Codec\u003c\/td\u003e \u003ctd\u003eVS1053B Digital Signal Processor\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSupported Formats\u003c\/td\u003e \u003ctd\u003eMP3, OGG, FLAC, WAV, MIDI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCommunication Protocol\u003c\/td\u003e \u003ctd\u003eSPI (Serial Peripheral Interface)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V logic, 5V power input\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAudio Output\u003c\/td\u003e \u003ctd\u003eStereo line-out with onboard amplifier\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSpeaker Output\u003c\/td\u003e \u003ctd\u003eUp to 32 ohms impedance, 100mW power\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSD Card Support\u003c\/td\u003e \u003ctd\u003emicroSD\/SDHC up to 32GB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBitrate Support\u003c\/td\u003e \u003ctd\u003e8kbps to 320kbps MP3, variable bitrate compatible\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVolume Control\u003c\/td\u003e \u003ctd\u003eSoftware controlled, 0-254 levels\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatibility\u003c\/td\u003e \u003ctd\u003eArduino Uno, Mega, Leonardo, Due\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003cul\u003e\n\u003cli\u003e \u003cstrong\u003eProduct Type:\u003c\/strong\u003e Audio Codec Shield for Arduino\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eAudio Codec:\u003c\/strong\u003e VS1053B Digital Signal Processor\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eSupported Formats:\u003c\/strong\u003e MP3, OGG, FLAC, WAV, MIDI\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eCommunication Protocol:\u003c\/strong\u003e SPI (Serial Peripheral Interface)\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 3.3V logic, 5V power input\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eAudio Output:\u003c\/strong\u003e Stereo line-out with onboard amplifier\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eSpeaker Output:\u003c\/strong\u003e Up to 32 ohms impedance, 100mW power\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eSD Card Support:\u003c\/strong\u003e microSD\/SDHC up to 32GB\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eBitrate Support:\u003c\/strong\u003e 8kbps to 320kbps MP3, variable bitrate compatible\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eVolume Control:\u003c\/strong\u003e Software controlled, 0-254 levels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose MP3 Shield for Arduino?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of MP3 Shield for Arduino\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eVS1053B Audio Codec with dedicated DSP for real-time MP3 decoding without CPU overhead\u003c\/li\u003e \u003cli\u003eMulti-format support including MP3, OGG, FLAC, WAV, and MIDI synthesis for versatile audio applications\u003c\/li\u003e \u003cli\u003eOnboard stereo amplifier rated at 100mW per channel, capable of driving 32-ohm speakers directly\u003c\/li\u003e \u003cli\u003emicroSD\/SDHC card slot supporting up to 32GB storage for extensive audio libraries\u003c\/li\u003e \u003cli\u003eSPI communication interface enabling seamless integration with Arduino microcontrollers\u003c\/li\u003e \u003cli\u003eSoftware-controlled volume adjustment with 255 discrete levels for precise audio management\u003c\/li\u003e \u003cli\u003eLow power consumption design requiring only 3.3V logic levels with 5V power supply compatibility\u003c\/li\u003e \u003cli\u003eMIDI synthesis capability for generating musical notes and sound effects programmatically\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eInteractive Educational Kits: Create Arduino-based learning systems with audio feedback, voice prompts, and musical responses for STEM education projects\u003c\/li\u003e \u003cli\u003eRobotics Audio Systems: Implement sound effects, voice alerts, and background music in autonomous robots and robotic arms for enhanced user interaction\u003c\/li\u003e \u003cli\u003eHome Automation Projects: Add doorbell sounds, alarm notifications, and ambient music playback to smart home systems controlled via Arduino\u003c\/li\u003e \u003cli\u003eIoT Audio Devices: Build smart speakers, audio notification systems, and voice-enabled IoT devices with local MP3 playback capabilities\u003c\/li\u003e \u003cli\u003eMusical Instruments and Synthesizers: Create DIY electronic instruments with MIDI synthesis, drum machines, and programmable music sequencers\u003c\/li\u003e \u003cli\u003eAlarm and Alert Systems: Develop customizable alarm systems with multiple audio alerts, voice messages, and priority-based sound notifications\u003c\/li\u003e \u003cli\u003eAmbient Sound Applications: Implement nature sound players, meditation timers, and environmental audio systems for wellness and relaxation projects\u003c\/li\u003e \u003cli\u003eGame Development: Build Arduino-based games with sound effects, background music, and interactive audio feedback mechanisms\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eBegin by stacking the MP3 Shield onto your Arduino microcontroller, ensuring proper alignment of the header pins. Insert a microSD card containing MP3 or WAV files into the onboard card slot. Connect your audio output to powered speakers or headphones using the 3.5mm audio jack. Download and install the VS1053 library into your Arduino IDE from the official repository. Initialize the shield in your sketch using the SPI pins (typically pins 11, 12, 13 for MOSI, MISO, and CLK respectively) and set your chip select pin (usually pin 8 or 9). Use library functions to list files on the SD card, select audio tracks, control playback, and adjust volume levels through software commands.\u003c\/p\u003e\u003cp\u003eTo play audio files, call the appropriate library function with the filename stored on your SD card. The VS1053B codec automatically detects the file format and begins decoding. Monitor playback status using the library's status functions to implement play, pause, stop, and skip controls. For MIDI synthesis, use the MIDI note commands to generate tones at specific frequencies and durations. Implement interrupt handlers for button inputs to create user-friendly playback controls. Always ensure proper power supply to the shield, as insufficient power can cause audio distortion or intermittent playback issues. Test your audio files on the SD card before deployment to ensure compatibility and proper encoding.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe MP3 Shield utilizes the VS1053B audio codec chip, a dedicated digital signal processor (DSP) specifically designed for real-time MP3, OGG, FLAC, WAV, and MIDI decoding. The shield communicates with your Arduino via SPI (Serial Peripheral Interface) protocol, offloading all audio processing tasks from the main microcontroller. This architecture allows your Arduino to handle other critical functions simultaneously while the VS1053B independently manages audio streaming, volume control, and playback operations. The shield includes an onboard SD card slot for storing audio files, stereo audio output with amplification capability, and adjustable volume control through software commands.\u003c\/p\u003e\u003cp\u003eWhat distinguishes this MP3 Shield is its low power consumption, requiring only 3.3V logic levels compatible with most Arduino boards including Arduino Uno, Mega, and Leonardo. The shield features a dedicated audio amplifier capable of driving 32-ohm speakers directly, eliminating the need for external amplification circuits in many applications. The VS1053B codec supports variable bitrate MP3 files, making it ideal for applications requiring flexible storage and playback quality. Additionally, the shield includes MIDI synthesis capabilities, allowing you to generate musical tones and create sound effects programmatically, making it invaluable for educational projects and interactive audio applications.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat audio formats does the MP3 Shield support?\u003c\/summary\u003e \u003cp\u003eThe MP3 Shield with VS1053B codec supports MP3 (8kbps to 320kbps), OGG Vorbis, FLAC, WAV, and MIDI formats. It handles both constant bitrate and variable bitrate MP3 files. For optimal compatibility, we recommend using MP3 files encoded at 128kbps to 192kbps and WAV files at 16-bit, 44.1kHz sample rate.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I connect external speakers or amplifiers to the MP3 Shield?\u003c\/summary\u003e \u003cp\u003eYes, the shield has both line-out and amplified speaker outputs. The onboard amplifier can drive 32-ohm speakers directly at approximately 100mW per channel. For higher power requirements or larger speakers, connect the line-out to an external amplifier. The line-out provides unamplified audio signal suitable for powered speakers or audio amplifier modules.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eHow do I load MP3 files onto the microSD card?\u003c\/summary\u003e \u003cp\u003eUse any computer with an SD card reader to transfer MP3 files to your microSD card. Simply copy the audio files to the root directory or create subdirectories for organization. The shield supports FAT16 and FAT32 file systems. Ensure filenames are properly formatted and the files are valid MP3 or WAV format. Test files on your computer before using them with the shield.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat Arduino boards are compatible with the MP3 Shield?\u003c\/summary\u003e \u003cp\u003eThe MP3 Shield is compatible with Arduino Uno, Arduino Mega, Arduino Leonardo, and Arduino Due. It requires SPI communication pins and a chip select pin. Verify that your specific Arduino board has available SPI pins and a free GPIO pin for chip select before purchase. The shield operates at 3.3V logic levels, so ensure your Arduino supports this voltage or use level shifters.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I control playback using buttons or sensors?\u003c\/summary\u003e \u003cp\u003eAbsolutely. Connect push buttons or sensors to digital input pins on your Arduino. Use interrupt handlers or polling to detect button presses and trigger playback control commands through the VS1053 library. You can implement play, pause, stop, next track, and volume control functions. This enables creation of interactive audio systems with physical user controls.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum SD card size supported?\u003c\/summary\u003e \u003cp\u003eThe MP3 Shield supports microSD and SDHC cards up to 32GB capacity. Cards must be formatted with FAT16 or FAT32 file systems for compatibility. We recommend using Class 10 microSD cards for reliable performance and faster file access. Avoid using SDXC cards as they may have compatibility issues with the shield.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your MP3 Shield for Arduino today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy MP3 Shield for Arduino Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743623000321,"sku":"TTD-8092","price":2310.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/e1bf2ded0e20ed7d75f01af64f293015.jpg?v=1778060572"},{"product_id":"enc28j60-ethernet-adapter-for-arduino","title":"ENC28J60 Ethernet adapter for Arduino","description":"\u003cp\u003eThe ENC28J60 Ethernet adapter for Arduino is a arduino + microcontroller component used by makers, students and engineers for electronics and embedded-systems projects.\u003c\/p\u003e\u003cp\u003eENC28J60 Ethernet adapter for Arduino\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eEthernet Controller: Microchip ENC28J60\u003c\/li\u003e \u003cli\u003eHost Interface: SPI\u003c\/li\u003e \u003cli\u003eNetwork: 10Base-T Ethernet (RJ45)\u003c\/li\u003e \u003c\/ul\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eEthernet Controller IC\u003c\/td\u003e \u003ctd\u003eENC28J60\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface\u003c\/td\u003e \u003ctd\u003eSPI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible MCU\u003c\/td\u003e \u003ctd\u003eArduino\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose ENC28J60 Ethernet adapter for Arduino?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of ENC28J60 Ethernet adapter for Arduino\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eENC28J60 controller adds wired Ethernet to Arduino boards without a native network port\u003c\/li\u003e \u003cli\u003eSPI interface keeps wiring to 4-5 pins plus power\u003c\/li\u003e \u003cli\u003eWorks with the standard Arduino Ethernet\/UIPEthernet libraries\u003c\/li\u003e \u003cli\u003eRJ45 jack for a direct patch-cable connection to a router or switch\u003c\/li\u003e \u003cli\u003eAdds wired 10BASE-T Ethernet connectivity to an Arduino over SPI\u003c\/li\u003e\n\u003cli\u003eLower-cost alternative to W5100-based Ethernet shields\u003c\/li\u003e\n\u003cli\u003eCompact module suits space-constrained networked-Arduino builds\u003c\/li\u003e\n\u003cli\u003eSupported by common Arduino Ethernet\/ENC28J60 libraries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eWired-network Arduino projects where WiFi isn't reliable\u003c\/li\u003e \u003cli\u003eSimple Arduino web servers and IoT nodes over Ethernet\u003c\/li\u003e \u003cli\u003eIndustrial or fixed installations that prefer a wired network link\u003c\/li\u003e \u003cli\u003eAdding wired networking to an Arduino-based project\u003c\/li\u003e\n\u003cli\u003eIoT and home-automation devices needing a stable wired connection\u003c\/li\u003e\n\u003cli\u003eData-logging projects that push readings to a network server\u003c\/li\u003e\n\u003cli\u003eEducational networking and embedded-systems projects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk \/ wholesale pricing?\u003c\/summary\u003e\u003cp\u003eYes — for bulk enquiries, WhatsApp us at +91 78285 34155.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your ENC28J60 Ethernet adapter for Arduino today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy ENC28J60 Ethernet adapter for Arduino Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/arduino\"\u003eArduino\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743623721217,"sku":"TTD-8099","price":480.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/ec6da7f87fe4a77ce5d44a74c074f956.jpg?v=1778060583"},{"product_id":"502ssd-msata-solid-state-drive-shield","title":"502SSD mSATA Solid State Drive Shield","description":"\u003cp\u003eLooking to buy \u003cstrong\u003e502SSD mSATA Solid State Drive Shield\u003c\/strong\u003e at the best price in India? Tech Depot India offers competitive pricing, bulk discounts for orders of 10+ units, and dedicated technical support via email and WhatsApp. Whether you are a hobbyist, student, or professional engineer, we have everything you need for your electronics projects.\u003c\/p\u003e\u003cp\u003e502SSD mSATA Solid State Drive Shield\u003c\/p\u003eThis shield converts one UP USB Host Port to a high capacity mSATA SSD Drive (up to 1TB), Dual USB 2.0 Host Ports and 802.11b\/g\/n WiFi w\/Soft-AP Mode support. Coupled with the high performance UP with Quad Core CPU, the 502SSD creates a low cost, embedded network storage device. The 502SSD includes one shield (Hard Drive not included), WiFi antenna, USB-A to microUSB-B patch cable and mounting hardware for connection to the UP board.Features \u003cul\u003e \u003cli\u003eTwo USB2.0 Type A (5V @ 1.5A power) for additional USB expansion\u003c\/li\u003e \u003cli\u003ePL2571 Controller and mSATA Socket for up to 1TeraByte on-board Storage\u003c\/li\u003e \u003cli\u003eGWF-3M08 Module (Based on Ralink RT5370) provides 802.11b\/g\/n for up to 150Mbps. On-Module IPEX connector allows for optimal antenna placement\u003c\/li\u003e \u003cli\u003eDS1339 Real Time Clock with 16mm Coin Cell Backup and Alarm\u003c\/li\u003e \u003cli\u003e1-Wire DS18B20 Temperature Sensor mounted below SSD to monitor health of drive. Additionally the DS18B20 has a unique 64-Bit ID that can be used to identify the shield for advanced Asset Management\u003c\/li\u003e \u003cli\u003eWide-Input 5V @ 10A powers all peripherals plus the UP board. Additional 5-Pin Header can be used to power the Pi Foundation 7\" Touch LCD w\/I2C\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003eShop online at \u003ca href=\"https:\/\/techdepot.in\"\u003eTech Depot India\u003c\/a\u003e - India's trusted electronics components store. Fast delivery across Bengaluru, Delhi, Hyderabad.\u003c\/p\u003e\u003ch2\u003eWhy Choose 502SSD mSATA Solid State Drive Shield?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eIs technical support available?\u003c\/summary\u003e \u003cp\u003eYes, responsive support via email and WhatsApp for setup, troubleshooting, and application guidance.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your 502SSD mSATA Solid State Drive Shield today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy 502SSD mSATA Solid State Drive Shield Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743625359617,"sku":"TTD-8117","price":12733.52,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/bb7d8ccdececd76225f4b22bdb870971.jpg?v=1778060605"},{"product_id":"mini-shield-for-nanopi-neo-core-core2","title":"Mini Shield for NanoPi NEO Core\/Core2","description":"\u003cp\u003eOur team in Bengaluru is available reliable to support your journey from product selection to project completion.\u003c\/p\u003e\u003cp\u003eThe Mini Shield for NanoPi NEO Core\/Core2 is a compact expansion board designed to extend the GPIO capabilities and add peripheral connectivity to FriendlyElec's ultra-compact single-board computers. IoT developers, embedded systems engineers, and hobbyists use this shield to prototype sensor networks, home automation systems, and edge computing applications without requiring complex wiring or external breadboards. This shield solves the challenge of limited onboard I\/O pins by providing organized pin headers, allowing simultaneous connection of multiple sensors, actuators, and communication modules in a space-constrained form factor.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eGPIO Expansion Shield for NanoPi NEO\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatibility\u003c\/td\u003e \u003ctd\u003eNanoPi NEO Core, NanoPi NEO Core2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConnector Type\u003c\/td\u003e \u003ctd\u003e40-pin dual-row header (2.54mm pitch)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eGPIO Pins Available\u003c\/td\u003e \u003ctd\u003e28 GPIO pins with multiple functions\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCommunication Interfaces\u003c\/td\u003e \u003ctd\u003e2x UART, 1x SPI, 1x I2C, PWM capable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e3.3V logic levels\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions\u003c\/td\u003e \u003ctd\u003e40mm x 40mm (maintains NanoPi footprint)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003eApproximately 8 grams\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaterial\u003c\/td\u003e \u003ctd\u003eFR-4 PCB with gold-plated contacts\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Mini Shield for NanoPi NEO Core\/Core2?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Mini Shield for NanoPi NEO Core\/Core2\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eComplete GPIO Breakout: All 28 GPIO pins from NanoPi NEO Core\/Core2 are broken out to individual headers, enabling simultaneous connection of multiple sensors and actuators without pin conflicts\u003c\/li\u003e \u003cli\u003eDual UART Support: Dedicated headers for UART0 and UART1 interfaces allow serial communication with GPS modules, GSM shields, and wireless modules simultaneously\u003c\/li\u003e \u003cli\u003eI2C and SPI Ready: Pre-routed I2C (400kHz\/1MHz) and SPI (50MHz) headers support standard protocol-based sensors including temperature, humidity, pressure, and accelerometer modules\u003c\/li\u003e \u003cli\u003ePWM Capable Pins: Multiple GPIO pins configured for PWM output enable precise control of motors, LED brightness, and servo actuators for robotics and automation projects\u003c\/li\u003e \u003cli\u003eCompact Stacking Design: Maintains the 40x40mm form factor of NanoPi NEO Core\/Core2, allowing integration into space-constrained enclosures and wearable applications\u003c\/li\u003e \u003cli\u003eGold-Plated Contacts: High-quality gold plating ensures reliable long-term connections and resistance to oxidation in industrial and outdoor deployments\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eIoT Environmental Monitoring: Connect multiple sensors (DHT22, BME680, soil moisture) simultaneously via I2C\/SPI to build distributed weather stations and agricultural monitoring systems\u003c\/li\u003e \u003cli\u003eSmart Home Automation: Control relays, solenoids, and lighting circuits through GPIO pins while maintaining communication with home automation servers via UART\/Ethernet\u003c\/li\u003e \u003cli\u003eIndustrial Edge Computing: Deploy data acquisition systems with multiple analog sensors connected through GPIO expanders and serial interfaces for real-time factory floor monitoring\u003c\/li\u003e \u003cli\u003eRobotics and Drone Projects: Use PWM-capable pins for motor speed control and servo positioning while collecting sensor data from accelerometers and gyroscopes via I2C\u003c\/li\u003e \u003cli\u003eWearable and Portable Devices: The compact form factor enables integration into portable environmental monitors, health trackers, and field data loggers with minimal footprint\u003c\/li\u003e \u003cli\u003eEducational Prototyping: Perfect for teaching embedded systems, IoT, and robotics with hands-on projects that require multiple peripheral connections without complex soldering\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eInstallation is straightforward: align the Mini Shield's 40-pin connector with the NanoPi NEO Core\/Core2's GPIO header and press firmly until fully seated. The shield will sit directly on top of the board with proper alignment. Before connecting any external components, verify the pin labels on the shield silk screen match your project requirements. Consult the NanoPi NEO Core\/Core2 datasheet to confirm GPIO pin functions, as some pins have multiple functions (GPIO, SPI, I2C, UART, PWM) that must be configured in software.\u003c\/p\u003e\u003cp\u003eOnce mounted, connect your sensors and modules to the appropriate headers using standard 2.54mm jumper wires or breadboard-compatible connectors. For I2C devices, connect SDA and SCL pins to the dedicated I2C header along with ground and 3.3V power. For serial communication, use the UART headers with proper TX\/RX cross-connection (TX to RX and vice versa). Always verify voltage levels before connecting components, as the NanoPi operates at 3.3V logic levels. Configure the GPIO pins in your Linux kernel device tree or application code to enable the required peripheral functions (SPI, I2C, UART) before accessing connected devices.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Mini Shield is a passthrough expansion board that maintains the NanoPi NEO Core\/Core2's ultra-compact 40mm x 40mm footprint while breaking out all GPIO pins into easily accessible headers. The shield uses a stacked design with precision-aligned connectors that ensure reliable electrical contact without soldering, allowing developers to quickly prototype and iterate on projects. The board includes silk-screened pin labels for both GPIO and special function pins (SPI, I2C, UART, PWM), eliminating confusion during development and reducing debugging time in production environments.\u003c\/p\u003e\u003cp\u003eThis expansion board is engineered for industrial IoT applications where space and reliability are critical. The Mini Shield supports the full range of NanoPi NEO Core\/Core2 peripherals including multiple UART interfaces, SPI communication, I2C bus, and PWM outputs. The board features a standard 2.54mm pin pitch for compatibility with standard jumper wires and breadboard components, while maintaining the compact vertical stacking profile essential for embedded applications like smart meters, environmental monitoring stations, and distributed sensor networks.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eIs the Mini Shield compatible with both NanoPi NEO Core and Core2?\u003c\/summary\u003e \u003cp\u003eYes, the Mini Shield is fully compatible with both NanoPi NEO Core and NanoPi NEO Core2. Both boards feature identical 40-pin GPIO headers with the same pinout, allowing the shield to work seamlessly with either model. The only difference is the Core2 includes an additional 512MB RAM, but this does not affect GPIO functionality or shield compatibility.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I stack multiple shields on a single NanoPi NEO Core\/Core2?\u003c\/summary\u003e \u003cp\u003eDirect stacking of multiple shields is not recommended as it would block access to the GPIO header. However, you can use GPIO expander chips (like MCP23017) connected via I2C to the Mini Shield to virtually expand your available GPIO pins. Alternatively, use a breadboard or custom PCB to distribute connections from a single shield to multiple peripheral circuits.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat voltage levels does the Mini Shield support?\u003c\/summary\u003e \u003cp\u003eThe Mini Shield operates at 3.3V logic levels, matching the NanoPi NEO Core\/Core2 specifications. All GPIO pins are 3.3V, and connecting 5V sensors directly will damage the board. Use level shifters or voltage dividers when interfacing with 5V devices. The shield provides access to 3.3V and ground pins for powering external components.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eDoes the Mini Shield include pull-up resistors for I2C?\u003c\/summary\u003e \u003cp\u003eThe Mini Shield provides the I2C header pins but does not include onboard pull-up resistors. Most I2C sensors and modules include internal pull-ups, but if you experience communication issues, add external 4.7k ohm pull-up resistors to SDA and SCL lines. Consult your sensor datasheet for specific pull-up requirements.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use the Mini Shield with power supply modules or motor drivers?\u003c\/summary\u003e \u003cp\u003eYes, the shield's GPIO pins can control external power modules and motor drivers. However, ensure that high-current loads are powered through separate power supplies, not through the GPIO pins directly. Use the shield's ground pins to establish common ground between the NanoPi and external circuits. For motor control, connect motor drivers to GPIO pins and power them from a dedicated supply rated for your motor current requirements.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Mini Shield for NanoPi NEO Core\/Core2 today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Mini Shield for NanoPi NEO Core\/Core2 Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743628374273,"sku":"TTD-8161","price":1732.04,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/9df0e4191e8966a9891adf2e8414a5a5.jpg?v=1778060666"},{"product_id":"precision-rtc-module-for-raspberry-pi-pico","title":"Precision RTC Module for Raspberry Pi Pico","description":"\u003cp\u003eThe Precision RTC Module for Raspberry Pi Pico is a Raspberry Pi + Microcontroller product available online in India from Tech Depot India, with a GST invoice on every order.\u003c\/p\u003e\u003cp\u003ePrecision RTC Module for Raspberry Pi Pico\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePrecision RTC Module for Raspberry Pi Pico, Onboard DS3231 Chip\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Pico-RTC-DS3231 is an RTC expansion module specialized for Raspberry Pi Pico. It incorporates high precision RTC chip DS3231 and uses an I2C bus for communication. More external sensors are allowed to be connected thanks to the stackable design.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/techdepot.in\"\u003e\u003cb\u003e\u003cu\u003eUser Manual \/ Datasheet \/ Example Codes Etc.\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eStandard Raspberry Pi Pico header, supports Raspberry Pi Pico series.\u003c\/li\u003e \u003cli\u003eOnboard high precision RTC chip DS3231, with backup battery holder.\u003c\/li\u003e \u003c\/ul\u003e\u003col\u003e \u003cli\u003eReal-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100.\u003c\/li\u003e \u003cli\u003eOptional format: 24-hour OR 12-hour with an AM\/PM indicator.\u003c\/li\u003e \u003cli\u003e2 x programable alarm clock.\u003c\/li\u003e \u003c\/ol\u003e\u003cp\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eOperating voltage: 3.3V\u003c\/li\u003e \u003cli\u003eBackup battery voltage: 2.3V~5.5V\u003c\/li\u003e \u003cli\u003eOperating temperature: -40 degreesC ~ 86 degreesC\u003c\/li\u003e \u003cli\u003ePower consumption: 100nA (sustains data and clock information)\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003eShop online at \u003ca href=\"https:\/\/techdepot.in\"\u003eTech Depot India\u003c\/a\u003e - India's trusted electronics components store. Fast delivery across Bengaluru, Delhi, Hyderabad.\u003c\/p\u003e\u003ch2\u003eWhy Choose Precision RTC Module for Raspberry Pi Pico?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Precision RTC Module for Raspberry Pi Pico\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eKeeps accurate timekeeping independent of the host board's own clock\u003c\/li\u003e \u003cli\u003eRetains the correct date and time across power cycles and reboots\u003c\/li\u003e \u003cli\u003eDesigned to mount directly onto a Raspberry Pi Pico\u003c\/li\u003e \u003cli\u003eRemoves the need for an internet\/NTP connection just to know the current time\u003c\/li\u003e \u003cli\u003eStandard Raspberry Pi Pico header, supports Raspberry Pi Pico series.\u003c\/li\u003e\n\u003cli\u003eOnboard high precision RTC chip DS3231, with backup battery holder.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eData loggers that need accurate timestamps without a network connection\u003c\/li\u003e \u003cli\u003eOffline or field-deployed IoT projects (sensor stations, trackers)\u003c\/li\u003e \u003cli\u003eHome automation schedules and time-based triggers\u003c\/li\u003e \u003cli\u003eAny Raspberry Pi\/Pico project that must remember the time after a power loss\u003c\/li\u003e \u003cli\u003ePrototyping and hobbyist electronics projects\u003c\/li\u003e\n\u003cli\u003eEducational STEM and college project builds\u003c\/li\u003e\n\u003cli\u003eEmbedded-systems and IoT experimentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eIs technical support available?\u003c\/summary\u003e \u003cp\u003eYes, responsive support via email and WhatsApp for setup, troubleshooting, and application guidance.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Precision RTC Module for Raspberry Pi Pico today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Precision RTC Module for Raspberry Pi Pico Online in India\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e Browse more from our \u003ca href=\"\/collections\/raspberry-pi\"\u003eRaspberry Pi \u0026amp; SBC\u003c\/a\u003e collection, or see \u003ca href=\"\/collections\/all\"\u003eall products\u003c\/a\u003e at Tech Depot India.\u003c\/p\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743642267905,"sku":"TTD-8318","price":1780.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/3a4208428a8b8304ccc6f5b1d02ef1b5.jpg?v=1778060852"},{"product_id":"rtc-module-ds3231-3-3v-5v-with-battery-for-raspberry-pi","title":"RTC module DS3231 3.3V\/ 5V with Battery for Raspberry Pi","description":"\u003cp\u003eRTC module DS3231 3.3V\/ 5V with Battery for Raspberry Pi\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDS3231 Real Time Clock Module 3.3V 5V Precise\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe DS3231 Mini RTC is a mini real-time clock module designed for Raspberry Pi, but it can also be used with Arduino. The DS3231 RTC IC can self-adjust to 3.3V and 5V. It provides battery backup for continuous timing and low-power consumption. It has complete clock functions, including seconds, minutes, hours, day, date, month and year timing, and it is valid until 2100.\u003c\/p\u003e\u003cp\u003eIt also has two calendar alarms, 1Hz and 32.768kHz output, reset output and input buttons debounced, and high-speed (400KHz) I2C serial bus. Many RTC modules are designed to operate at 5V, but the Raspberry Pi operates at 3.3V. That is why this module is handy, as it operates at 3.3V, making it perfect for adding an RTC to your Raspberry Pi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eSupply voltage(V)\u003c\/td\u003e \u003ctd\u003e+2.3 to +5.5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eoperating temperature range\u003c\/td\u003e \u003ctd\u003e-40 degreesC to +85 degreesC\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eNumber of calendar alarm\u003c\/td\u003e \u003ctd\u003e2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutput Frequency\u003c\/td\u003e \u003ctd\u003e1Hz and 32.768kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePCB Dimension( mm)\u003c\/td\u003e \u003ctd\u003e14x14x12\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight(g)\u003c\/td\u003e \u003ctd\u003e4\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipment Weight\u003c\/td\u003e \u003ctd\u003e0.005 kg\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e \u003cli\u003eSupported Raspberry Pi and Arduino Within -40 degreesC to +85 degrees C temperature range\u003c\/li\u003e \u003cli\u003eTiming accuracy is maintained at ± 5ppm (± 0.432 sec\/day).\u003c\/li\u003e \u003cli\u003eoperating temperature range:-40 degreesC to +85 degreesC\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eProvide battery backup for continuous timing.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eComplete clock functions include seconds, minutes, hours, day, date, month and year timing, and provide valid to 2100.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eTwo calendar alarm.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e1Hz and 32.768kHz output.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eSize: 14x14x12 mm\u003c\/span\u003e\u003c\/li\u003e \u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1 x DS3231 Real Time Clock Module 3.3V 5V Precise\u003c\/p\u003e\u003cp\u003eShop online at \u003ca href=\"https:\/\/techdepot.in\"\u003eTech Depot India\u003c\/a\u003e - India's trusted electronics components store. Fast delivery across Bengaluru, Delhi, Hyderabad.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e \u003cli\u003e \u003cstrong\u003eSupply voltage(V):\u003c\/strong\u003e +2.3 to +5.5\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eoperating temperature range:\u003c\/strong\u003e -40 degreesC to +85 degreesC\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eNumber of calendar alarm:\u003c\/strong\u003e 2\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eOutput Frequency:\u003c\/strong\u003e 1Hz and 32.768kHz\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePCB Dimension( mm):\u003c\/strong\u003e 14x14x12\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWeight(g):\u003c\/strong\u003e 4\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eShipment Weight:\u003c\/strong\u003e 0.005 kg\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eWhy Choose RTC module DS3231 3.3V\/ 5V with Battery for Raspberry Pi?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eEnvironmental monitoring and IoT data-logging projects\u003c\/li\u003e \u003cli\u003eHome-automation triggers (motion, temperature, gas, proximity) built on Arduino, ESP32 or Raspberry Pi\u003c\/li\u003e \u003cli\u003eRobotics feedback loops and obstacle-avoidance systems\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eIs technical support available?\u003c\/summary\u003e \u003cp\u003eYes, responsive support via email and WhatsApp for setup, troubleshooting, and application guidance.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your RTC module DS3231 3.3V\/ 5V with Battery for Raspberry Pi today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy RTC module DS3231 3.3V\/ 5V with Battery for Raspberry Pi Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743642300673,"sku":"TTD-8319","price":190.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/4ae726b3182bd6ee2023899ce98848f3.jpg?v=1778060853"},{"product_id":"raspberry-pi-rtc-expansion-module-v-1-1","title":"Raspberry Pi RTC Expansion Module V 1.1","description":"\u003cp\u003eRaspberry Pi RTC Expansion Module V 1.1\u003c\/p\u003e\u003ch2\u003eWhy Choose Raspberry Pi RTC Expansion Module V 1.1?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Raspberry Pi RTC Expansion Module V 1.1\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eKeeps accurate timekeeping independent of the host board's own clock\u003c\/li\u003e \u003cli\u003eRetains the correct date and time across power cycles and reboots\u003c\/li\u003e \u003cli\u003eDesigned to mount directly onto a Raspberry Pi\u003c\/li\u003e \u003cli\u003eRemoves the need for an internet\/NTP connection just to know the current time\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eEnvironmental monitoring and IoT data-logging projects\u003c\/li\u003e \u003cli\u003eHome-automation triggers (motion, temperature, gas, proximity) built on Arduino, ESP32 or Raspberry Pi\u003c\/li\u003e \u003cli\u003eRobotics feedback loops and obstacle-avoidance systems\u003c\/li\u003e \u003cli\u003eRapid prototyping on top of an existing Arduino or Raspberry Pi board without extra breadboard wiring\u003c\/li\u003e \u003cli\u003eData loggers that need accurate timestamps without a network connection\u003c\/li\u003e\n\u003cli\u003eOffline or field-deployed IoT projects (sensor stations, trackers)\u003c\/li\u003e\n\u003cli\u003eHome automation schedules and time-based triggers\u003c\/li\u003e\n\u003cli\u003eAny Raspberry Pi\/Pico project that must remember the time after a power loss\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRASPBERRY PI RTC EXPANSION MODULE V1.1, SEEED 114100001\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eZaloga \u003csmall\u003e\u003cspan\u003eDA, 9 kos\/ov pri dobavitelju\u003c\/span\u003e\u003c\/small\u003e \u003c\/li\u003e \u003cli\u003eDobava 7 dni\u003c\/li\u003e \u003cli\u003eZnamka: SEEED STUDIO \u003c\/li\u003e \u003cli\u003eId številka: 1782\/23\u003c\/li\u003e \u003c\/ul\u003e10,76 €\u003cform\u003e \u003clabel for=\"product-quantity\"\u003eKoličina\u003c\/label\u003e \u003cinput id=\"product-quantity_1782\" min=\"1\" type=\"number\" value=\"1\"\u003e \u003cbr\u003e \u003cbr\u003e \u003cbutton onclick=\"check_code(); itemInCart(1782); notifyUser('Raspberry Pi RTC Expansion Module v1.1, SEEED 114100001', 't_5101_ohisja_seeed-studio_raspberry-pi-rtc-expansion-module-v1.1,-seeed-114100001.jpg');\" type=\"button\"\u003eV KOŠARICO\u003c\/button\u003e \u003c\/form\u003e\u003cbutton aria-expanded=\"false\" aria-haspopup=\"true\" data-toggle=\"dropdown\" id=\"dropdownMenuButton\" type=\"button\"\u003e\u003ci\u003e\u003c\/i\u003e Deli \u003c\/button\u003e\u003cp\u003eShop online at \u003ca href=\"https:\/\/techdepot.in\"\u003eTech Depot India\u003c\/a\u003e - India's trusted electronics components store. Fast delivery across Bengaluru, Delhi, Hyderabad.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eIs technical support available?\u003c\/summary\u003e \u003cp\u003eYes, responsive support via email and WhatsApp for setup, troubleshooting, and application guidance.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing on orders of 10+ units. Contact us via WhatsApp or email for a custom quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Raspberry Pi RTC Expansion Module V 1.1 today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Raspberry Pi RTC Expansion Module V 1.1 Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743642366209,"sku":"TTD-8320","price":1120.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/5c7f67508e62501fe55382b563b8dcf2.jpg?v=1778060855"},{"product_id":"wisblock-rak15001-flash-module-gigadevice-gd25q16","title":"WisBlock RAK15001 Flash Module GigaDevice GD25Q16","description":"\u003cp\u003eThe WisBlock RAK15001 is a high-performance flash memory expansion module featuring the GigaDevice GD25Q16 serial NOR flash chip, designed for IoT and embedded systems requiring reliable non-volatile storage. Professional developers and embedded systems engineers use this module to expand data logging, firmware storage, and configuration memory capabilities in RAK WisBlock-based applications. This product solves the critical challenge of limited onboard storage in resource-constrained IoT devices by providing 16 megabits of fast, low-power flash memory with industry-standard SPI interface compatibility.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eWisBlock Flash Memory Expansion Module\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFlash Chip\u003c\/td\u003e \u003ctd\u003eGigaDevice GD25Q16\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStorage Capacity\u003c\/td\u003e \u003ctd\u003e16 Megabits (2 Megabytes)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInterface\u003c\/td\u003e \u003ctd\u003eSerial Peripheral Interface (SPI)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMax Clock Speed\u003c\/td\u003e \u003ctd\u003e50 MHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRead Speed\u003c\/td\u003e \u003ctd\u003eUp to 50 Mbps\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWrite Speed\u003c\/td\u003e \u003ctd\u003eUp to 25 Mbps\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSector Size\u003c\/td\u003e \u003ctd\u003e4 KB (512 sectors total)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Voltage\u003c\/td\u003e \u003ctd\u003e2.7V to 3.6V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStandby Current\u003c\/td\u003e \u003ctd\u003eLess than 10 microamps\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature\u003c\/td\u003e \u003ctd\u003e-40°C to +85°C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eForm Factor\u003c\/td\u003e \u003ctd\u003eWisBlock Standard Module\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eRAK Wireless \/ GigaDevice\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose WisBlock RAK15001 Flash Module GigaDevice GD25Q16?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of WisBlock RAK15001 Flash Module GigaDevice GD25Q16\u003c\/h2\u003e\u003cul\u003e \u003cli\u003e16 Megabit Serial NOR Flash Memory with GigaDevice GD25Q16 chip providing reliable non-volatile storage for IoT applications and embedded systems\u003c\/li\u003e \u003cli\u003e50 MHz SPI Interface enabling fast read\/write operations with configurable clock speeds to match microcontroller performance requirements\u003c\/li\u003e \u003cli\u003eUltra-Low Power Consumption with standby current below 10 microamps, ideal for battery-powered and energy-harvesting IoT deployments\u003c\/li\u003e \u003cli\u003e512 Sectors of 4KB each allowing granular data management for sensor logging, firmware storage, and configuration parameter persistence\u003c\/li\u003e \u003cli\u003eWisBlock Standard Connector providing plug-and-play integration with RAK WisBlock development boards without soldering or complex PCB modifications\u003c\/li\u003e \u003cli\u003eExtended Temperature Range from -40°C to +85°C supporting industrial and harsh environment applications\u003c\/li\u003e \u003cli\u003eWrite Protection and Status Register Controls ensuring data integrity and preventing accidental overwrites during system operation\u003c\/li\u003e \u003cli\u003eStandard SPI Command Set supporting read, write, erase, and program operations compatible with industry-standard microcontroller libraries\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eEnvironmental Data Logging: Store continuous sensor readings from temperature, humidity, and air quality sensors with timestamp information for long-term environmental monitoring and analysis\u003c\/li\u003e \u003cli\u003eFirmware Over-The-Air Updates: Maintain dual firmware images or staging areas for OTA update operations in remote IoT devices without requiring external storage infrastructure\u003c\/li\u003e \u003cli\u003eConfiguration and Calibration Data: Persist device-specific parameters, calibration coefficients, and user settings that survive power cycles and system resets\u003c\/li\u003e \u003cli\u003eTime-Series Data Collection: Buffer accelerometer, gyroscope, and pressure sensor data for wearables and motion tracking applications before cloud transmission\u003c\/li\u003e \u003cli\u003eEvent Logging and Diagnostics: Record system events, error codes, and operational metrics for post-mortem analysis and remote device troubleshooting\u003c\/li\u003e \u003cli\u003eMachine Learning Model Storage: Store lightweight neural network weights and inference models for edge AI applications on resource-constrained IoT platforms\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eTo integrate the WisBlock RAK15001 Flash Module into your project, first identify the appropriate WisBlock slot on your RAK development board designated for IO expansion modules. Insert the module into the connector with the component side facing upward, ensuring proper alignment with the keyed connector pins. The module will automatically establish SPI communication through the standardized WisBlock bus without requiring additional wiring or configuration jumpers. In your firmware, initialize the SPI peripheral with a clock speed between 1 MHz and 50 MHz depending on your microcontroller capabilities and desired performance, then use standard SPI commands to read, write, and erase flash sectors.\u003c\/p\u003e\u003cp\u003eConfigure your microcontroller's SPI master interface with CPOL=0 and CPHA=0 timing modes, which are standard for GigaDevice flash chips. Use the chip select (CS) pin connected through the WisBlock bus to frame SPI transactions, sending command bytes followed by address and data bytes as required by the GD25Q16 datasheet. Implement sector-level erase operations before writing new data, as the GD25Q16 requires erased memory (all bits set to 1) before programming. Monitor the write-in-progress (WIP) bit in the status register to ensure erase and program operations complete before initiating subsequent commands, preventing data corruption from interrupted writes.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe WisBlock RAK15001 Flash Module integrates the GigaDevice GD25Q16 serial NOR flash memory chip on a standardized WisBlock connector form factor, enabling plug-and-play expansion of storage capacity in RAK WisBlock development boards and custom IoT solutions. The GD25Q16 operates using the Serial Peripheral Interface (SPI) protocol, delivering read speeds up to 50 MHz with configurable clock frequencies to match your microcontroller capabilities. This module excels in applications requiring frequent data updates, sensor logging, and firmware over-the-air (OTA) update support, with ultra-low standby current consumption ideal for battery-powered deployments.\u003c\/p\u003e\u003cp\u003eThe flash memory architecture supports standard SPI commands including read, write, erase, and program operations with sector-level granularity, allowing precise data management and efficient memory utilization. The GD25Q16 features 512 sectors of 4KB each, enabling flexible data organization for logging timestamps, sensor readings, configuration parameters, and application firmware. Built-in write protection mechanisms and status register controls provide data integrity safeguards, while the module's compact WisBlock form factor maintains system modularity and simplifies integration into existing RAK ecosystems without requiring complex PCB redesign.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the difference between the GD25Q16 and other flash chips in the GigaDevice lineup?\u003c\/summary\u003e \u003cp\u003eThe GD25Q16 provides 16 megabits of storage with a 50 MHz maximum clock speed and standard SPI interface, making it ideal for moderate-capacity storage applications. Compared to smaller chips like GD25Q10 (1 megabit), it offers 16x more storage for complex logging and firmware scenarios. Compared to larger variants like GD25Q32 (32 megabits), it consumes less power and board space while remaining sufficient for most IoT applications. The GD25Q16 strikes an optimal balance between capacity, power consumption, and cost for WisBlock-based systems.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use this module for storing executable firmware or only data?\u003c\/summary\u003e \u003cp\u003eThe GD25Q16 is a data flash memory, not a code flash memory designed for direct execution. You can store firmware images for over-the-air updates, bootloader code, or application binaries that are read and copied to executable RAM or code flash during boot. Many IoT applications use this module as a staging area for new firmware versions, with the bootloader reading from this flash and programming the main code flash only after verification. This approach enables secure firmware updates without requiring external programming equipment.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the expected lifespan of the GD25Q16 in terms of write cycles?\u003c\/summary\u003e \u003cp\u003eThe GigaDevice GD25Q16 is rated for a minimum of 100,000 program\/erase cycles per sector, which is typical for commercial-grade serial NOR flash. For most IoT applications with occasional configuration updates or periodic data logging, this lifespan exceeds 10 years of continuous operation. If your application requires frequent writes to the same sectors, implement wear-leveling algorithms that distribute writes across multiple sectors to maximize flash longevity. Monitor write patterns during development to ensure your application doesn't exceed sustainable write frequencies.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eIs the WisBlock RAK15001 compatible with all RAK development boards?\u003c\/summary\u003e \u003cp\u003eThe RAK15001 is compatible with any RAK WisBlock board featuring IO expansion slots with standard WisBlock connectors. This includes popular boards like RAK4631, RAK3172, and RAK5005-O. However, verify your specific board's documentation to confirm IO slot availability and SPI pin assignments. Some boards may have limited IO slots if other expansion modules are already installed. Contact our technical support team with your board model number for compatibility confirmation.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your WisBlock RAK15001 Flash Module GigaDevice GD25Q16 today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy WisBlock RAK15001 Flash Module GigaDevice GD25Q16 Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743650459905,"sku":"TTD-8421","price":876.62,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/f8de818b909100b0afbafa7078f3c856.jpg?v=1778060991"},{"product_id":"adafruit-2345-rgb-matrix-hat-rtc-for-raspberry-pi-mini-kit","title":"Adafruit 2345 RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit","description":"\u003cp\u003eThe Adafruit 2345 RGB Matrix HAT is a professional-grade expansion module that combines a 32x32 RGB LED matrix interface with an integrated Real-Time Clock (RTC) for Raspberry Pi single-board computers. Electronics engineers, IoT developers, and embedded systems professionals use this HAT to create dynamic visual displays, data dashboards, and time-synchronized applications without requiring complex wiring or external power management. This product solves the challenge of adding synchronized timekeeping and high-brightness visual output to Raspberry Pi projects while maintaining clean GPIO integration and minimal code complexity.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003eSpecification\u003c\/td\u003e \u003ctd\u003eDetails\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Type\u003c\/td\u003e \u003ctd\u003eRGB LED Matrix HAT with Real-Time Clock Module\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBrand\u003c\/td\u003e \u003ctd\u003eAdafruit Industries\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel Number\u003c\/td\u003e \u003ctd\u003e2345\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOrigin\u003c\/td\u003e \u003ctd\u003eOriginal\/Authentic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLED Matrix Resolution\u003c\/td\u003e \u003ctd\u003e32x32 pixels (1024 total LEDs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eColor Depth\u003c\/td\u003e \u003ctd\u003e16-bit (65,536 colors per pixel)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRTC Module\u003c\/td\u003e \u003ctd\u003eDS1307 with I2C Interface\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Input\u003c\/td\u003e \u003ctd\u003eDedicated 5V connector for LED matrix\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eGPIO Interface\u003c\/td\u003e \u003ctd\u003eParallel RGB interface with level shifting\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatibility\u003c\/td\u003e \u003ctd\u003eRaspberry Pi Model A+, B+, 2, 3, Zero and variants\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: RGB LED Matrix HAT with Real-Time Clock Module\u003c\/li\u003e\n\u003cli\u003eModel Number: 2345\u003c\/li\u003e\n\u003cli\u003eLED Matrix Resolution: 32x32 pixels (1024 total LEDs)\u003c\/li\u003e\n\u003cli\u003eColor Depth: 16-bit (65,536 colors per pixel)\u003c\/li\u003e\n\u003cli\u003eRTC Module: DS1307 with I2C Interface\u003c\/li\u003e\n\u003cli\u003ePower Input: Dedicated 5V connector for LED matrix\u003c\/li\u003e\n\u003cli\u003eGPIO Interface: Parallel RGB interface with level shifting\u003c\/li\u003e\n\u003cli\u003eCompatibility: Raspberry Pi Model A+, B+, 2, 3, Zero and variants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose Adafruit 2345 RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Adafruit 2345 RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit\u003c\/h2\u003e\u003cul\u003e \u003cli\u003e32x32 RGB LED Matrix with 16-bit color depth delivers 65,536 color options per pixel for vibrant, photorealistic visual output in professional display applications\u003c\/li\u003e \u003cli\u003eIntegrated DS1307 Real-Time Clock maintains accurate timekeeping with coin-cell battery backup, enabling synchronized scheduling without internet connectivity\u003c\/li\u003e \u003cli\u003eBuilt-in 5V to 3.3V level shifting protects Raspberry Pi GPIO pins while driving 5V LED matrix logic, preventing damage from voltage incompatibility\u003c\/li\u003e \u003cli\u003eDedicated power input connector supplies independent 5V power to the LED matrix, isolating high current draw from the Raspberry Pi's limited power budget\u003c\/li\u003e \u003cli\u003ePython library support with comprehensive documentation enables rapid development and integration into existing Raspberry Pi projects\u003c\/li\u003e \u003cli\u003eHAT form factor provides secure physical mounting and standardized GPIO connection, eliminating breadboard wiring complexity\u003c\/li\u003e \u003cli\u003ePayment Options: UPI, credit\/debit cards, net banking, EMI available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eIndustrial Control Dashboards: Display real-time sensor data, temperature readings, and system status on high-brightness RGB displays with synchronized timestamps for process monitoring and compliance logging\u003c\/li\u003e \u003cli\u003eIoT Data Visualization: Create networked information displays that show live metrics from cloud platforms, weather stations, or local sensors with color-coded alerts and time-stamped event logging\u003c\/li\u003e \u003cli\u003eAutonomous Signage Systems: Build portable digital signs for retail environments, transportation hubs, or event venues that operate offline with internal timekeeping for scheduled content updates\u003c\/li\u003e \u003cli\u003eEducational Robotics Projects: Enable students to create interactive visual feedback systems for robot navigation, game development, and real-time sensor visualization with accurate event timing\u003c\/li\u003e \u003cli\u003eHome Automation Interfaces: Design custom control panels that display system status, schedule information, and alerts with synchronized clock display for smart home coordination\u003c\/li\u003e \u003cli\u003ePrototype Development: Rapidly test LED matrix applications, develop custom display drivers, and validate timing-critical applications before production deployment\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eHow to Use\u003c\/h2\u003e\u003cp\u003eInstallation begins by stacking the Adafruit 2345 HAT directly onto your Raspberry Pi's GPIO header, ensuring proper alignment with the pin layout for your specific Pi model. Connect the 32x32 RGB LED matrix panel to the HAT's ribbon connector, taking care to match the pin orientation marked on both connectors. Provide dedicated 5V power to the HAT's power input connector using an external power supply rated for at least 5 amps, as the LED matrix requires substantial current that exceeds the Raspberry Pi's onboard power capacity. Before powering on, verify that the I2C interface is enabled in Raspberry Pi configuration settings by running raspi-config and enabling I2C under Interfacing Options.\u003c\/p\u003e\u003cp\u003eOnce hardware is connected and powered, install the Adafruit RGB Matrix library using pip with the command: pip install adafruit-circuitpython-rgb-matrix. The library includes sample Python scripts that demonstrate basic operations like drawing pixels, displaying text, and reading the RTC. Access the RTC functionality through the integrated I2C interface using the Adafruit CircuitPython RTC library, which handles date and time management with simple commands like rtc.datetime to retrieve the current time. For production applications, implement error handling for I2C communication timeouts and include battery backup verification routines to ensure RTC accuracy during power interruptions. Test your implementation with the provided example scripts before deploying custom code to production environments.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Adafruit 2345 RGB Matrix HAT operates as a dedicated interface controller that manages the complex multiplexing and timing requirements of RGB LED matrices. The HAT uses a high-speed parallel interface to drive up to 1024 individual LEDs (32x32 configuration) with 16-bit color depth, enabling 65,536 color combinations per pixel. The integrated DS1307 RTC module maintains accurate time and date information even when the Raspberry Pi is powered down, communicating via I2C protocol on GPIO pins 2 and 3. The HAT includes a dedicated power input connector to supply the substantial current required by the LED matrix independently, preventing voltage drops that would affect the Raspberry Pi's stability.\u003c\/p\u003e\u003cp\u003eThis specific mini kit configuration includes the HAT PCB, a 32x32 RGB LED matrix panel, power connectors, and comprehensive documentation with Python libraries for immediate implementation. The design features built-in level shifting to protect the Raspberry Pi's 3.3V GPIO pins from the 5V logic levels of the LED matrix, and includes convenient mounting holes for secure installation. The RTC functionality eliminates the need for network time synchronization in offline applications, making it ideal for remote monitoring stations, autonomous signage systems, and industrial control interfaces where accurate timestamping is critical.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e \u003csummary\u003eWhat is the maximum brightness and power consumption of the 32x32 LED matrix?\u003c\/summary\u003e \u003cp\u003eThe RGB matrix can display full brightness across all 1024 LEDs simultaneously, consuming approximately 4-5 amps at 5V when displaying white color at maximum intensity. Individual pixel brightness can be controlled via PWM to reduce power consumption for battery-powered applications. Typical operating current ranges from 1-5 amps depending on displayed content, making a 5-10 amp power supply recommended for reliable operation without voltage sag.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eHow long does the RTC battery backup maintain time accuracy?\u003c\/summary\u003e \u003cp\u003eThe DS1307 RTC module includes a CR2032 coin-cell battery that maintains timekeeping for approximately 2-3 years in typical conditions when the Raspberry Pi is powered down. The accuracy is approximately 1-2 minutes per month depending on temperature stability. The battery is user-replaceable, and we recommend checking battery voltage periodically in critical applications to prevent unexpected time loss.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eCan I use this HAT with Raspberry Pi Zero or older Pi models?\u003c\/summary\u003e \u003cp\u003eYes, the Adafruit 2345 HAT is compatible with Raspberry Pi Zero, Zero W, Model A+, B+, 2, 3, and 4 models that feature the 40-pin GPIO header. However, Raspberry Pi Zero requires careful power management due to its limited onboard power capacity, and we recommend using an external USB power supply rated for at least 2 amps in addition to the dedicated 5V supply for the LED matrix.\u003c\/p\u003e \u003c\/details\u003e\u003cdetails\u003e \u003csummary\u003eAre bulk discounts available?\u003c\/summary\u003e \u003cp\u003eYes, wholesale pricing for orders of 10 or more units. Contact our sales team via WhatsApp or email for a customized bulk quote.\u003c\/p\u003e \u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Adafruit 2345 RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Adafruit 2345 RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743655506177,"sku":"TTD-8532","price":14110.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/4f7b490c034cf4a1f81e4e6cd6c09130.jpg?v=1778061120"},{"product_id":"rak15002-wisblock-sd-card-module","title":"RAK15002 WisBlock SD Card Module","description":"\u003cp\u003eRAK15002 WisBlock SD Card Module\u003c\/p\u003e\u003ch2\u003eWhy Choose RAK15002 WisBlock SD Card Module?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eYes — message us on WhatsApp for bulk or business pricing on RAK15002 WisBlock SD Card Module.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your RAK15002 WisBlock SD Card Module today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy RAK15002 WisBlock SD Card Module Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743656423681,"sku":"TTD-8553","price":629.64,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/0a4d74944e72681e66e9f34bca5aae61.jpg?v=1778061153"},{"product_id":"arducam-b012001-multi-camera-adapter-module-v2-2-for-raspberry-pi-camera-module-3-12mp-imx708-5mp-ov5647-8mp-imx219-12mp-imx477-cameras","title":"Arducam B012001 Multi Camera Adapter Module V2.2 for Raspberry Pi Camera Module 3 12MP IMX708 \/ 5MP OV5647 \/ 8MP IMX219 \/ 12MP IMX477 Cameras","description":"\u003cp\u003eArducam B012001 Multi Camera Adapter Module V2.2 for Raspberry Pi Camera Module 3 12MP IMX708 \/ 5MP OV5647 \/ 8MP IMX219 \/ 12MP IMX477 Cameras\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eImage Sensor\u003c\/td\u003e \u003ctd\u003eIMX708\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eResolution\u003c\/td\u003e \u003ctd\u003e12MP\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Platform\u003c\/td\u003e \u003ctd\u003eRaspberry Pi\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003ch2\u003eWhy Choose Arducam B012001 Multi Camera Adapter Module V2.2 for Raspberry Pi Camera Module 3 12MP IMX708 \/ 5MP OV5647 \/ 8MP IMX219 \/ 12MP IMX477 Cameras?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e100% Authentic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGST Invoice\u003c\/strong\u003e - A GST invoice is included with every order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpert Support\u003c\/strong\u003e - Dedicated technical help on WhatsApp and email.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan-India Delivery\u003c\/strong\u003e - Shipped across Bengaluru, Delhi NCR, Hyderabad and all of India.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrusted by Makers\u003c\/strong\u003e - Used by students, hobbyists and professionals nationwide.\u003c\/p\u003e\u003ch2\u003eKey Features of Arducam B012001 Multi Camera Adapter Module V2.2 for Raspberry Pi Camera Module 3 12MP IMX708 \/ 5MP OV5647 \/ 8MP IMX219 \/ 12MP IMX477 Cameras\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eBuilt around the IMX708 image sensor for consistent, well-documented image quality\u003c\/li\u003e \u003cli\u003ePlug-in module for Raspberry Pi\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003ePerfect For\u003c\/h2\u003e\u003cul\u003e \u003cli\u003eComputer vision and object-detection prototypes on Raspberry Pi \/ Jetson boards\u003c\/li\u003e \u003cli\u003eTime-lapse photography and remote monitoring setups\u003c\/li\u003e \u003cli\u003eDIY security and surveillance camera builds\u003c\/li\u003e \u003cli\u003eRobotics and drone vision systems\u003c\/li\u003e \u003cli\u003eComputer vision and machine-learning projects on a Raspberry Pi or Jetson platform\u003c\/li\u003e\n\u003cli\u003eRobotics navigation, object detection and tracking\u003c\/li\u003e\n\u003cli\u003eDIY security and monitoring camera projects\u003c\/li\u003e\n\u003cli\u003eEmbedded imaging for kiosks, inspection rigs and automation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you provide a GST invoice?\u003c\/summary\u003e\u003cp\u003eYes, a GST invoice is available on every order.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eCustomer Support\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e techdepotindia@gmail.com\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhatsApp:\u003c\/strong\u003e Available for setup and troubleshooting help\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder your Arducam B012001 Multi Camera Adapter Module V2.2 for Raspberry Pi Camera Module 3 12MP IMX708 \/ 5MP OV5647 \/ 8MP IMX219 \/ 12MP IMX477 Cameras today and start building your next project.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eBuy Arducam B012001 Multi Camera Adapter Module V2.2 for Raspberry Pi Camera Module 3 12MP IMX708 \/ 5MP OV5647 \/ 8MP IMX219 \/ 12MP IMX477 Cameras Online in India\u003c\/h2\u003e","brand":"The Tech Depot","offers":[{"title":"Default Title","offer_id":48743662027009,"sku":"TTD-8658","price":6480.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/1577\/3185\/files\/50e8df5c72a4471bd4130782b1c652c7.jpg?v=1778061313"}],"url":"https:\/\/techdepot.in\/collections\/shields-hats-expansion-boards.oembed","provider":"Tech Depot India","version":"1.0","type":"link"}